Sum Values From Specific Date
Jan 25, 2010I tried this (attached File) formula but can't make it work. Formula in F17
View 2 RepliesI tried this (attached File) formula but can't make it work. Formula in F17
View 2 RepliesAll is inside this file: [URL] ..........
View 9 Replies View RelatedI have a table of dates and values and would very much like to know a formula for returning the min and mean values for each column within a specified time (date) period.
Table is as follows
Date value(a) Value (b) ....
1/1/09 10 8
2/1/09 8 6
3/1/09 5 2
I am in desperate need of a function that will count a column of data where there are blanks and values based on a certain date that will also capture any data that is added after refreshing the table from Access. I have tried several functions but this is what I have: =(ROWS('TouchBack Detail'!$Q:$Q)*COLUMNS('TouchBack Detail'!$Q:$Q))+(COUNTIFS('TouchBack Detail'!$B:$B,'Nov TouchBack Summary'!B$1)). The result should be 3 but it’s including all other cells in the column that are not and should not be included in the refreshed table’s data (Table_TouchBack.accdb). I have attached the spreadsheet for review. The function is in cell B27 highlighted in yellow.
View 3 Replies View RelatedIn my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
So, this works perfectly by itself: {= SUM(IF(MONTH(I4:I17)=1,G4:G17,0))}
And this works perfectly by itself: {=SUM(IF(YEAR(I4:I17)=2007,G4:G17,0))}
But this doesn't work at all: {=SUM(IF(AND(MONTH(I4:I17)=1,YEAR(I4:I17)=2007),G4:G17,0))}
SUM by both a specific month, and a specific year from a single date field?
I am trying to create a calculator which will show start date and end date based on the specific date provided.
EX: column A has January 1, 2013, column B has Wednesday, Column C should have a start date which supposed to be 4 days ago (December 28).
Let's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment
B1 contains ending date of employment
C1 contains specified beginning date (criteria)
D1 contains specified ending date (criteria)
I'm trying to match certain transactions between two bank accounts, where the only like values are going to be date and disbursement/deposit amount. Obviously vlookup will not work here because there are many duplicate values. In the attachment I put in a Vlookup in the Account 2 tab to try and demonstrate what I'm trying to do exactly, which is match deposits in Account 2 with Disbursements in Account 1.
After looking around I found that maybe a combination of INDEX/MATCH would work here but how to get it to work or even if it is appropriate in this situation.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I am working on a spreadsheet to create a school 'tracking' system based on excel. What I need is that as soon as a box in column B is ticked, a date (TODAY() is entered in column A. That is not so difficult, and I have used the formula in cells in column A:
=IF(ISBLANK(Bx);"";TODAY()), where x is the specific row.
So, keep cell A clear untill something is written in cell B. This works fine.
But, for the purpose I need to keep the TODAY() date fixed after entry. And it need to be erased again if the tickbox in cell B is emptied again. It need then to re-enter a new date after cell B is re-used.
I have a column with dates populated(examp.Fri, 15 Feb 08)in it. In the next column I need to return the month and year (month,year format) this specific date falls in?
View 9 Replies View RelatedI have an array that I'm using - and it works perfectly: =SUM(If((FREQUENCY(If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""),If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""))>0),1))
Now, what I would like to do, is see how many of these unique numbers relate to another number in column D
See attachment.
I want to calculate the end date of my German courses. This is how it works:
A course consists of 60 LU*. The course can occur i. e. three times a week: Monday, Wednesday and Friday. In each day the course lasts 2 LU, which means 6 LU each week. There is no course on Tuesday, Thursday, Saturday, Sunday and on holidays. Therefore this type of course that begins on 18-Nov-2013 will end on 03-Feb-2014.
Another course which occurs Tuesday, Thursday and Saturday, and respectively has 2 LU on Tuesday, 2 LU on Thursday and 3 LU on Saturday and starts on 03-Dec-2013 will end on 06-Feb-2014.
Therefore I want to create a worksheet where I set the start date, choose the days and respectively the LU amount on those days. The end date shall be calculated according to these criteria.
The workday function on excel cannot do this and I do not have any programming skills to work with VBA.
Legend:
*LU = lesson units; 1 LU is 45 minutes
Holidays:
28-Nov-13
29-Nov-13
08-Dec-13
09-Dec-13
25-Dec-13
31-Dec-13
01-Jan-14
[Code] ...........
Given the following data located in Sheet1 of a Workbook -
•I have seven columns (assume header row names are “A, B, C, D, E, F, G”) each containing numeric data in random order.
•All columns are of the same length (equal number of rows), followed by a blank cell, but the number of rows is unknown.
•Columns with header row names A-E will only contain numbers from 0 to 100, while F and G may contain numbers from -127 to +128.
Here is what I would like to do –
I would like to be able to analyze the data in columns A-D to locate rows that contain specific combinations of values (ex. row 41 contains the values 50, 0, 0, 0 and row 239 contains values 100, 0, 0, 0 in columns A – D, respectively, etc.).
For each row that is found to contain one of these combinations (there are many different combinations required), I would like to copy the associated values from columns E, F, & G for that row, and paste them into their respective (E, F, & G) columns located on Sheet2 of the same workbook. However, I would like to paste the E, F, & G values into a specific row order on Sheet2, DETERMINED by the value of the A – D combination identified on Sheet1.
Continuing with the ex. above, let’s say I would like to have the EFG values from row 239 in Sheet1 copied to row 10 in Sheet2, while the EFG values from row 41, Sheet1, are to be copied to row 11 in Sheet2.
In effect, I would like to create a table of this subset of data, in a specific order, from which I could work later.
I can do this manually using “ AutoFilter” to locate the data I need and then write formulas to copy the data from Sheet1 to Sheet2 in the order that I need, but every time the order of the original data on Sheet1 changes I have to start all over.
I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
I am trying to have cells display red for information that was typed after a certain date. I know that is easy except that I don't wan't the information that already exhists in the cells to be formatted differently, only changes after the date.
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
i want to sum the values less than 1y, 2y, 3y and so on. I define 1y to be values less than 18-Mar-09, 2y to be less than 16-Jun-10 but greater than 18-mar-09, 3y to be the 3y value, 4y the 4y value and so on.
1D 09-Jan-0879
1W 15-Jan-08172
1M 08-Feb-08-288
2M 10-Mar-086,835
75D 19-Mar-082,945
H8 18-Jun-084,050
M8 17-Sep-081,160
U8 17-Dec-08-1,557
Z8 18-Mar-09-6,189
H9 17-Jun-09-5,868
M9 16-Sep-09-5,241
U9 16-Dec-09-3,655
Z9 17-Mar-10-3,525
H0 16-Jun-10-2,132
3Y 10-Jan-11-37,902
4Y 09-Jan-12-26,380
Is there a way to sum data up to a specific date?
I have a large data table, which includes various values throughout the year, if i want to look at the total value up until say 31/01/2014, but my data goes up to 28/02/2014, is there way to do this within the sumifs function?
A1=10 July 2007
A2=12 (number of days)
A3=21 July 2007
I need a formula in A3 that will basically add the number of days in A2 to the given date in A1.
Note: Don't know how would this work with 30 and/or 31 days months??
I have run into another block wall.
Here's my problem:
I need to know if there is a formula that will allow me to not only calculate a date from two different cells -- but also to round the answer to THE NEXT 15TH OF THE MONTH beyond that date.
Ex: Cell F5 has a purchase date. (1/1/10)
Cell F25 indicates a specific number of months. (3)
Cell F5 calculates the totals of F5 plus the # of mos. in F25. (4/1/10)
But what I need to do - is to have Cell F5 show 4/15/10. (or, if Cell F5 were to come out to be 4/16/10 due to different figures in F5 and F25 -- it would need to indicate 5/15/10, and so on.)
Donwloaded a yearly calendar from the Vortex website. Wanted to know if you can have a list of dates highlighted on this calendar.
I have tried the countif function as well as various code from this forum but to no avail.
in the attached excel file, in cell D21, i have tried to join my SumIF/CountIF formula together with my 2 date range vlookups.
the first vlookup is for the start of november and the 2nd vlookup is for the end of november.
in essence, i want to the average price of all 6160 printers sold in November 07 period.
i cant get the formula working, so any help would be much appreciated by me.
I have list of many addresses. Then I have different dates related to addresses witch I insert myself regarding colaboration with specific person on that address. Each week I have to make list of all addresses that have the same date. Since manualy this is quite hard to do, I was wondering if I could do it automaticly.
I am attaching sample of what I am talking about. exporting addresses template.xlsx
Every week I have a set of open tickets with various dates. I need to break these Dates down to certain ranges.
Current DateAged Date Range Value to assign
10/20/2013 10/18/13< = 3 days A1
10/20/2013 10/7/13> 3 days & < 2 weeksA2
10/20/2013 9/23/132 weeks - 4 weeksA3
10/20/2013 9/22/13> 4weeks A4
I need in cell H:2 a value returned of with A1 thru A4 based on the results of the information in Columns A:D.
So basically it shoudl have in column H a bunch that fall in the reange of 3 day or less with "A1" then the dates that fall in the range of greater then 3 days but less then 2 weeks a value of "A2", etc. I hope i made this clear enuf to understand.
If a cell has a date in it (date payment received) I would like to replace it with the value of the payment received that is given in a different cell - how do I do it ?
View 2 Replies View RelatedIf A1 is 81209, how can I use functions in B1 to convert it into DEC/09/2008?
View 4 Replies View RelatedIs there any way to format the date to DD/MM/YY, and user should be restricted in entering any other formats other than DDMMYY
View 3 Replies View RelatedI'm using the code below to extract information from a 'Source' (Remaining Allocation Data) to a 'Destination' (All CTO Expired Assignments) sheet.
[Code] ......
The code works except for this part of the script
[Code] ....
What I'm trying to do is as follows:
Extract records where the FinDate is less than the CurrentDate, (i.e. 19/06/2014) and,
Is equal to and no greater than 28 days prior to the Current Date (i.e 22/05/14)
I've tried all sorts of formulas to try and get this to work including the 'DateAdd' function, but I've so far been unsuccessful.