I want to SUMIF on 3 columns of data - that is :
=SUMIF($C$3:$C$217,A9,$F$3:$H$217)
But this only returns the data in column F, rather than summing the instances in all 3 columns.
Is it the case that I must use multiple SUMIF functions with each range separated?
This is what i was using,
=AVERAGEIF($B$198:$B$240,B254,$C$198:$C$240)
I want to add more sets of ranges and average ranges like this,
=AVERAGEIF(($B$6:$B$48,$B$70:$B$112,$B$134:$B$176,$B$198:$B$240),B262,($C$6:$C$48,$C$70:$C$112,$C$13 4:$C$176,$C$198:$C$240))
Which of course returns #VALUE!
I am trying to sum a value from one (table) sheet of excel into another, based one these two conditions:
1.) a value from row matches the value set in a different sheet.
2.) a value from a column matches the value set in the different sheet.
I have my two separate sumif statements set up, and they work perfectly on there own, but I cannot seem to combine both conditions into one to put out a correct value. Sumifs will not work due to the fact I am using different sum ranges. Maybe I should use Dget?
here are the two sumif statements:
=SUMIF('Pagex'!$C$5:$C$26,'Pagey'!$E7,'Pagex'!F5:F33)
=SUMIF('pagex'!$D$3:$I$3,'pagey'I4,'pagex'!$D$5:$L$5)
The section I have highlighted in orange has three ranges added together how would I show this in a simplified formula?
=sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$85:$GA$85)+sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$44:$G A$44)+sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$41:$GA$41)
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
100
100
100
100
etc...
Here is my code including the named ranges:
[Code] ......
I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
The following table is used in the sumif.
I would like the sumif to use the range with the names, and the range with the dates.
I have a GUI in which the user enters a name and a date and the $ amount earned for that week should appear.
The criteria is the name and the date.
******** ******************** ************************************************************************>
Microsoft Excel - Business Book.xls___Running: xl2000 : OS = Windows Windows 2000
(F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutP20=
IJKLMN3******4michaelb1*14$400.007/21/20025Michaelb1215$450.007/21/20026
[Code] .........
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
View 4 Replies View RelatedI have an old version of Excel and want to use sumifs()
This means I want to add data based on 2 conditions. What should I do?
How does one add data to a field that has existing data? For example, say I have a list of different people names and want to say the word "visitor" at the end of each name how is that done for an entire list without have to do it one by one. Also how do I add a word to the beginning of a list of names as well?
View 2 Replies View RelatedI'm trying to get a sum only if 2 conditions are met.
Column A has dates (ex. 01/02/2007) in a random order. Column B has a location in a text format (ex. London). Column C has a series of values formatted as [h]:mm.
What I'm trying to do is get a sum of the values in column C where the corresponding values in columns A and B = the date and loction I specify. I've tried...
=SUM(IF(('Jan ''07'!A$2:A$750="1/2/2007")*('Jan ''07' E$2:E$750="London"),'Jan ''07'!J$2:J$750))
but it's returning zero values regardless of the criteria being met or not.
I am new to excel and functions I am trying to put together a spreadsheet of computer costs. Basically I am listing various mobos, cpus, psus, etc. I have a column that signifies which mobo/cpu/etc I want to include in the actual total cost of the computer. Currently the only way I can perform the summation is to create a long drawn out calculation, which is a pain if I need to add more rows to the spreadsheet. I want to try to do a summation.
So, the grid looks something like the following:......
I have the following formula that I am trying to use but the result is #VALUE:
=SUMIF(Sheet1:Sheet9!B1,"PMI",Sheet1:Sheet9!A3)
The formula should look in cell B1 of each sheet and if it is equal to "PMI"
sum of the value in cell A3 in each sheet.
My book is telling me that I can't use multiple conditions with a SUMIF
statement but other sources are telling me I can. Either way, it's not
working!
My situation:
Look at data in $V$2:$V$144 (range = "group"). If cells in "group" =
"Broth" then look at $Y$2:$Y$144 (range = "bldg"). If "bldg" = "1" then sum
corresponding cells in $R$2:$R$144 (range = "fcst").
This is one of my attempts - feeble...
=SUM(IF(group="Broths",IF(bldg="1",fcst,0)))
I want a sumif where:
=sumif(f2:f500,
if column f has a 7 in it and if column e is greater than 5
I am trying to use multiple "ifs" and then summing the cells that obey my conditions.
Let me give an example:
Column A - place
NY
Chicago
Los Angeles
San Francisco
Column B - object
gate
keyboard
pencilcase
cellphone
[code]....
I want the ifs and sumifs to:
Check if place = NY
Check if object = keyboard
Check if condition = failure
and sum the prices when all of the above are true.How do I do it??
How can I sumif over multiple tabs?? Without using sumif(a:a,sheet1!a1,c:c)+sumif(a:a,sheet2!a1,c:c)
Like sumif(sheet1:sheet2!a:a,a1,sheet1:sheet2!c:c) I do not want to use a macro. I have about 80 sheets.
Sheet1
Apples 93
Pears 49
Oranges 20
Bananas 35
Sheet2
Apples 100
Pears 13
Oranges 2
Bananas 350
I have got a workbook with multiple sheets, each sheet is in the same format but with different products across the top. The below formula sums the relevant columns by looking for the column with the relevant product code then sum accordingly. How do I amend the formula so that it does the sum for multiple sheets. I could just copy the formula for each sheet but their must be a better way to do this.
Code:
=SUMIF('FM'!$A:$A,$A2,INDEX('FM'!$A$1:$J$34,0,MATCH(Summary!B$1,'FM'!$1:$1,0)))
How to use formula approach to get the total figure for A & B
A
1
2
3
B
4
5
6
[Code]....
I have to SUM vendor totals in my spreadsheet and SUMIF worked perfectly, but only for one column of expenses. I need to sum over fifteen columns but searching told me that SUMIF / SUMIFS will not work. Is there another way?
View 9 Replies View RelatedI'm trying to sumif across multiple columns, only if there is NO data in the first cell of the row. Column A is not in use - B contains some blank cells and some with data. In columns C:AM I want to sum all data in rows where the cells in Column B are blank.
Code:
=SUM(SUMIF($B$2:$B$191,"",C2:C191),(SUMIF($B$2:$B$191,"",D2:D191)),(SUMIF($B$2:$B$191,"",E2:E191)),
(SUMIF($B$2:$B$191,"",F2:F191)),(SUMIF($B$2:$B$191,"",G2:G191)),(SUMIF($B$2:$B$191,"",H2:H191)),
(SUMIF($B$2:$B$191,"",I2:I191)),(SUMIF($B$2:$B$191,"",J2:J191)),(SUMIF($B$2:$B$191,"",K2:K191)),
(SUMIF($B$2:$B$191,"",L2:L191)),(SUMIF($B$2:$B$191,"",M2:M191)),(SUMIF($B$2:$B$191,"",N2:N191)),
(SUMIF($B$2:$B$191,"",O2:O191)),(SUMIF($B$2:$B$191,"",P2:P191)),(SUMIF($B$2:$B$191,"",Q2:Q191)),
[Code] ...........
I am performing a sumif to look to see if a number starts with #, then another to see if the the class is text, both are fine and both return values of 1 if it meets the criteria. My problem is i then need to add a sumif (or something im not quite sure wot) to add the cost if the number begins with a # and the class is text (so baically if both the other sumifs = 1).
View 9 Replies View RelatedI want to do a SUMIF formula and add only certain words in column A.
Column A has a list of airlines in it, and column H has a list of flight durations. I want to add together all of the flight times but for only a few airlines.
I tried to put OR in the middle of the SUMIF function, but it didn't work:
=SUMIF(C:C, "Air Canada" OR "Air Tahtiti Nui", H:H)
How would I get it to add together all of the flight times for Air Canada and Tahiti Nui, without having to put many SUMIF formulae?
I am preparing an analysis of my company's expenses for the last two years by account. One on excel sheet I have the raw data,
bank account, payee, payment date, clear date, amount, payment type
(This is from all accounts for the whole 2 year period.)
In the second sheet, I have a summary schedule setup. The summary is setup like this:
Account #
Row 1: Begin Date
Row 2: End Date
Payment Type 1 AAAAAAA
Payment Type 2 BBBBBBBB
I would like to come up with a formula that will populate AAAAA & BBBBB for a given account during a given time period. For example, I would like it to give me the total of Type 1 payments from account 12 during the period January 2, 2005 through January 27, 2006.
Right now it is only giving me the info for 1 payment type and 1 account. Here is what I have now {=SUM(IF(Detail!$G$10:$G$3942>=R$5,IF(Detail!$G$10:$G$3942
I am using a sumif formula where if column b is a certain number then it will add up the value in column e.
This works fine, however now I wish to add another filter, which is only for it to add the values in column E if the value is b is correct (as above) and also if column c has a value of 100.
Column A |Column B |Column C
Store_Name| Dates |Revenue_Generated
I want to sum the revenue generated in every row where:
Store_Name = "x"
Dates >= Date1
Dates