I count D5:D54 filter data but i want count only when value is greater then 0(zero)
[Code]....
I Mean:
d5 = 0 don't count
d6 = 0 don't count
d7 = 0 don't count
if d5:d54 has value greater then 0 then count...
=SUBTOTAL(2,A2:A100) can be used in combination with any other formula so that when the data is filtered using autofilter it will only count values greater than zero.
I have attached a worksheet with the example.
In the attached workbook subtotal formulas are used in Row1 for sum and row 2 for count.
When the data is filtered using code "DUP" in column D, the subtotal in cell C2 is "4", whereas in the specified range there is a positive value in only 1 cell that is $1050 in cell C99.
Is there some combination that can be used with SUBTOTAL formula so that it will only count values greater than zero when data is filtered.
I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))
I want to do is count in a column numbers greater than 13 but less than 20.
I am also trying to write another formula that counts numbers equal to or higher than 1 but less than 12. In other words,
I do not want this count to include any cells that contain 0.
Countif can be used to count the no. of occurrence of a certain value within a range. However, if the range is being filtered, can the no. of occurrence be counted?
View 3 Replies View RelatedIs there a function to count blanks in a filtered column? That is, if I filter a column to show the rows that are blank, can I use the subtotal function (or some other) to count the number of blanks?
View 14 Replies View RelatedTo count the genuine number of rows in a worksheet, I use...
count = Cells.Find(What:="*", SearchDirection:=xlPrevious,SearchOrder:=xlByRows).Row
When I add an auto-filter, the above still works fine.
When the auto-filter doesn't reduce the no. rows, the above returns a value of 1.
I've tried using...
count = Rows.SpecialCells(xlCellTypeVisible).Count
... with a result of 1 if no rows are filtered
So, what is the best way to count the populated number of rows on a worksheet where there is an auto-filter that may, or may not, reduce the number of rows ?
How do I count values in filtered cells?
After I filter for values in Columns(C), I want to count values in Columns(D). When I filter data, I noticed I can manually select the filtered cell range (i.e. Columns(D)) and at the bottom in the Status Bar it will give the correct count. If I cursor over that status bar count it will display "Number of selected cells that contain data." However, I cannot seem to figure out how to get vba to select just the filtered cells selected in that range and count them only and correctly... it instead counts all the values to the last cell in the filtered range.
For example
1) let's say I have a Range("D1:D120') and there are 20 cells containing data in that range.
2) I filter Columns(C) resulting in 10 rows and the rows are 2, 3, 20, 22, 27, 30, 37, 41, 56, 60. Of those 10 rows, there are only 2 cells containing data (let's say cell D20 and cell D37).
3) Now in reality, cells in Range("D2:D60") actually contain 10 cells with values, but since we filtered on columns(C) values... Columns(D) only shows 2 values.
...... here is my problem:
4) If I manually select the filtered range, the status bar "Count" value will correctly sum as "2." But if I code VBA or even "Record a macro code" (obviously incorreclty on my part), it will return a value of 10 for the range of D2:D60 and not on the visible filtered value which is "2."
In an excel sheet A1 to ...... colum i have some cirteria. If I filter a criteria i should get the count for it. Kinldy let me know with out using VB how is it possible.
How do I know how many rows are selected by rngToFilter? I need to add in a conditional statement if its 0.
For Each rngCell In rngUnique
sheetName = rngCell.Value
ThisWorkbook.Worksheets(sheetName).Delete
rngToFilter. AutoFilter Field:=4, Criteria1:=rngCell.Value
rngToFilter.AutoFilter Field:=28, Criteria1:="="
Set rngFiltered = rngToFilter.SpecialCells(xlCellTypeVisible)
Worksheets.Add
rngFiltered.Copy ActiveSheet. Range("A1")
Is there an equation to count numbers greater than zero without adding an additional column?
I had a COUNTIF equation but realized that the criteria that I used to use required an additional column. The additional column I used to have would be something along the lines of =IF(A1>0, "x", "") and then count the X's. I was just wondering if there was another equation that could reduce that step.
I want to look to a range and if there is a value greater than zero I want to count it. I keep going round in circles trying to do this and now I give up.
View 4 Replies View RelatedIs it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
[Code]...
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory???
ERROR#9 OUT:
right I have 5 columns
A
employee id
B
Date exposure
C
Total Exposure
D
First Name
E
Last Name
I want to be able to filter by employee id I'm using this formula below
=SUMPRODUCT(('Excel Exposure Grapth'!B$2:B$4000<>"")*(MONTH('Excel Exposure Grapth'!B$2:B$4000)=1)*('Excel Exposure Grapth'!C$2:C$4000))
but problem I'm getting it count all dates even after the data is filtered
For Example
if I had 2 employee's
EmployeeID 1 had 6 dates in January
EmployeeID 2 had 10 dates in January
if I was to filter to only show EmployeeId 1 it will only show 6 dates but the formula above counts everything even if filter applied
apply a count to a sheet which adjusts when filtered. I have attached a sheet, but as you can see the filter is returning the incorrect count as it is including the rows which are not displyed
View 2 Replies View RelatedFrom a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
Is it possible to count the unique entries in a range based on the results of a filter that has been applied? I basically have a column with 2000+ cells that contain some matching values and I only want to count the unique entries. This will need to be a dynamic count as well as the filter criteria can and will change all the time.
View 14 Replies View RelatedAs the subjects states I need to count the unique entries in a filtered range.
View 7 Replies View RelatedI need to count the number of unique names from a column of filtered text. On the attached example D5 is where I need the value, the current array I have does not work when the filter is applied by changing the product in drop box. I need to have a count of the unique account names from column A.
View 3 Replies View RelatedIs it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
4455ONHIG
4455ONHIG
4455ONHIG
4455ONHIG
4455ONHIG
234234
66555556
66555556
66555556
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory?
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
I'm trying to count all cells in a row after the last number that was greater than 0. See my example spreadsheet. I have put the answers that it should be in to show what I'm after.
[URL]
How can I count the number of cells in a range that contain values that are greater than or equal to zero?
View 2 Replies View RelatedHow do I count cells with numbers 1 and greater. My cells are counting the -. All my cells are showing the - (zero value) but are being counted.
View 12 Replies View RelatedI have the following information on the sheet named "Calculator"
01-Mar-0825510051005.0045'[test.xlsb]Product Price'!$D$256
01-Oct-09274975990.0054'[test.xlsb]Product Price'!$D$27501-Aug-10284981999.0058'[test.xlsb]Product Price'!$D$28501-Dec-10288621634.0058'[test.xlsb]Product Price'!$D$28901-Jan-11289054.00150'[test.xlsb]Product Price'!$D$96601-Sep-1129718001854.00150'[test.xlsb]Product Price'!$D$974
In column f i have the following formula {=CELL("address",INDEX('Product Price'!$D$1:$D$1014,MATCH(B2&E2,'Product Price'!$A$1:$A$1014&'Product Price'!$D$1:$D$1014,0),0))} that returns the cell address from where i want to start my sum function.
My sheet named "Product Price" looks like this:
255Mar-0839508R 45.00256Apr-0839539R 45.00257May-0839569R 45.00258Jun-0839600R 45.00259Jul-0839630R 48.00260Aug-0839661R 48.00261Sep-0839692R 48.00262Oct-0839722R 48.00263Nov-0839753R 48.00264Dec-0839783R 48.00265Jan-0939814R 48.00266Feb-0939845R 48.00267Mar-0939873R 48.00268Apr-0939904R 48.00269May-0939934R 48.00
I now require a formula in column g that will count how many times starting from the cell in given in column f it added the amounts downwards to reach the amount in cell d of the "calculator" sheet - it must thus add d256+d257+d258... until it is bigger or equal to the amount in cell d.
10 12 13 12 10 11
40 30
? ?
Count values in the top row until the sum is greater than the relative value below
In this example the first ? would be 4 as 10 + 12 + 13 + 12 = 47 (greater than 40)
The second ? would be 3 as 12 + 13 + 12 = 37 (greater than 30)
I cant figure out how to do this with a formula! Custom Function needed?
I have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?
View 2 Replies View RelatedHow can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't
think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain
fart.)
I have two columns of data in col A and col B
I wish to count the number of cells in col A that are greater than a defined value in col B.
I would like to know how to count the instances of Cayenne pepper where the final column value is greater than 0
the result desired would be 2 in this example and the first cayenne record would be omitted from the total as it is a value less than 0
0349598
'M'CAYENNE 48G
6
#N/A
[Code]....