How can I use a pivot table or advanced filter or macros to view rows by
Only today’s date (1 row) ?Only this week ?Only last week ?Only last month ?Only last 12 months ?All dates ? That is, rows are headed by day. I select the rows that I view.
I have a 'dump' of a general ledger accounting system....about 20,000 rows. Column A contains the journal number for each set of transactions (there are usually two rows in each set but sometimes three), column C contains the name of the account, and column E the amount. For example:
Row 269 cell A269 = 487 (journal number) cell C269 = Cheque, cell E269 = $50
Row 270 cell A270 = 487 (journal number) cell C270 = Travel, cell E270 = -$50
What I am wanting to do is to extract the sets of journal entries, where the account name (in column C) is "Cheque"....so I would want to extract rows 269 and 270 based on the above example. If I filter using the account name it only gives me one row for each journal transaction - only half of the story. Given that the journal number links the two rows.
I have a spreadsheet of raw data that has been downloaded in Excel. In Column N there are different site numbers.
I want to use a new Sheet for each site. Using a formulae I want to filter the data for each site and then copy the entire row to the relevant site`s page.
So I should end up with a sheet for each page and allthe data sorted correctly?
If I give excel the advanced filter criteria <=2/15/2008 it seems to list all the dates prior to and on that date. Are there any pitfalls to this filtering technique (i.e. would any dates fall through the cracks)?
View 2 Replies View RelatedI have a three columns of data in A,B,& C.
In column A a From Date
In column B a To Date
In column C a 6 digit number
I would like some code to achieve the following in this order:
1) Find any duplicates of the 6 digit number in column C and then place them on the same row as the first.
I.E if the following three matches are somewhere in columns A, B and C:
A B C
08/07/2007 22/12/2007 731655
22/12/2007 29/12/2007 731655
29/12/2007 05/07/2008 731655
I want them to place on the same line in date order like:
08/07/2007 22/12/2007 731655 22/12/200729/12/2007 731655 29/12/2007 05/07/2008 731655 (this line would be on the line above)
2)After all the above has been done I would like the code to go through and looking for matches of dates between column B and A
For example if I had the below two dates somewhere in the list:
A B C
08/07/2007 04/08/2007 729955
04/08/2007 01/09/2007 729293
I would want the bottom one to be moved to the same line as the top like:
A B C D E F
08/07/2007 04/08/2007 729955 04/08/2007 01/09/2007 729293
If there are more than one match like below:
A B C
08/07/2007 04/08/2007 729955
04/08/2007 01/09/2007 729293
04/08/2007 01/10/2007 729273
I would like the following:
A B C D E F
08/07/2007 04/08/2007 729955 04/08/2007 01/09/2007 729293
04/08/2007 01/10/2007 729273
3) AFter this was completed I would like to look for date matches one day apart for example:
A B C
08/07/2007 04/08/2007 759955
05/08/2007 01/09/2007 759293
And then place the bottom set of date along side the top like:
A B C D E F
08/07/2007 04/08/2007 759955 05/08/2007 01/09/2007 759293
I have a simple excel sheet and two of the columns show a Due Date and a Received Date. All I want to do is highlight any cell in the Received Date column where the Received Date is greater than the Due Date. The spreadsheet shows Purchase Orders and shows when they were due to be received and when they actually were received. i'd like to be able to show all orders that were received past their due date.
[Code] ....
In column F I have a list of dates (dd/mm/yyyy).
I can manually filter dates ok, but want to set it to part of code to use automation for a report.
The code when run, finds nothing, where it should. I tried using [CDate] also but also same result.
I'm trying to filter a list between two dates that are selected using drop down lists in Cells CZ1 and CZ2.
The first part of the code works ok ie it filters the list by column 28 as "Shipped" only.
The second part is causing me trouble.
The third part sorts the list by date order based on column 48 and this also works ok.
Code:
Sub FilterTransactionDates()
With Sheet1
.AutoFilterMode = False
.Range("A1:CU1").AutoFilter
.Range("A1:CU1").AutoFilter Field:=28, Criteria1:="Shipped"
.Range("A1:CU1").AutoFilter Field:=48, Criteria1:>=Range("CZ1").Value, Operator:= _
xlAnd, Criteria2:
I am using Excel 2010, and trying to count the number of times a certain name occurs within a specified date period. The date range start date is manually entered in F7, and the date range end date is manually entered in F8. I need to be able to choose different reporting periods. The answer to this question goes into F3.
I also want to know how many working days (Column D) it takes per name. A working day is Monday-Friday, less public holidays. In this period there have been public holidays from 24 December until 2 January (inclusive), 20 January, 6 February, 18 April, 21 April, and 25 April. I put these dates manually into the worksheet "Holidays".
For the number of times a certain name occurs I tried the COUNTIFS function but keep getting a "zero" value. I used the NETWORKINGDAYS function for the working days and have incorporated the holiday periods. That seems to work OK and I can live with the negative date values showing here.
The really tricky part for me - can I combine the COUNTIFS (assuming it works) and NETWORKINGDAYS functions into a single function to only count the working days of a specific name. As some names have yet to be completed (i.e. there is no data in Column C) how do I not count those? The answer to this question goes into F4.
There will be about 6 of these spreadsheets, and I intend to link all worksheet data into a "master" spreadsheet which automatically updates whenever it is opened. The separate spreadsheets are stored in a document management system rather than a network drive so I can't state a filepath.
I have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23
Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
Attachment 301726
I have a very long excell sheet and I want to be able to have two buttons off to the side that allows me to filter and unfilter my page. What I want to accomplish is if the cell in column "A" is not populated then I do not want to see that entire row when I filter.
View 4 Replies View Relatedi have a table with game results like: ...
View 9 Replies View RelatedI have a module that imports data from a text file (120000 rows), filters and removes some unneeded (85000)rows and then puts the data in a designated workbook.
Problem: when filtering by some criteria it for some reason removes a row off the final file for each criteria. I have a total of 23 filtering criteria. I have attached a file for exemplification. You can run the module and import the file, it will be without first 23 rows, even if non of the deleted rows contained the filter criteria.
example.txt
I have a macro that filters a column with varying criteria.
Row 1 has all my column headings.
What I would like to do is copy the 5 rows in view below Row 1 after the filter is applied.
I've got a row of data with a column showing some sales including amounts with 0. Any row with 0 I want gone, so I want the macro to filter the list, delete all the rows with 0 in that column, and then display what's left, all the rows with some number other than 0 in that column.
The code below should filter the 0 rows, delete those rows, and then display what's left. I don't want the heading row deleted, but everything below it that is filtered. What my code below is doing now is not deleting everything it should. How can I fix it.
Sub prepmetrics()
'
' prepmetrics Macro
' for use with monthly report - don't forget the new coversheet
'
Application.ScreenUpdating = False
Range("A7").Select
Selection.AutoFilter
Selection.AutoFilter Field:=14, Criteria1:="0"
' this is the challenge here. How do I tell Excel to select, relatively, whatever
' rows are now showing as a result of the filter?
Range(Selection, Selection.End(xlDown)).Select
Selection.Delete Shift:=xlUp
ActiveSheet.ShowAllData
' there may be a number of different criteria in different columns, so
' we rinse and repeat as many times as necessary but, again, each filter/delete
' task should delete all rows filtered
Selection.AutoFilter Field:=16, Criteria1:=">7500"
Selection.Delete Shift:=xlUp
ActiveSheet.ShowAllData
Application.ScreenUpdating = True
End Sub
I have been trying to transpose a piece of code that was put on this forum back in 2005 into my own Workbook but have been unsuccessful. The original piece of code filtered a column for unique entries and then filtered the main sheet for each unique entry and cut and paste each row that the unique value occurred in and in a new worksheet. A new worksheet would be created for each unique filter.
So what I am trying to do is look up a list of values that i have in a list on the worksheet. Then for each entry in my list, create a new page and cut and pasted the filtered main worksheet into that page.
Finally return to the main worksheet and then remove all filters.
I have attached the original file that was submitted so you can look at how it works and I have posted a sample my worksheet (with some things disabled to reduce file size but hopefully you will get the layout. However I don't currently have that sample on this computer. It is posted on another thread under the title "Selecting rows with specific values in a column".
I have filtered a worksheet and want to only total the data in the columns that are visable, is this possible?
View 4 Replies View RelatedI have a VBA code that captures auto-filtering based on two criteria, but the problem is, the spreadsheet I am working on changes the amount of rows daily (ie: more rows are added onto it).
How can I change my code such that it doesn't fix the filtering area to a certain date's row #'s?
The code is
Rows("6:6").Select
Selection.AutoFilter
ActiveSheet.Range("$A$6:$Q$108").AutoFilter Field:=11, Criteria1:=
"2017708007"
ActiveSheet.Range("$A$6:$Q$108").AutoFilter Field:=5, Criteria1:= _
xlFilterYesterday, Operator:=xlFilterDynamic
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
BDD LIMITED
3 Telford Place
L*****r QLD 4315
Phone: 07 5777 3622
I have a two sheet, in Sheet1 i have a data, and in sheet 2 i have a count of location wise data in it, which is from sheet1.. And beside it u will see a button "View Detail". When you click on that button it will pop up a userform which have listbox and 2 button.. Now in listbox i get a filtered value of column C of sheet1 (For eg. Mumbai, Pune, Chennai).. When i click on the value (Mumbai) in Listbox and then click on View Location Details. It should give me a details of mumbai based candidate, like name, pod no, location in the range of (H5:J100) of sheet2..
I wrote the code for it but its not giving me the correct data..
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
I hav a 2 columns. Column A contains data for 2 engineers, "paul" and "john".
Column B contains the hours they work each day for a month.
i would like to filter "johns" results and find out how many hours he works in total. i do not wish to use the autofilter, is there an easier or quicker way of filtering it???
john 11:03:08paul12:04:09john 15:11:44paul18:09:00john 05:34:24
Found the below code that Dims r as 1. This would work fine if my data began from A1. I want to apply the search and filter from A18 onwards. On attempting to change R to 18 it worked with the exception it did not filter the last 16 lines (They should not have appeared).
[code]Sub Show_Only_Name_AinU_Balance()Dim r As Long 'rows to checkDim Hiders As Range, Found As RangeDim Cond As String''The Name you want displayed is from cell E5Cond = Worksheets("CLSSI Home").Range("E5").Value'Sheets("AinU Balance").SelectApplication.ScreenUpdating = FalseCall Show_All 'Unhide previous names if anyFor r = 1 To ActiveSheet.UsedRange.Rows.CountSet Found [code]....
How to highlight, filter, or otherwise in someway mark all records on a spreadsheet that do not appear on another spreadsheet?
On Worksheet1, I have columns of data for First, Middle, Last, Clock Number, Address 1, Address 2, City, State, Zip Code and Employment Status. On Worksheets 1 and 2, the data and columns are 100% identical, except Worksheet1 has names I want excluded from a database import process I'll be running on the 2nd worksheet.
Is there an easy way or a quick VBA script that would allow me to highlight or filter out of Worksheet1 any rows that are not in 2?
how to filtering data from the columns please (not the rows)..?
Usually we could filtering the rows with auto filter, right..?
Now, is it possible to do that with columns..?
I am working in a worksheet with 15k rows of data. I have sorted and added subtotals. Is there a way to remove data based on number of occurrences? Example, if the same account number is listed less than times in the worksheet, i would like to eliminate the account number from the data. How can i achieve this?
View 1 Replies View RelatedThe sheet is pretty simple - I am trying to track the division of a personal estate.
First page has columns for item number, then item, drop down menus for location in house, value and "picked by". So 5 total.
Second page is a "summary of division" listing number of items, median cost of items and complete value. Below is a breakdown of the total value of items that each individual selected.
While the majority of items have yet to to priced - the price range is there - so the format (whatever is it) should work.
I have a table with numbers in a column and various other data. I use this data to track over 30 and want to filter everything thats over 60. Currently I use compound COUNTIF to check 2 criteria using :
=COUNTIF('1SBCT'!F:F,"No*")+COUNTIF('1SBCT'!H2:H3,"")
But would like to an additional criteria in that it will count everything over 60 after with counts the 2 conditions above.
Example: counts how many have a No* or blanks and once those are sorted checks for over 60.
I had column A and
a1 = 1/2/1990
a2= 2/5/2000
a3 =4/3/1999
a4 = #N/A(From vlookups)
a5 = 6/4/2013 and
a4 = #N/A(From vlookups)
How would i filter out just the #n/a's
Something like:
If this workbook.sheets("sheet1").cells(t,1) = #n/a then
run code
Not sure because it's a error not actually #n/a right?
when i used autofilter example there is 3 criteria on it A, B, C and when i choose A one of the lowest column still showing B or C criteria.
View 2 Replies View Related