I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Sheet1
A
B
1
Ranges
[Code] ......
Excel 2003
I'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!
I am using Excel 2007.
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get the minor files (68 seperate files) to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make matters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
I am using Excel 2003 and I need to count occurrences involving two colums like this: on sheet "SALES", column I has values ranging from 8.00 to 10.00; column M has positive and negative values.
formula to count how many numbers in column I exist between 8.00 and 8.99 associated to a positive value in column M? And likewise for negatives?
I have a column of values (E4:E87). I'm adding 1 value to this column manually each day...so tomorrow (July 24th) I will have E4:E88...and so forth. Each day is a new row.
In column Z (i.e. cell Z87) I have the formula =(SUM(O53:O87))/(SUM(E53:E87)). Z88 will have
=(SUM(somevalue:O88))/(SUM(somevalue:E88)). This gives me a resulting percentage for a rolling period of time.
I need an automated way to populate "O53" and "E53" ("somevalue") in the formula so that the SUM of the current row's cell (i.e. E88) through [whatever] is 50 or greater. (The sum of the values should be as small as possible, but at least 50, and should not include any older values than absolutely necessary for it to equal at least 50.)
An image of my spreadsheet can be viewed here: [URL]
My question, and it's my first one here, is regarding the use of ListViews in Excel forms. I need to populate it with a range of several columns with data from a spreadsheet.
View 4 Replies View RelatedI have this macro that does an autofill in Column A depending on what is in Column B, however the rows are going to increment frequently. Column B has repeating numbers but they are not all even amounts. So column B can 1,1,1,1,2,2,2,2,2,3,3,4,4,4,4,4,4,4,4,5,5, and so on all the way down. The code will identify when the value changes to something new and in Column A will start numbering from 1 to whatever until it recognizes that a value changes in Column B.
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Columns("C:C").Select
Selection.Cut
Columns("A:A").Select
ActiveSheet.Paste
Columns("C:C").Select
Selection.Delete Shift:=xlToLeft
Columns("A:A").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("A1").Select..............................
The problem that I have is in bold with the range. I need it to continue until it recognizes the last cell in the column that has a value and stop.
Right now it will work but only until row A6391 for my first sheet however these rows will increase over time. I'm using Office 2007.
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies View RelatedI'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
How to use countif in Excel 2003, for multiple range and criteria ? Can 'Nested ifs' be used? If so, a sample of such ifs
View 3 Replies View RelatedI have this code working fine in excel 2007 but I need to get it working in excel 2003.
=0.02*(_xlfn.SUMIFS($D$2:$D$98,$C$2:$C$98,">="&I5,$C$2:$C$98,"<="&I4))
I have attached a test document to show what I'd like to do. It is basically adding values if the column next to it is in a certain range.
counting columns in Excel 2003.xls
I have a combobox in a excell sheet. It is possible to pass a parameter in the input range instead of Parm!$B$1:$B$10
View 2 Replies View RelatedI some code that reduces a long list of dates from one source of data (in its own worksheet) down to a unique list of dates (on another worksheet). I need to create a new worksheet for each date in the range (named for the date), and then allocate each line item for that date in the source data into its repsective worksheet.
I'm using Excel 2003.
How do I create a Named Range that is dynamic (I think using the OFFSET function) that automatically expands and contracts as the rows and columns of my data changes?
Next step, I then want to use that Named Range as the source of the data for a PivotTable.
Yes, I know starting in Excel 2007 you can use Tables and don't need to create a dynamic named range. That is not an option at this time.
I am trying to perform a count against two ranges of data.Both ranges contain contain values (dates in my case).I am trying to perform a count where cells in column A have data but cells in column B do not.
Is there a way this can be done in Excel 2003? I have tried numerous COUNT and SUMPRODUCT queries but have not found a way to get this to work.
Objective: I have a financial spreadsheet, which i want to bring to my front sheet the sum of data in between 2 week ranges. For example, if I select week 26 and 52 then all the relevant data will be summed into the relevant cell on my front sheet.
Current Technique: I have on my "data" spreadsheet my columns in B1 down listing Week 1-52 and then the cell headings in B2 onwards. I have created a summary table which currently shows the 4 quarters of the year (1-13, etc) and I am using helper columns to pull this data onto my "front sheet", depending what selection is made on the drop down e.g. 1-13, then all summary data will be dragged onto my front sheet.
On the front sheet, in each cell I need information to be displayed I use the following formula;
"=IF(ISERROR(INDEX(Data!$C$56:$BF$60,Data!$BI56,COLUMNS('Front Sheet'!I13:J13)))"
As you can see the quarter data is useful, but a more flexible date range would be more useful to sum data between any selected week.
I am looking for some example code that when I get an error using workbook.open, because a file is corrupt, I can cut from the list and paste into a range to show that file had errors, then delete that row and continue.
For example
My list:
Column A Column B Errors List Error
File path B and name Information File Path A Information
File path C and name Information
File path D and name Information
I can cut and paste File path C into an errors list, then delete the row A and B and shift the below lines up.
I have a worksheet which has various figures for each day of the week however I need to establish the weekly average of these figures.
Due to the way in which the figures are displayed, I am unsure how to use a formula which does not require a range with cells located adjacent to one another.
I have attached a test sheet as an example. The cells in yellow require the formula and I need a weekly average for criteria 1-3. This formula also needs to be compatible in Excel 2003
Test Sheet.xls
Having a hard time putting this one together..Trying to do: Create a formula that counts how many cells in Column L, that fall within a date range and also have a specific category of "text" (Column E). What I've tried:=COUNTIF($L$4:$L$166,"
View 5 Replies View RelatedI'm trying to use VBA to populate excel range data to MS Word bookmark.
I am using Excel 2007 have following field
Column A Column B
Cash xxxxx
Liabilities xxxxx
RE xxxx
What I wanted to do it to populate data at Column B of Excel to MS Word Template below
Cash xxxxxx
Liabilities xxxxxx
RE xxxxx
I've tried using below code sample code but it does not work.
Sub testing()
On Error GoTo errorHandler
Dim wd As Word.Application
[Code]....
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI am running Excel 2003 on a Win7 system.
Here is my situation:
Each of my data sets spans roughly 75 columns by 250 rows at present, but this could expand. The first 7 rows contain metadata. Columns 2-25 or so contain the raw data, from which everything to the right is calculated. The data sets have most columns in common, but not necessarily all.
In order to tease out the most meaningful information from my data, I frequently sort all or part of it based on varying criteria. When I find a useful sorting criterion, I create a new column with a header that describes the criterion and populate it with a formula that returns a 1 if the condition of interest is met for that row, or a 0 if it is not. For example, if I am doing this in column AA, I might enter
=--(AND($AX8>$AA$4,$Y8>0))
and copy it down to the end of the data. The resulting vector of 1s and 0s quickly re-identify data that meets that criterion even after subsequent resorting. It also makes locating data that meets multiple sorting criteria extremely simple. Essentially, I create a truth table.
Cell $AA$4 in the above example contains a "comparator" value I might wish to change at some point, which would change the subset of data the condition selects for.
Here's the first hard part:
For each data set, I need the ability to generate meaningful plots that includes separate series based on the criteria I have described. However, I also need to retain the ability to resort the data or change the comparator value without disrupting these plots. In other words, the plots must NOT change when the order of the data is changed, but MUST change to display the appropriate data when the comparator changes.
Here's the 2nd hard part:
Once I have this working for one data set, I need to be able to port it to other data sets (which are contained in other workbooks), so that I can compare equivalent plots from each. I also need to minimize the number of manual steps involved in doing so, to avoid human errors and excessive time consumption.
The only other possible complication I can think of at the moment is that, to this point, I have been inserting blank rows to isolate subsets that I do not wish to perform further sorting on from each other.
Right now I am angling toward VBA code that loops through the entire data set to generate base dynamic ranges using the column header row (row 1) as the names, and the entire column of data for the rangeloops through the truth table columns to generate "branch" row ranges for each of the sorting conditions,loops through the entire data set one more time to create "branch" ranges for each of the base ranges.
I could generate some code to accomplish a one-off solution for a given configuration of a single data set (provided there is not a list length limit in a chart series that I'd be violating)...but without a dynamic named range, I don't know how to get to something that would update appropriately. So in essence, I am still stuck at the dynamic range part of this.
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
View 4 Replies View RelatedI have a log that is used to keep when items are due. I do not want my coworkers to delete items once they have been entered and saved. So the excel sheet I am trying to make has certain cells in a range that I want to autolock after saving. For example: the cell range is G3:J402. I enter Customer Name in Cell G3 and the Date the job was received in H3. Once i enter that information I want it locked once i save it. Then later on, my coworker completes the job and enters the date in I2. And again once she saves this she shouldn't be able to edit this information. Then again another day she comes and enters the date on I3 when the product has been shipped out.
While all of the above activity is going on, new customers are continuously being in added in G4, G5....
Also, if possible the date in the H range should be the date items are entered in G (this would be a nice added feature). I've included the file for review. I'm running Microsoft Excel 2010
[URL]
I am using office 2007 and here is the problem I am facing. I am using a formula and it is based on two columns data. The formula result is at C20:C2400, while the two data columns are at A20:A2400 and B20:B2400. I add one more row of data at A2401 and B2401, I expect the formula result would auto extend to C2401 but it doesn't, nothing happen.
I check that I need to turn on the auto extend check box in option, I check and it is already on.
I have a log that is used to keep when items are due. I do not want my coworkers to delete items once they have been entered and saved. So the excel sheet I am trying to make has certain cells in a range that I want to autolock after saving. For example: the cell range is G3:J402. I enter Customer Name in Cell G3 and the Date the job was received in H3. Once i enter that information I want it locked once i save it. Then later on, my coworker completes the job and enters the date in I2. And again once she saves this she shouldn't be able to edit this information. Then again another day she comes and enters the date on I3 when the product has been shipped out.
While all of the above activity is going on, new customers are continuously being in added in G4, G5....
Also, if possible the date in the H range should be the date items are entered in G (this would be a nice added feature). I've included the file for review. I'm running Microsoft Excel 2010.
I have tried hard to find other solutions with links at the following places but not exactly what I'm desiring:Auto lock cells after data entry when file saved...
Auto lock cells after data entered and SAVED.
Auto Lock Selected Range of Cells After Saving
I should also mention that most solutions either provide for locking/unlocking of all cells but not a selected range. Or they provide for locking/unlocking of a selected range but not for a specific sheet or not after you have saved the workbook.
This is unique in that I'd like it to autolock after i press the save button for a SPECIFIC number of cells. I just wanted to clarify as to not make others think that I haven't used the search function.
In sheet 1, I have a list of data in A2:D21. In sheet 2, I have formulas in the same range that "paste link" the data. If, there is no data entered in any entire row of the same range in sheet 1, then I want the entire row to hide automatically in sheet 2. In fact, unless there is something entered to start with, I do not want any of the rows to be visible. Is this possible and how?
View 2 Replies View RelatedI've got a spread sheet at work that is shared between 4 people. It's password protected and its been protected so only four of us can edit it. It was working fine until yesterday for no reason the auto filter stopped working. The drop down arrows are still there but nothing happens when you click on them?
The sheet was made on excel 2003 but one of the users uses the newer excel which we will all eventually get.