Start Every Page With The Same Columninformation, Even When Filtered

Jan 15, 2007

I am working on a few sheets I need to print. Every print needs to start with the same ColumnInformation. Sometimes more rows are needed than other times. When I don't need a row, I will filter the blanks causing the ColumnInformation at the start of the page to "go up" to the previous page. Is there a way to prevent this from happeningen? To lock or freeze the ColumnInformation and make the rows below the ColumnInformation to "go up" past the ColumnInformation onto the previous page?

For example:

I've got 36 rows a page.
Rows 1-5 indicate the ColumnInformation
Rows 6-36 are devided in 10 groups of 3 persons;
so 6-9 is a group, 10-12 is a group, 13-15 is a group, etc.
Rows 37-41 is the ColumnInformation again but on the second page
Rows 42-44 till 69-72 are the groups on the second page

However sometimes the groups have only 2 persons in it. When I filter the blanks (10 times 1 row), the ColumnInformation from row 37-41 and the 5 rows after that are going to the first page. I need to know how to let the ColumnInformation stay on the second page, and let rows 42-51 move to the first page.

View 2 Replies


ADVERTISEMENT

Change Start Page Of Multi Page UserForm

Jul 23, 2006

Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.

CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3

Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?

View 2 Replies View Related

Find Last Visible Row On Filtered Page?

Apr 11, 2014

[Code] ....

I have a page ("Property Register" with some 22 rows of data. I apply the filter as per the code and I can now visually see a header and two data rows which is what I need to have.

the row number of the last visible entry (actually showing as the third on the filtered page) is row 7, again correct as row 7 of my original page has the last value I am trying to find.

However, both of the two "last_row" lines return me a value of 7 whereas I really need it to be three.

Seems to me that I must have the wrong approach (s) to finding the last row so that I can only process the visible rows (I don't need the actual row at all because my processing depends on a cell value in the row).

View 12 Replies View Related

How To Start Footer With Different Page No Instead Of 1

Mar 13, 2012

How to start footer with different page no instead of 1.

i mean i want to start from 32 on wards.

View 5 Replies View Related

Page Break Preview It Shows The Page Numbers In The Centre Of The Page

Jun 9, 2009

When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.

View 3 Replies View Related

Put In Error Handling In Case The Format Of The Page Changes Or The Internet Page Is Unavailable

May 18, 2006

I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.

Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................

View 6 Replies View Related

Can't Move Page Breaks In Page Break Preview

Mar 26, 2006

I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?

View 7 Replies View Related

Print To Fit All Rows And Column On One Page And Take Up Entire Page?

Oct 16, 2013

I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.

View 4 Replies View Related

Printing One Page Grayscale And One Page Color With Code

May 21, 2009

I have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.

View 2 Replies View Related

Countif Formula: Take Data From One Page And Graph It On Another Page

May 1, 2009

I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:

A B

1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01

I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.

View 3 Replies View Related

Transfer Specific Data On Each Page To A Different Colum On That Same Page

Mar 15, 2007

I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.

View 2 Replies View Related

Remove Page Numbers In Page Break Preview

May 18, 2007

how to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?

View 3 Replies View Related

Macro To Print Page Based On Active Page

Jun 29, 2007

I need a macro that will print a hidden page that is linked to the page I have active.

It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.

View 3 Replies View Related

Wondering How To Keep Headers Repeating From Page To Page.

Nov 4, 2008

Working with 2000 Excel is bringing some new chalanges. I see things are done different. I am trying now to keep my header to repeat from page to page.

For example I have a header that may say something like:
People, numbers, date, ect. And there are so many new rows they go on for pages long. How can I keep my header on the top of each page when it prints out on paper.

View 5 Replies View Related

Formula On A Page Updated When Any Value On The Page Is Changed

Mar 27, 2009

Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?

For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?

View 3 Replies View Related

Copying 12 Months Data Across The Page To Down The Page

Oct 17, 2008

I have a dataset that is as follows:

Col1 2 3 4 ...... 45

123 456 xxx xxx xxx
100 234 xxx xxx xxx
221 543 xxx xxx xxx
112 234
112 689
122 956
122 234

This goes on from left to right for 45 odd columns.

I need to copy each set i.e set 1 is 123 down to 122 to say cell a25 and then copy the next set i.e. 456 to 234 below the first set.

I need to somehow write a loop code that knows where to get the 2nd, then 3rd set, etc and copy it to the bottom of the preceeding set

View 9 Replies View Related

Fill In Page From Another Page In Workbook

Dec 26, 2013

What I want to do, is to populate the Lois, Beth, Kelly and Shelley pages with the rows from the Que page when they get assigned to one of them. I tried to program then off of a different example in the forum. It didn't work. Will include the copy.

Tracking(HELP).xlsx

View 6 Replies View Related

Showing Current Page Number And Total Page Number In Entire Workbook?

Nov 14, 2013

In my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".

I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.

View 6 Replies View Related

How To Copy Filtered Data Into Filtered Data

Aug 19, 2013

Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.

View 1 Replies View Related

Page Break By Asking The Input File For Page Break To Be Done

Dec 9, 2008

The code which you provided works fine no problem for a page break. I need to run the macro for the page break by asking the input file for page break to be done.

For Example, If excel filename "A" contain the code which you have given need to ask to input the filename "B" and process need to be done in file "B".

I have added some code to your code which you provided but it gives error message "1004" "Method 'Range' of object '_Application' failed" at following line :

Set rng = oExcel.Range(Cells(2, 2), Cells(Rows.Count, 2).End(xlUp))

View 12 Replies View Related

Macro: Clear Page Breaks & Add Page Breaks

Nov 28, 2006

I need to remove all existing page breaks in a document and add a page break every 72 rows. I've tried some similar codes from this forum with other functions that I don't need in it.

View 7 Replies View Related

Page Header: Print The Header On Page One Only

Mar 5, 2009

I have a booklet I want to print from Excel 2000. I'm not seeing how to have the HEADER on page one only. The header is coming up on all pages. Is there a way to tell Excel to print the Header on page one only?

View 2 Replies View Related

Sum Up Filtered Data Only?

Jan 2, 2014

I have been trying to find a way to sum up/only show the filtered data in a sheet.

i want to beable to filter the data by year and then only show sum up the data shown not
the entire column, is there a formula that will let me do this?

View 3 Replies View Related

AutoFilter Is ON But Not FILTERED

Apr 16, 2014

I have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.

For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.

Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.

So far, no good luck..

View 1 Replies View Related

SUM Of Filtered Results

Feb 2, 2009

I have a monthly work phone bill which I receive as an Excel document. I have to pay for personal calls and want to create a list of personal numbers which can be filtered and the costs summed. Prefereably an add in would be best. Possibly 2 icons, one for adding my personalised numbers (usually under 10 numbers). This could be saved to my home drive on the network so I can run the formula from any PC on the network.

The other icon would be to run the report and do the calculations. So it only really looks in 2 column (mobile num, cost).

View 14 Replies View Related

VBA: Sum Of Filtered Cells

May 1, 2007

I have several columns on a worksheet that have an auto-filter on top of the column. The last column has numerical data.

I was wondering if there was code when:

As soon as you filter a column the last column would only indicate the data pertaining to whatever was filtered. I would like the sum of that data only. (Visible data) on a pop message box or anywhere on the sheet...

View 9 Replies View Related

Filtered Reports

Nov 13, 2008

I'd like to created a 'Filtered Report' in which data changes based on my selection. For example, in this scenario I have 2 columns, 'Part Type'(you may pick Part1, Part2, Part3) and the 'Results' columns. I have displayed 100 entries(which means at this point they're all displayed, no filters).

When I apply the filter, and I choose Part Type to display Part1 and its "Results', I would like to dynamically be able to display somewhere in that Sheet something like this:

Part Type: Part1
Total: This would be a =sum(of the 2 cells below, in this case it'd be 17)
Pass: 14
Fail: 3

But I'm not sure how to dynamically count it based on what I've filtered, so when I change to Part2, it would give me:

Part Type: Part2
Total: This would be another =sum of the 2 cells below
Pass: 25
Fail: 4

View 9 Replies View Related

Delete A Filtered Row

Feb 15, 2009

I use a filter to isolate one particular row of data. This unique row of data is data to be updated. There is ever only one record filtered, and that record is dynamic from the database of over 500 rows. Row 1 is the header. The filtered row is displayed under row 1 (physical row 2), but can be any of the row numbers according to the filter results. (ie the filter has extracted record (row) 13, and is displayed on physical row 2 below the headers)

How can I delete this filtered row. I can't simply

rows("2:2").Select
Selection.Delete
as this deletes record (data row) 2, not the 2nd physical row. I need to delete 2nd physical row regardless of the value determined by the filter.

View 9 Replies View Related

Get Average Of Filtered Data?

Apr 7, 2014

I have a pivot table with multiple supervisors and emloyees, I need to be able to find the average of a supervisors department and compare it with an employee with the employee seeing everyone else's data.

I don't have access to the original data that drives this pivot table. Is there some way I can use a calculated field to contain the average performance of all the employees under this particular supervisor?

View 3 Replies View Related

Count Filtered Value If Greater Than 0?

Apr 11, 2014

I count D5:D54 filter data but i want count only when value is greater then 0(zero)

[Code]....

I Mean:

d5 = 0 don't count
d6 = 0 don't count
d7 = 0 don't count

if d5:d54 has value greater then 0 then count...

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved