I'm trying to sort this spread sheet so that each email address will have its own column assigned to it. Ie jaz@hello.com will alway be column C and harry@hello.com will always be in D. The problem is I've around 1200 rows of infor and the email addresses are all over the place..
View 5 RepliesI'm managing a World Cup Prediction League and have been trying to create a spreadsheet that will eventually feed in to a league, positioning each player in descending order. However, I would like to use three columns to determine how to position the players.
EG.
Priority 1 - Column D - Total Points (Rank from Highest to Lowest)
(if there are players with equal Total Points in column D, then)
Priority 2 - Column F - Correct Scores (Rank from Highest to Lowest
(if there are still players with equal value after Total Points and Correct Scores, then)
Priority 3 - Column F - Incorrect Scores (Lowest to Highest)
I've tried for hours to work this out but can't. It would save me hours of work each day
I have attached the document : WC Prediction League EXAMPLE.xlsx
Here is my VBA code so far, it sorts relevant email with data in it into spreadsheet titled "Mon 1st" "Mon 2nd" "Tue 1st" "Tue 2nd" ... and so on
But I've changed the name of the spreadsheet into "yyyy-mm-dd" format, amend the codes.
olMDate = olMail.SentOn
'Amend this line
wsDest = UCase(Left(WeekdayName(Weekday(olMDate) - 1), 3))
If TimeValue(olMDate) < #12:00:00 PM# Then
wsDest = wsDest + " 1st"
[Code].....
I have a spreadsheet (rows 1-15) where column A is a list of items in ascending order, and column B shows the catalog# that the item appears in. An items can appears in multiple catalogs.
I would like to develop a spreadsheet(rows 18-21) that shows the items that appears in each catalog.
The items should still be in ascending order.
The order of the catalog# row18 does not matter.
I have several hundred items and 30 catalogs....
I have a very large inventory spreadsheet (30,000+ lines) where finished goods are listed on one line and the raw materials (parts) that make up that finished good are listed below. After the last raw material for a finished good is listed, the next finished good is on the next line (and so on). First, I need to sort the lines to eliminate certain common raw materials. Next I need to take the lowest raw material inventory level and have that as the default inventory level for the finished good.
View 2 Replies View RelatedWorkbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedI have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies View RelatedOften I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies View RelatedIt also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies View RelatedWondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
I wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
I have a spreadsheet that on open needs to open a 2nd spreadsheet minimised and delete 2 named sheets in the 2nd spreadsheet.
On close of the first spreadsheet it should then copy 2 sheets with the same name from itself into the 2nd spreadsheet.
This is to start a spreadsheet that will track project risks and issues that I will post further details for as other functions are required.
how to create the database and the resulting Pivot Table. My Sales Database includes the Sales $ and GP$ for each line. In the Pivot Table I've managed to create a calculated field for GP %, no problem.
i have also managed to figure out how to express each Row as a % of the Pivot Total, also very easy.
What I need to know is how can I sort my Pivot Table High to Low using these calculated fields?
I don't understand all of it, but I observed that it works only with mp3 with tag id v1, not v2, anyway I also see another code for tag id v2 given by NateO.
But before entering in detail of what I want, is it possible to edit tag id v1 or even v2, with VBA? Because I want to complete my mp3 informations that are missing, or modify the wrong one, in excel, and then with a macro update my mp3 files...
I've found this code on the forum to get my mp3 informations :
Option Explicit
Public Type mp3Info
Header As String * 3
Title As String * 30
Artist As String * 30
Album As String * 30
Year As String * 4
Comment As String * 30
Genre As Byte
End Type
Sub Getmp3Info()
Dim mp3ID As mp3Info
Dim lngRow As Long, lngFile As Long
Dim lngFileCnt As Long
With Application.FileSearch
.NewSearch
.Filename = "*.MP3"
.LookIn = "H:Daniel" 'Change this to the folder you wish to search
.SearchSubFolders = True........................
I have a sheet with fixed number of rows but variable number of columns. I have to sort this sheet on the basis of column A starting A2. i am using the following code
Range("A1", Range("A1").End(xlToRight).End(xlDown)).Select
Selection.Sort Key1:=Range("A2"), Order1:=xlAscending, Header:=xlYes
But it does not sort properly. To illustrate, i have 10 rows, some 4 columns wide and some 5 columns wide. Since the first row is 5 columns wide , all the rows with 5 columns populated get sorted but the rest get left out.
This is an example of what is being worked on:
(There are 500+ more lines like the ones below, in groups of approximately 17 lines per page of information.)
* C.B.A. Bank - 2nd reference to branch near Mike's store. (21/03/1956)
* Berwick exams results. (06/06/1877)
* Berwick exams (09/05/1877)
* Steps taken for erection of Berwick. (11/07/1874)
* Berwick tenders for work at home. (11/07/1877)
* W. was a storekeeper at Berwick. (25/07/1881)
* Berwick Brass. (27/06/1877)
* Commercial erected for son. (27/06/1878)
I need to do the folowing to it:
(not necessarily in the following order)
- Insert into Excel
- Remove brackets
- Sort chronologically
- Copy back into program I am using again, in same chronological order.
The desired outcome is to be able to throw into Excel all the lines and press a button, (possibly the Sort Ascending one) and have a chronological list of all entries.
I have a table which holds scores as well as other data for players. Is it possible to automatically sort a table based on their points score to see who is top of the league?
View 9 Replies View RelatedIs there a code or some way for me to sort 4 columns together? I want to sort a list of employees and for each employee theres a column with their Lost Business, customer satisfaction, and two more columns. I want to sort all the columns at the same time so that the best employees overall will go to the top of the list and the worst ones will be at the bottom. Whenever I use the sorting feature it does each column independant of the others so everytime I sort a new column it just moves around the last one I sorted.
View 14 Replies View RelatedI have five columns of data A to E. In each row there can be data in either 2 3,4 or 5 of the columns. What I want to do is essentially condense the data. So in columns, say, G,H,I J,K if there is data in column A then It goes into column g, if not it asks if there is any data in column b and so on. Then for H it does the same but one on. I have attached an example to show what I would like to happen.
View 9 Replies View RelatedI created a data base that had a hyperlink to a plan of the store so we can find parts easy. With a lot of help for people here on this web site, it works very well.
My only problem now is that I sorted my Database by the hyperlink column. It made it easy to do one hyperlink and pull the fill handle down for the rest of the same hyperlink reference.
When I went to resort the database so that the parts were in alphabetical order. The sort worked well except that the hyperlink for lets say cell F87 was not sorted. Example : - F87 hyper link presort had the reference to Rack 10 self B. Post sort it had the reference to Rack 16 shelf C. But when clicked on it still took you to Rack 10 self B.
how can data sorted be more frequency as most frequent on top and as the following:
1
1
1
2
2
3
3
3
3
to
3
3
3....................
i attach file
I have around 1900 dates that I need to sort into order but I need the data to be displayed as DD/MM in chronological order eg 01/01, 02/01 etc.
At the moment the dates are DD/MM/YYYY in one column. Have tried sorting them into date order but have found that they're sorted by YYYY. Is there a way of sorting them DD/MM instead?????
I should sort numbers in ascending order from left to right, but the numbers sort only from right to left.
This is what I want:
1.3.2.2
1.4.1
2.1.1.1.1
3.2.3.12
3.3.1
And this is how it goes:
2.1.1.1.1
3.3.1
1.4.1
1.3.2.2
3.2.3.12
There are also numbers that have letter at the end (1.2.3a), and the cell format is text.
I have an array of data that I need sorted. I did a Custom Sort. However, the data did not all sort properly (some of it did). Any ideas as to why this happened and how I can get it to sort correctly?
View 5 Replies View Related