Sum The Values Are Less Than To Specific Value
Jan 12, 2008
i want to sum the values less than 1y, 2y, 3y and so on. I define 1y to be values less than 18-Mar-09, 2y to be less than 16-Jun-10 but greater than 18-mar-09, 3y to be the 3y value, 4y the 4y value and so on.
1D 09-Jan-0879
1W 15-Jan-08172
1M 08-Feb-08-288
2M 10-Mar-086,835
75D 19-Mar-082,945
H8 18-Jun-084,050
M8 17-Sep-081,160
U8 17-Dec-08-1,557
Z8 18-Mar-09-6,189
H9 17-Jun-09-5,868
M9 16-Sep-09-5,241
U9 16-Dec-09-3,655
Z9 17-Mar-10-3,525
H0 16-Jun-10-2,132
3Y 10-Jan-11-37,902
4Y 09-Jan-12-26,380
View 9 Replies
ADVERTISEMENT
Jun 3, 2009
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
View 13 Replies
View Related
Sep 13, 2006
I have an array that I'm using - and it works perfectly: =SUM(If((FREQUENCY(If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""),If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""))>0),1))
Now, what I would like to do, is see how many of these unique numbers relate to another number in column D
See attachment.
View 4 Replies
View Related
May 26, 2006
Given the following data located in Sheet1 of a Workbook -
•I have seven columns (assume header row names are “A, B, C, D, E, F, G”) each containing numeric data in random order.
•All columns are of the same length (equal number of rows), followed by a blank cell, but the number of rows is unknown.
•Columns with header row names A-E will only contain numbers from 0 to 100, while F and G may contain numbers from -127 to +128.
Here is what I would like to do –
I would like to be able to analyze the data in columns A-D to locate rows that contain specific combinations of values (ex. row 41 contains the values 50, 0, 0, 0 and row 239 contains values 100, 0, 0, 0 in columns A – D, respectively, etc.).
For each row that is found to contain one of these combinations (there are many different combinations required), I would like to copy the associated values from columns E, F, & G for that row, and paste them into their respective (E, F, & G) columns located on Sheet2 of the same workbook. However, I would like to paste the E, F, & G values into a specific row order on Sheet2, DETERMINED by the value of the A – D combination identified on Sheet1.
Continuing with the ex. above, let’s say I would like to have the EFG values from row 239 in Sheet1 copied to row 10 in Sheet2, while the EFG values from row 41, Sheet1, are to be copied to row 11 in Sheet2.
In effect, I would like to create a table of this subset of data, in a specific order, from which I could work later.
I can do this manually using “ AutoFilter” to locate the data I need and then write formulas to copy the data from Sheet1 to Sheet2 in the order that I need, but every time the order of the original data on Sheet1 changes I have to start all over.
View 9 Replies
View Related
Jan 25, 2010
I tried this (attached File) formula but can't make it work. Formula in F17
View 2 Replies
View Related
Oct 24, 2008
I'm creating 10 'categories' for Column "C" that I plan on using drop-downs to select from. Column "H" has a value tied to "C". What I want to do, is have Excel SUM all of the values in Column "H" where the Category in "C" is a specific text value (e.g. say a category is "hardware", I want a cell with a formula that sums all of the values in "H" where "C" is "hardware".)
View 8 Replies
View Related
Jan 31, 2009
I am looking for help in developing steps in a spreadsheet to calculate a sum based on a few conditions. The basis of my spreadsheet works fine, however I am trying to add the contents of a cell to another by checking other cells.
For example:
Cells A1:A10 contain a numerical sequence (1-10 respectively) to indicate a "Node"
Cells B1:B10 contain a user selected number (1-10) which defines the Node it is fed from. We'll call this "Fed From Node".......ie. If Cell B2=1, that means that Node 2 is fed from Node 1.
Cells C1:C10 contain a value which is input by the user. We'll call this "Amps"
Cells D1:D10 would show the total "Amps" of the current cell added to all others that are fed from same.
What I am ultimately trying to figure out is how to add the "Amps" to each "Node" and show the results in column D.
More specifically if the spreadshet looks like the following: ...
View 9 Replies
View Related
Feb 12, 2009
Can Conditional Formatting be set on multiple values? I cannot get this to work with any formula, the cell values are not between two values. For example: for value = D or R, or X change color to green. (I would have another condition within a range F to Q)
View 4 Replies
View Related
Aug 18, 2009
This how it looks like, i used this code (see below) to get the amount if there is a word "ins" (martin's code)
IF(AND(ISNUMBER(SEARCH("ins",B47)),NOT(ISNUMBER(SEARCH("insp",B47)))),LOOKUP(99^99,--("0"&MID(B47,MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},B47&"0123456789")),ROW($1:$10010))))+0,""))
it works pretty great, but when things getting better, i've encounter this data: 12,300 ins 09-10 flood
so what i did, is to put another if function, like this: ..
View 8 Replies
View Related
Apr 2, 2013
I have a data set that I add information to weekly. I then add a value at the end of the row, example active or inactive. I've found that, when using the remove duplicate function, it does not always remove the second instance, resulting in a loss of that added data(active or inactive). So I guess my question is, can I somehow specify which instance of duplicated data is removed?
View 6 Replies
View Related
May 8, 2014
i have a question regarding the import of csv-files. I've seen lots of working import-functions/macros but none of them. So here are my questions:
1) is it possible to import data from a csv-file into specific cells in my worksheet? Let's assume i have a csv-file with 10 INT-Values and they all should be placed in different rows/colums with no regular pattern.
2) If the answer of "1)" equals "yes": how is it possible?
(i thought about importing the csv in an so called "helper-worksheet" and use formula/references inside the table, but to be honest: That's not the solution i like to have)
View 5 Replies
View Related
Feb 21, 2008
I have a spread sheet with following:
Name|Address|Home Phone| Cell Phone| Status|Project Name|
I want to select name and extract only home phone and cell phone nos.
Please help me with a code. I have about 2500 entries.
View 14 Replies
View Related
Nov 29, 2009
I have been trying to do the following but have not been successful. thanks in advance for helping!
- i have lots of text strings on one worksheet
- some text strings have <randomstring>, some even have multiple instances of <randomstring>, but others don't have a <randomstring> at all
- what i want is remove anything within "<" and ">", including the operators "<" and ">"
i have done this so far, with simple text functions, have each of the following lines in separate columns (text string column is "C"): .....
View 10 Replies
View Related
Jan 16, 2010
I'm new here and not really that familiar with excel functions and programming so please forgive me if this is not the right place for my thread
I am wondering how (if possible) I can make this little scenario work:
Lets say I have
cell (A1) with the value 2
cell (B1) with the value 3
Now somewhere else I wish to color some cell to create a 2 by 3 "block".
So coloring 2 cells horizontically (the value of (A1) and 3 cells Vertically (value of (B1)
View 12 Replies
View Related
Sep 13, 2010
I am trying to select specific values within an array.I have two tables, weight table and a factor table. These tables are a lot bigger than the example. I am trying to multiple the weights times the corresponding factors and then sum the result in one cell using arrays.
The third table is the result I am looking for. However, I would like to use some type of index/match or choose to get the result but cannot figure out how to do it. A couple of functions that I tried that did not work are next to it.
The index fails because the index function does not output an array (The result of the index function is just 4% instead of {4%,3%,4%}). The choose fails because the choose function does not select values within an array (ie I would have to put each factor as a separate value (F4,G4,H4) rather than the entire array (F4:H4). There are so many factors that I would like to avoid that.)
Sheet3
ABCDEFGH1 2 3NameWeightFactor DateFactor1Factor2Factor34Name125%Factor3 7/1/20105%3%4%5Name235%Factor2 8/1/20107%2%3%6Name240%Factor3 7 8DateReturn Does not work 97/1/20101.04% 4.00%#VALUE! 108/1/20102.65% 3.00%#VALUE!
[Code] .......
Array:
Produce enclosing { } by entering
formula with CTRL+SHIFT+ENTER!
View 3 Replies
View Related
Aug 18, 2011
Having a large spreadsheet with Columns A to F filled with data.
I'm trying to create a formula that's count the unique value "Order no." (Coloumn F) but only the ones between certain Departments Column(H) a certain "Error type" in Column(J).
View 8 Replies
View Related
Jul 6, 2009
i'd like formula to find value above and below specific cell
for ex
i have value in cell c5
i want formula helps me to find
values above c5 in cell c4,c3,c2,c1
and
values below c5 in cell c6,c7,c8,c9
View 9 Replies
View Related
Dec 11, 2009
as-18542-1
sp-25641-1
as-35678-4
u can see in that no last part like this.-1,-2,-4
i need to remove that part.i have lot of no like this.i am going to do this manually it will take long time.pls some body can make macro or something for this.
answe should be like this.
as-18542
sp-25641
as-35678
View 9 Replies
View Related
Jan 16, 2008
I Need to loop through col W Used range except the last row which is totals or the first 4 rows which is Heading stuff, and if value > 0 post it to a column on the right based on the day code. ( 31 values 1 for each day)
Day code is in cell M1 and is an Integer
eg
Day 1 = Post to Col 101
Day 2 = Post to Col 102
etc...
View 6 Replies
View Related
Mar 27, 2014
I will set a base example first:
9 Nov 2012 Apple 5
12 Dec 2012 Apple 3
14 January 2013 Banana 8
17 January 2013 Apple 6
20 January 2014 Apple 3
I would like a sumifs formula that will only add the results for Apple - as follows:
Nov 2012 5
Dec 2012 3
Jan 2013 6 (i.e. does not include Banana - and also does not include Jan 14 Apple)
Although I have experience with sumifs I have not been able to use the correct syntax to identify the month AND year.
Ultimately I want to look through many hundreds of dates, and add anything that fits two criteria - 1) a 'name' criteria, and 2) it falls within a certainly month and year.
View 6 Replies
View Related
Mar 28, 2014
How would I go about finding the "Number of Shirts Ordered" values in the top right?
View 1 Replies
View Related
Apr 22, 2014
I'm trying to identify where a set of values 'agree' within a specified tolerance.
I have a list of scores from different sources, and wish to both average them (easy to do) but also to identify how well they 'agree' by flagging those which have a difference above a specified tolerance. The numbers are all integers, and the tolerance will be an integer.
To give an example, I might have cells with values (2,3,2,2) and these agree within a tolerance of 1. If I had cells of (2,4,2,2) these wouldn't agree. I'd like to flag (by the creation of an 'X' within a separate column) where these cells do not agree.
I've done this previously by using chained If and Or statements (e.g. if A1 = D1 or A1 = D1+1 etc etc) but this is laborious and means I have to change logic every time I add a new sample.
Is there a way of specifying a range of cells (e.g. A1,D1,H1, J1) and seeing if the values of these cells agree to within a stated tolerance? I'm happy to define named cells to specify and argument/attribute.
View 2 Replies
View Related
Dec 29, 2008
I want to use vlookup up function to search for a specific data set. when it finds it i want it to look 2 columns over and add the value then continue to search for the specific data set again in the range provided in the vlookup, when it finds another matching the criteria look 2 columns over and add that cell value to the previous count.
keep a running total until it has looked through the whole sheet. here is an example of the vlookup i am using, it is not suming because thats where im stuck. also a quick data set to picture what i am talking about. In the data set in plain terms i want to look for the line name and add the qty on that line into a chart.
=IF(ISNA(VLOOKUP(A8, 'Web Queries'!G$3:H$40, 2, FALSE)) = TRUE, 0, VLOOKUP(A8, 'Web Queries'!G$3:H$40, 2, FALSE))
LineOrder_NumQTY
7L58545487320
7L5856060351
Z_56784817515
Z_56784824115
Z_57454577222
Z_57454562424
Z_57454547524......................
View 5 Replies
View Related
Nov 15, 2009
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
View 4 Replies
View Related
Jan 28, 2010
=(SUMIF($J:$J, "Player1",$K:$K)+SUMIF($L:$L,"Player1",$M:$M)+SUMIF($N:$N,"Player1",$O:$O))-SUM($I:$I)
This looks up if Player 1 was in the top 3 scoring zones and adds up the players total score.
I have another column in this table of data labelled 'Number of Players'. I was wondering how to lookup the total score for this player in the games he played under 6 players for example and the games he played in where there were other six players.
I've tried using that formula ^^ with variations of IF and SUMIF formulas to try and figure it out, but I keep getting formula errors or it just returns with the total score, and not just with the total score under 6 players.
I am also trying to create a graph of date on the x axis against score to date on the y axis - everytime I try, the x axis is always numbers instead of the date?
View 8 Replies
View Related
Dec 24, 2008
I need to creating a macro to highlight entire rows if a cell in that row (C) contains specific values.
View 4 Replies
View Related
Oct 13, 2011
Column A
Row1 Orange-Apple-Pear
Row2 Orange-Grapes-Melon
Row3 Berry-Apple-Melon
Row4 Banana-Grapes-Melon
Row5 Orange-Grapes-Banana
Given the information above:
I want to find a macro that will auto filter on for example
"Banana" would filter to rows 4,5
"Orange" would filter to rows 1,2,5
"Apple" would filter to rows 1,3
View 4 Replies
View Related
Oct 31, 2011
I have data in the following type
A Criteria B
A Criteria C Criteria A
C Criteria C
D Criteria 1
2 Criteria 3
Criteria 2
3 Criteria
I need a formula that will count the number of unique values in column A that have "Criteria" in column B. In this case the desired output would be 5 (A, C, D, 2, and 3), a blank cell in column A does not need to be counted.
View 9 Replies
View Related
Mar 8, 2012
Is there a VBA code I can use that will delete all rows that contain "ABC" or "YXZ" or "HHH" in column A ?
View 2 Replies
View Related
Aug 25, 2012
I want a range to be filled based on 2 cell values in my sheet. The autofill range should be filled based on the values in the input range. For instance in cell A1 I place the value 1 and in cell A2 I place the value 10, then the macro should automatically fill in the numbers from 1 to 10 in another column. If I change for instance the input values to 5 and 15, then the autofill range should fill up the numbers from 5 to 15.
View 4 Replies
View Related
