Get Totals From One Sheet In Spreadsheet To Show On Another Spreadsheet?
Apr 7, 2014
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
View 3 Replies
ADVERTISEMENT
Dec 6, 2013
Is it possible to set something up on a spreadsheet which shows who last updated a cell and when they did it? I have a huge spreadhseet with lots of data on which gets updated by a number of users, they update a lot of different cells and this leads to errors being made with the data in the spreadsheet.
is a way I can show who updated a cell and what date - is this doable?
View 5 Replies
View Related
Aug 6, 2008
I am trying to create a spreadsheet that will show vacation time; accrued, taken, leftover. There are different accrual rates for years of service, and caps on carryover.
I have been trying to figure this out, however the accruals for employees over 1 year are higher than they should be.
Breakdowns are as follows:
1-2 years - 1 week vacation - 40 hours eligible for carryover each year
3-4 years - 2 weeks vacation - 80 hours eligible for carryover each year
5-9 years - 3 weeks vacation - 120 hours eligible for carryover each year
10+ year - 4 weeks vacation - 160 hours eligible for carryover each year
View 9 Replies
View Related
Jan 23, 2012
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies
View Related
Jan 4, 2010
I have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
View 4 Replies
View Related
Aug 11, 2013
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
View 6 Replies
View Related
Jun 26, 2008
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies
View Related
May 15, 2012
I am trying to show the date in a spreadsheet as the month and the year.
The date is in B2 30/04/2012 and i want it to show in C2 as Month/Year.
I am currently using =month(B2) which shows it as a no ( 4 ). Can i make it show as month / year?
View 4 Replies
View Related
Feb 6, 2009
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
View 3 Replies
View Related
Jan 13, 2010
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
View 13 Replies
View Related
Feb 10, 2009
I am trying to do a query against my database using MsQuery, but I am having a problem with it...
One of the tables in my database stores information as Binary (Bits) instead of actual text.... When I create the Query in MsQuery, the text is displayed as desired...but when I send it to Excel that column is not displayed..
Does anyone have any ideas on how I can get it to send the column to Excel?
See attached for what I mean. The Bits column shows in MSQuery, but not in Excel.
View 14 Replies
View Related
Jun 14, 2013
I want to show numbers on my excel spreadhseet in thousands. However, the challenge is I want to show negtive numbers in red within brackets. For instance, I have a number -104,784,089. I want to display it as (104,784) in red color. Similarly, I want to show 577,090 as 577. Is there a customer formatting I can set up in excel that do that?
View 2 Replies
View Related
Mar 11, 2012
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies
View Related
Apr 14, 2007
It also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies
View Related
Apr 2, 2014
Wondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
View 6 Replies
View Related
Apr 24, 2006
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
View 7 Replies
View Related
Apr 3, 2007
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
View 9 Replies
View Related
Nov 4, 2012
I wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
View 7 Replies
View Related
Sep 6, 2005
"DRHannay" wrote:
> how do I place the sheet tab name in my spreadsheet by formula?
>
> Excel 2003
Try:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
View 14 Replies
View Related
Jan 24, 2014
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
View 5 Replies
View Related
Jul 12, 2013
Every week I receive a sheet of data that I need to import into my master spreadsheet. The problem is I have to adjust the data I receive to import it unless there's a better way of doing it. I'm trying to automate both the modification and the importing of this sheet. I've tried to create a macro to modify and import without any success.
To adjust the spreadsheet I receive I need to: delete or find a way to exclude the first 3 rows, the bottom row with data stating "complete" and columns C,D&E from being imported; change font, size, color, bold to match the main spreadsheet in addition to formatting; split data in column A and remove any special characters. Formatting is important because I have to be able to easily remove duplicates. Also, the number of rows in the sheet I receive changes weekly.
I've attached a workbook with sample data. The first sheet is representative of what my master looks like, the second is what I sent and the third what I've been modifying it to and then importing. As stated before, I'd like to have my master automatically update with the sheet I sent, but I'm at a loss having to reformat everything every week before importing. Having the sheet that's sent to me revised before I receive isn't an option. What's the best way to automate this?
SAMPLE1.xlsx
View 1 Replies
View Related
Nov 8, 2012
I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
View 6 Replies
View Related
Jan 8, 2010
We run a fairly small start-up company and I would'nt mind knowing if it was possible to have some kind of stock control system on 'worksheet1'. On 'worksheet2' have some kind of 'Till Style' GUI interface where you can input the products the customer purchased. And then maybe of 'Worksheet3' have a printable recipet which you can hand to the customer.
Of course the idea would be for what-ever is purshased via the 'Till-Style' GUI on 'worksheet2' to alter the stock QTY on 'worksheet1'.
View 9 Replies
View Related
Jun 11, 2006
I have two sheets,one called pattern of about 25000 rows and one called rp1,
which is a fresh sheet downloaded each night from the web. What I want to do is select the names in column 3 of rp1 and printout in the same or a new sheet every row containing this name from the pattern spreadsheet.So for every horse named in col c,I want its complete record,could be 1 row or maybe up to 20 rows output,from the pattern worksheet(for each). They will all be underneath each other. I simply want excel to extract all the data belong to these names in rp 1 from the pattern large sheet. The names are in col r of the pattern sheet.
View 3 Replies
View Related
Nov 22, 2008
I have created a spreadsheet that has information about networks, subnets etc..
The top header for both companies in (CSV format) reads:
Network Namenet_addr1net_addr2net_addr3mask_lengthorg_idcidrlast_upd_dt
I basically split the spreadsheet to show both side by side.
I have this information for both networks that I am trying to compare what subnets, names, IP address etc... over-lap.
We are merging two companies into one, and I need to identify or highlight what information on both companies over-lap.
View 9 Replies
View Related
Jul 25, 2006
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies
View Related
Nov 27, 2012
I used to use Excel many many years ago for all my basic business databases and pivot table reports (so was at a basic competency level) and want to use it again but it has been quite a while and I can't remember how to do the following.....
I want to build a database of sales and purchase info in say 'sheet 1' - let's say 30 different headed columns and then many lines of different information under each column.
In 'sheet 2' I want to create an invoice template of my own design (I can do easily) for printing.
This template will need to extract say 10 bits of information from a particular row and then put them in a certain place on this sheet.
How can I type in one piece of information in a cell on sheet 2 (say the invoice or line number of the database) and that will then trigger all the other needed information from that particular line in sheet one onto this template?
I know it can be done but for life of me can not remember the formulas to use for these other cells in sheet 2 based on the info put in that one 'trigger' cell
View 4 Replies
View Related
Feb 27, 2009
[Excel 2003] I have 2 spreadsheets: one to summarize data from a 2nd detail spreadsheet. I'm analyzing work order information for a service operation.
I'm using dynamic name ranges, as follows, for the detail:
WO_Num =OFFSET('WO Tracking Log'!$A6,0,0,COUNT('WO Tracking Log'!$A:$A),1)
Other detail data is defined as these examples show:
GM_X =OFFSET(WO_Num,0,8)
OpenDate =OFFSET(WO_Num,0,1)
All detail data begins in Row 6 in the detail spreadsheet.
In the Summary spreadsheet, it appears to make a difference where my calcs are located in order for my COUNTIF's to work correctly. As long as I keep my summary calc (to total the number of work orders in the detail) in Row 2 of the Summary, it works fine...but if EITHER I move my calc down a row OR if my detail drops down a row because a row was added above (where I have just header info), my summary totals change?!?! I don't understand.
Here are two examples of the calcs I'm using in the summary:
=COUNTIF(WO_Num,">0")
=COUNTIF(GM_X,"X")
Can someone tell me what is going on? What I'm doing wrong?
View 8 Replies
View Related
Oct 27, 2009
I have a spreadsheet that on open needs to open a 2nd spreadsheet minimised and delete 2 named sheets in the 2nd spreadsheet.
On close of the first spreadsheet it should then copy 2 sheets with the same name from itself into the 2nd spreadsheet.
This is to start a spreadsheet that will track project risks and issues that I will post further details for as other functions are required.
View 9 Replies
View Related
Jan 24, 2014
I have a master tab in a spreadsheet where it contains account #'s (A); their respective account name (B); sales rep (c); region (d) & notes on the account(e)
I also have tabs for each individual region on the spreadsheet.
I was wondering that once I update any of the cells on the individual region tabs...if that could automatically update on the master tab, where that account etc is located...or would it be easier to update the master tab with notes; change in rep, etc...and have that automatically fill over on the individual tabs?
View 5 Replies
View Related
