I have a range that can have numbers and text in it. I want to strip out anything before and after the number. For example. If any of the cells contain text such as "The price is $4.28 per pound" it would strip out everything except the 4.28. This cell may also contain Japanese yen so you can not use the decimal for reference.
View 14 RepliesI generated my urls to online photos, I referenced cells where some are only numerical (ex. 479) while others contain a numerical/text mix (ex. 3014-RACK). Here is my url code in excel...
View 10 Replies View RelatedI have a text file that has been saved via PL/ SQL code from a CLOB (due to the MSDAORA not supporting CLOBs). Unfortunately, due to passing the file between operating systems it appears that the CR and LF characters are not consistent. This means that my third party application in Excel cannot read the text file properly.
View 2 Replies View RelatedI'm working on an attendance spreadsheet that shows the employee's absence using the format "X####", where X can be one of the following three values: S(for sick time), P(for personal time), and V(for vacation); "####" is the number of hours absent (can be from 0.25 to 8.0,measured in 15-minute increments, # can be either a digit from 0 to 9 or a decimal point, and there can be from 1 to 4 characters, but must be >0(I'm not worried about data validation yet).Examples are P8.0, V.5 (V0.5), S2.75,etc.
The spreadsheet is laid out such that each row represents an employee, and each column is a workday. After the employee's information are three columns labeled P,V, S. I'm trying to generate a formula that when applied to an employee's row, will display a running total of the absent hours based upon personal, vacation, or sick time taken. We'll call the range "CAL"(Short for calender)
To strip out the numeric characters on the right, I use the formula RIGHT(CAL, (LEN(CAL)-1)). To Determine which column the data should be summed in, I use the formula LEFT(CAL,1). Blank Cells are permitted, in fact most of the row will be blank. Now that I've figured out how to strip out the alpha from the numeric, how can I get the totals? I apologize for writing "War and Peace," but I wanted to be as concise as possible-
I have a column that's supposed to be an address, but somehow got the
company name mixed in at the beginning:
123 Main Street
One Park Place
Acme Company, Inc. 456 Easy Street
Alpha-Omega Dry Cleaning Four-Twenty Highway One
I can use the formula
=RIGHT(A1,(LEN(A1)-((MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},A1&"0123456789")-1)))))
for stripping the text before an actual number
Acme Company, Inc. 456 Easy Street
to
456 Easy Street
BUT - I'm not sure how to strip before a text representation of a
number (one, two, three, etc)
Alpha-Omega Dry Cleaning Four-Twenty Highway One
to
Four-Twenty Highway One
I have a cell (A4) on my worksheet that displays 64421 but has a hyperlink associated with it.
I need to use the value in A4 in a vlookup formula, however, I am getting NA# errors when I use it.
Code:
=vlookup(a4,wshgroup("A1:Z500"),4,false)
I suspect that as a hyperlinked value, it does not actually hold the value 64421 needed to match in the vlookup range.
Any way to ensure that the value for A4 is consistent with the numeric data in the lookup range?
I have a list of names that I need to separate into FIRST and LAST names. These names are located in column A. The problem with my initial list is that some of the names have two first names (in the format of Herman & Betty Altenfelder) and some just one first name (such as Tom Frank). Could someone please help me in writing a function that will place the first name(s) in one column (such as column B) and the last name in a different column (such as column C).
View 9 Replies View RelatedI have a macro that needs to work with data including different time from different sources.some of the cells are date and some are text.
I have the following function
Public Function TidyDate(zdate) ' This is coming in as a date #01/02/03 08:00:00#
Dim TempVar1, Tempvar2 As String
TempVar1 = zdate
Tempvar2 = Left(TempVar1, 11) & "00:00:01"
TempVar1 = Tempvar2
[Code] ....
What i need is to change the time of the variable to 1minute past midnight but keep the date the same.
Here is a simple exercise that is necessary only because of the large amounts of data involved.
I have a spreadsheet of columns with budget and actual data. I need to strip out the budget columns (marked as budget) and total column. then add back in at a later date.
It all has to stay in the same spreadsheet.
I know it sounds strange but believe me its necessary.
I was thinking of moving them to the right side of the spreadsheet. Then back at the later step.
I have attached a simple spreadsheet showing the data on sheet1 and how it should look when stripped on sheet 2. and the later step would move them back to sheet3(which is the same as sheet 1).
I have to create a formated file to test our system every other week, I want to create a File Generator using Excel and the replacement values forumla "& A1 &". However the file is in a CSV format containing a lot of quotes and when I attempt to use a line of the file in a formula with "& < Cell> &" excel reports errors, if you accept excels help it strips out the quotes and commas. Anyway around this? having to have a user save the file is CSV format would be to complicated. Sample file attached.
View 2 Replies View RelatedTrying to create a button that, once clicked performs the following task:
Checks whether the text in a cell in the column X2:X40 matches the text in a cell in the Range A2:U14.
If it does, the formatting of the cell in X2:X40 (eg background) must change to match that of the corresponding cell in A2:U14.
Only 1 cell in the range will match 1 cell in the column
For example:
Before click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a clear background
During click:
matches these cells
changes X4 so that it also has a yellow background
After click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a yellow background
I have 2 tabs in a 2013 workbook. Inventory Receipts and lookups. One of the Data verification lookups I have is a drop down list in each cell in Column B (eg: Cat, Dog, Mouse) In the lookups tab I have another cell range containing the sounds (eg: Meow, Bark, Squeak).
What I am trying to acheive is, if B2 contains Cat, then return Meow in B3, if B2 contains Dog then return bark in b3 and if B2 contains Mouse return squeak in B3. Ideally I would like the formula to return the text from my lookup sheet (eg: 'Lookups'!C2,'Lookups'!C3,'Lookups'!C4). So depending on which option they choose from my animal drop down list .. the correct noise would automatically fill in.
I have four cells that contain text. All have connected check boxes with TRUE FALSE.
I need to be able to select anyone one of these cells with a check box, and have it's text appear in one separate cell eg: A1.
I have no issue connecting check boxes etc. I have no issue reproducing the text from any of these cells into multiple cells with a check box. But they have to be selectable and reproducing in one cell only (eg"A1").
As per title, I am trying to compare a column of text cells which contain "Yes" or are empty and a columns of numbers. If they are "Yes" and "1" on the same row, I want to output an "OK" message. Excel seems happy with the following code but it does not work and returns an empty cell if the two conditions are true.
[Code] .....
Here's an interesting one:
A1 contains a text string which is both bold and unbold (
B1 is blank
I need a macro which scans the cells with text and copies the BOLD portions of the text string into the adjacent cell.
Example:
A1
The sky is blue
Macro is run
B1
sky blue
I have a list of text quotes in column A. I then have column B which will have a Y entered if the quote is used in a presentation. I currently have around 100 quotes.
On a separate sheet, I want to be able to effectively say in one cell - If column B has text in it, copy the quote from column A. But the difficult part is how do I make this happen so that I can have multiple quotes being pulled into one cell?
is there a formula that will find a word in a sentence written in a cell and if present then enter specif text in another cell? for example, if the word "Hotel" appears in the sentence in cell A5 then put in the text "Hotel and subsistence" in cell B5...
View 2 Replies View RelatedI'm trying to get something like - If a cell contains certain text AND certain text then display set text OR If a cell contain certain text AND certain text then display set text.
For example:
Vauxhall Corsa 1.5Litre Petrol = vauxhall corsa petrol
Vauxhall Corsa 1.5Litre Deisel = vauxhall corsa Deisel
Vauxhall Nova 1 litre Petrol = vauxhall nova petrol
So it the formula is effectively searching for the car type and the fuel type and then returning the relevant set text. So far I'ver only been able to find IF functions criteria to identify one feature of the text.
I'm thinking it's got to be variation on =IF(ISNUMBER(FIND("Vauxhall Corsa",A1)),"Vauxhall Corsa Petrol") but there should be something else in there like =IF(ISNUMBER(FIND("Vauxhall Corsa"&"Petrol",A1)),"Vauxhall Corsa Petrol")
I know this is wrong but just trying illustrate my thinking. I need it to pick up vauxhall corsa AND petrol. I understand that I would have to stick a lot of IF functions together in a string, but that is fine as long as I can ask it to pick certain text AND certain text within a cell.
I am not sure if this is possible, but worth a shot. I am using a countif function to count a cells and I want it to count only if it has text, followed by a space then more text. I've been able to count the text only followed by a space, but cant figure in the more text part.
View 2 Replies View RelatedI am trying to figure E.g. when A1 is empty i want it to equal a text.
A1 has a text "Quote No" in it permanently until other text is put in
Purpose so that they people know where to enter the applicable text.
I have in Column A (quantity varies A1....An) a list of strings (i.e. file names NameX.txt and in column C I have a long string that contains many file names separated by ; that I extracted from the file name in Column A. what I want to do is to search column C individual text (file names) against the file names in column A. If the file exist in column A, then color only that text (file name) in column C. and so on.
See attached of an example of expected results.
Diery_exc_test.txt
ada_long_xyz_0a1;never_check_hello_2a1;testing_test_te_0a1;name_whatever_done_2a1
tesing1_abc_testy_1a2.txt
filename_xyz_test_1b2;diery_exc_test;Diery_hello_testy_1a2;abc_def_gah_2A1
[Code] ............
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
I have over 600 rows that needs this done.
1,2,3,4
B
[Code]....
I have some text in a cell, which is longer than the width that I am going to make that cell. When I don't wrap the text, it cuts it off at the end of the cell.
Since each column represents a day in a calendar, it would be incorrect to merge the two cells, but I don't want the text hidden, since I need to print the final product.
It is non-numeric text, and i've pasted --> values to remove formula issues.
I have a column C with different text in cells (item's title). Column D - relevant description for each of the items. 100+ rows.
Now, unfortunately, often a spreadsheet with items is updated with many new items. So I get a new spreadsheet with old and new items mixed. I need, somehow, to import descriptions of the old items (Column D of the old spreadsheet) to the new spreadsheet from old spreadsheet. So I want excel to look for old items in column A of the new spreadsheet and, once found, insert a description in the column B from old spreadsheet.
See attachment : Example for forum.xlsx
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies View RelatedI am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
Excel Q.xlsx
I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B
Company 2Country C
Company 3Country C
Company 3Country C
Company 5Country A
Company 5Country C
Company 5Country C
For example:
- For Company 2, a cell containing "Country B, Country C"
- For Company 3, a cell containing "Country C"
- For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
I need to create a macro to do the following:
Search the activecell for a text string (a), and then either paste in text string (b) at the end of the cell if (a) is found, or text string (c) if (a) is not found.
For example, if the activecell has "AA/" in it, I want the cell to become "AA/01" (pasting in "01" at the end), and if the cell has just "AA" in it, I want it to still become "AA/01" (pasting "/01" at the end). The macro will be linked to a commandbutton.
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
View 14 Replies View RelatedI have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
I've look the properties of this to objects and can figure it out.