So I have unitnumber 1000, and it comes in and goes out at different dates with different rates. I want in coulmn K16, the rate applicable for that period. How do I find its value? Lookup? Match? Index? Then in L2 I want it to calculate the total charges per month (given in column K), [URL] ...
View 1 RepliesI have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
I copy/paste the data from this website [URL] ........
How I can sort all the data based upon the "Date"? The date data is not recognized when I copy/paste.
now lets say 'Transaction DB'J:J contains the dates we are searching against. $A contains the Product ID Number and 'Transaction DB'AD:AD contains the total that needs to be summed.
I want to pull information between 10/1/2009 thru 10/31/2009 that match Item Number (from $A on same sheet) to sum the Totals in 'Transaction DB'AD:AD that match all criteria above.
What I've been trying to use:
{=SUMPRODUCT(]]('Transaction DB'!J:J,">="&DATE('Set Date'!$D$2,'Set Date'!$B$2,'Set Date'!$C$2)),]]('Transaction DB'!J:J,"<="&DATE('Set Date'!$D$4,'Set Date'!$B$4,'Set Date'!$C$4)),--('Transaction DB'!D:D,A5),('Transaction DB'!$AD:$AD))}. I get: #NAME?
Start Date End Date
12/1/2007 12/12/2007
Sum(datewise)
Date ID Product Qty
12/1/2007 a 2
12/1/2007 a 2
12/1/2007 c 2
12/2/2007 b 2
12/2/2007 g 2
12/2/2007 j 2
12/3/2007 i 2
12/5/2007 a 2
12/9/2007 a 2
12/12/2007 a 2
12/12/2007 d 2
12/12/2007 l 2
12/12/2007 a 2
1- What formula and macro should I use to sum from Start Date to End Date
2- What formulaand macro should I use to have a sum of particular Id from Start Date to End Date
3- How should stop formula if start date is greater than end date or not in date/number format or if both date cells are blank.
In the little chart on the left, I have the customer name, when their story is due, and when it was completed. On the right, I want to show how many words per hour my journalist is averaging for each week. What I'd like to do in cells J2 through J5 is to have a formula that pulls out the total number of words written for all projects that occurred during that time frame. I can't seem to figure out the formula, though. I was thinking that I needed an array formula starting with ifferror and calling from the row functions, but I can't seem to get it to work out right.
Here's my sample sheet: sample data journalists.xlsx
I want to sum data for our fiscal year (Oct08 - Sep09). I want to put in a formula in Q5 that says to sum the data in B5 through N5 if the dates in
B4 through N4 are Oct08 or greater.
I'm looking to analyse is how long these articles take to reach maturity from their date of publication (so, when they achieve their optimum performance).
I'd then like to further analyse this across various metrics like article type/producer etc., which, I guess, would be in some kind of Pivot Table filter-type-thing.
Here's an example of some of my data:
ArticleName - PublishedDate - OctViews - NovViews - DecViews - ArticleType - Producer
Article1 - Oct-08 - 3701 - 4856 - 4561 - Food - ABCTV
Article2 - Nov-08 - 0 - 9824 - 1256 - Food - ABCTV
Article3 - Oct-08 - 1358 - 8953 - 9652 - Tech - XYZ.com
Article4 - Oct-08 - 1351 - 2354 - 3562 - Tech - ABCTV
The part I'm finding tricky is this; what we'd like to do is rather than look at a specific date (say, articles published on 09/04/08) it would be useful to combine all the dates so that the first month something is published is Month 1, regardless of the date it is actually published.
As the same article can be from the same producer but published at different times, if I could remove the "Jan-Mar = Month 1-Month 3" problem it would allow us to graph all the data into one snapshot of the publishing process and find trends. If this could then be cross examinable by the ArticleType etc. it'd be really useful.
I'd like to do this without having to write a macro and am looking at a possible worksheet function (or combination of functions) that someone could reccomend to get this done.
- I have a tab labelled "Data", in this tab there is a column (lets say C) with dates (in mm/dd/yy format)
- Then on another tab ("Summary") I have a table with each row of column A being the first day of every month (same format).
I want a count of all the dates in "Data" column C that fall between the date on "Summary" A1 and "Summary" A2 and I want to dump this in "Summary" B1.
I've tried COUNTIF, I've tried converting the date to a number, not sure what else to do or if it's even possible.
I have to detect all staff members with the passport expiration dates between two given dates, i.e.
A 12/4/2012
B 5/3/2012
C 7/3/2012
D 6/3/2012
E 9/12/2012
F 12/11/2012
G 11/16/2012
H 10/12/2012
etc
So, I need to have excel detect all staff members with the expiration dates between let's say 9/1/2012 and 12/31/2012.
I have a sheet of data where I need to extract data from between 2 dates, if the result of the 2 dates are
View 1 Replies View RelatedI have a database with dates in coloum F, coloums G to Q is where different product tonnages are entered. Cell Report C2 is the start date and cell C3 is the end date. I can calculate the total tonnage of a product (coloum J) bu using the formula
= Sum(Data!J:J)-Sumif(Data!F:F,""&Report!C3,Data!J:J)
This works but now if I want to total from coloum G through to coloum Q between the dates I cannot get it to work.
I have a problem on matching up two sets of data. One set has a start date/time, and an end date/time. The second set has a single date/time.
Set 1:
Process, Start Date/Time (dd/mm/tt hh:mm) and end Date/Time
e.g
Process 1, 01/01/2009 12:45, 01/01/2009 12:56
Process 2, 24/01/2009 13:45, 24/01/2009 14:02
Process 3, 24/01/2009 14:38, 24/01/2009 14:43
Process 1, 01/02/2009 12:55, 01/02/2009 12:56
Process 2, 08/02/2009 12:35, 08/02/2009 15:21
Set 2:
Event, Date/Time
e.g.
Event 1, 01/01/2009 12:55..................
I need a macro that will, (i) make a copy of the current sheet, (ii) let the user select the month to be selected from a list (Message box), then (iii) delete all other columns in the sheet that is not from the selected month and then, (iv) total the data of the selected month in the empty cell on the right.
The sheet contains data in the following way:
Column A = Description of data in rows
Column B to IV = in each column is a specifics day data
Row 1 = Branch Name
Row 2 = the date in the format 2006/05/16 for 16 May 2006
Row 3 361 = financial data
i am trying to find the formula which will calculate information that is between two dates. for example i have the dates Jan'05 right through to Dec'06 and in each month i have different values eg, Jan is 5, Feb is 10 etc. i need to find a formula which will calculate the data between Aug'05 and July'06.
View 8 Replies View RelatedI have a report which is pulled on a daily basis. I need a macro or a code which searches for the day, one day before the present day, and then custom "Current Day Document Count In" column such that it does not contain "0" and then copy the entire content and then paste in the second sheet. This should be repeated for two days before the present day too. I have attached the spreadsheet, where the first one is the report, second one is where I need the output to be. I have also attached one more "output" sheet to show how the report should look like. I tried to Record a Macro which sticks to the present number of cells, but cannot be used on a daily basis.
View 5 Replies View RelatedI have the following on a user form which works fine.
Private Sub CommandButton1_Click()
Dim rngFind As Range
Dim strFirstAddress As String
With Sheet1.Columns("F:F")
Set rngFind = . Find(TextBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy Sheet2.Range("A" & Sheet2.Rows.Count).End(xlUp).Offset(1, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If
End With
End Sub
I would like to have 2 date entry boxes on the user form and have the macro copy any rows where the date in column F equals or falls between them.
I have a table with 'Product Rereference', 'Date', and 'Estimated Assets' Columns. I need to run a formula that will extract the number in my 'Estimated Assets' column, based on speicific list of 'Product Reference' numbers that I have filetered, and a specific date - 1/31/ of each year.
I've been trying to create a formula, however I can't seem to work it out.
I have attached a file, which should make things a lot clearer :P I am trying to make the data extract into the table to the right. I have filled in the first few columns manually, to show what I would like to formula to achieve.
I'm attaching the test file with one example sheet. Within the same sheet, there is month end dates in column A, and from column B till column E, there are 4 variables (Foreign LT Debt, Local LT Debt,Foeign ST Debt and Local ST Debt). Their respective month end values are already given from column G till Column R. How it is going to be extracted is that against each effective date for that variable (Foreign LT debt, for example), the Rating is given under Rating header. So, for instance, for Foreign LT debt, rating from 25/8/1993 till 4/2/1997 is BB-. So, for all CELLS in column B between these dates, the rating should be BB-. Before that, since there is no value given, I want to put it NA. I have filled the values in column B for demonstration. I want to write a function or perhaps a macro to do that automatically for these 4 variables. There are 50 + sheets with the same layout, so I hope the macro or look up function have not to be written 50+ times.
View 1 Replies View RelatedI have a table as below, and I would like to keep only the latest date for each EMP_NO. For example:
001VICE PRESIDENT A062004-01-01
031SENIOR VICE PRESIDENTA042004-01-01
...
....
....
=======================================
[EMP_NO JOB_TITLE DEPTCHANGE_DATE
014 ASSISTANT VICE PRESIDENT A01 2004-01-01
001 MANAGER A062000-03-01
001 MANAGER A062001-06-01
001 VICE PRESIDENT A062004-01-01
076 VICE PRESIDENT A022003-04-23
013 DIRECTOR OF MARKETING A01 2000-06-19
031 FIRST VICE PRESIDENT A042002-01-01
031 FIRST VICE PRESIDENT A042003-01-01
031 SENIOR VICE PRESIDENT A042004-01-01
=======================================
How can I use a pivot table or advanced filter or macros to view rows by
Only today’s date (1 row) ?Only this week ?Only last week ?Only last month ?Only last 12 months ?All dates ? That is, rows are headed by day. I select the rows that I view.
I have a checkbook register set up in Excel, and I really like it. I thought it would be good to set up a pivot table to organize all of the entries into an expense report. I have done this for over a year now, and I love everything about it, but here is the problem:
Now that I am getting so many entries, I thought it would be a good feature to limit the pivot table to a date range. I created 2 entry cells at the top of the pivot table to put a start and end date. I would like the pivot table to compare the entries in the register to the dates, and only include the entries between those dates. How do I do this?
I have several time series in excel pulled from a datasource on a daily basis, however some series include weekends, some dont and some others have a few days missing. What I did is I already have a column set up with only weekdays on the other sheet, what I am trying to do is match the data with the dates.
The obvious choice is vlookup, but given that I have over 50 time series and the time span is over 10 yrs, its not the optimal solution...it will crash the sheet i think. I also tried a combo of match and index...but same...too many formulas. I think I need a macro. Does anyone who analyzes time series have a "cleaning" code that he oe she can share with me?
Having used DSUM successfully quite frequently, but am now trying to extract and sum data based on two date ranges as well as a third variable. However, I'm having no success in getting this to work despite reading numerous threads and downloading/reviewing Dave's DFunctions With Validation example to make sure I wasn't missing something. (In the example file the DSUM formula to calculate "Full Cost" using date ranges also DOES NOT sum). look at the attached file. A pivot table is a possible option, but I'm unsure (still reading/researching) how to filter the table to sum only data within desired date ranges (like you can with DSUM).
View 4 Replies View RelatedI"m attempting to generate a report to show the number of occurrences for a particular product within a calendar month.
Data is stored on the first sheet, output is populated on a separate sheet. Seems simple enough, but getting the "month" out of the date, whilst referring to another sheet seems to be the sticking point.
2014/03/24 14:34:17
Product1
2014/03/24 13:45:51
Product2
[Code]....
i got 2 sets of data, but the dates are not correlated
For e.g.
3/18/199610 3/18/199613.5
3/19/199610.1253/19/199614
3/20/199610.1253/22/199614
3/21/199610.25 3/25/199614.0625
3/22/199610.25 3/26/199613.25
3/25/199610.25 3/27/199613.1875
3/27/199610.25 3/28/199613.125
3/28/199610.25 3/29/199613.5
3/29/199610.25 4/2/199613.625
4/1/199610.3754/4/199613.8125
as u can see the dates jump here and there
is there anyway that i can sort it out so that the dates would correlate to each other on the same rows?
if its possible, i have like 16 sets of data to correlate, how do i do it?
I need to convert numeric data to proper dates. Example: a cell currently reads 100875 but I need it to display 10/08/1975.
I've already found a VBA script that properly formats new data as you enter it (keying 1298 results in 1/2/1998), and I'm familiar with using =DATE(left,mid,right) to coerce Excel into spitting out a date in a certain format.
The difficulty I'm having is that I need to make existing data display correctly, without adding another column to accommodate reinterpretation of said existing data through a formula. Essentially I'm looking to avoid having to re-key several thousand date entries.
I am having trouble with the following macro,
[Code] .....
When I press F8 and step through the macro, the StartDate and EndDate both seem to populate correctly.
The macro seems to go through the motions but returns NO results, unlike the recorded macro.
Macro code to "Clear Filter".
I am finally at the end of this project. I need to find a code that will copy any lines that the person has turned 65 in the previous month or that will turn 65 in the current month to the Monthly tab.
Sample Macro jscalem.xlsx
At the moment all our work is logged by codes eg. A1Misc, B5Change, N9Important. As well as the codes, we enter the date in the column next to the code along with another Column to show the amount.
I need a Macro to look at the date column and only take dates which have Sept then go to the column next to it and pick up the codes individually and sum up all the amounts for the codes.
I have attached an example which shows from A13 downwards what I need the macro to show when finished.