I am trying to sum a value from one (table) sheet of excel into another, based one these two conditions:
1.) a value from row matches the value set in a different sheet.
2.) a value from a column matches the value set in the different sheet.
I have my two separate sumif statements set up, and they work perfectly on there own, but I cannot seem to combine both conditions into one to put out a correct value. Sumifs will not work due to the fact I am using different sum ranges. Maybe I should use Dget?
here are the two sumif statements:
=SUMIF('Pagex'!$C$5:$C$26,'Pagey'!$E7,'Pagex'!F5:F33)
=SUMIF('pagex'!$D$3:$I$3,'pagey'I4,'pagex'!$D$5:$L$5)
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
" A B C D | SUMMARY model qty| modelqty 1 4.12922.0000| 4.12952.2000 2 2.000012.1250| 2.000025.1250 3 4.12929.0000| 318.0000 4 318.0000| 5 4.1291.2000| 6 213.0000| "
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I got a column A containing a alpha-numeric data and want to sum up the numeric value of each cell which begins with "t" and have the sum divided by 486 (i.e. (120+230+25)/486). I tried the following formula but to no avail.
I have worksheet of data. I have another worksheet that is used just for a summary. This data is mapped to a "Job number" (1123646, 1256974, etc.) The first two numbers determine what area it is referring to.
Each column represents a different amount (month to date cost, month to date profit, year to date cost, year to date proift, etc.) I need to summarize each column for each area and display the result on the other worksheet.
I can't use exact ranges like = sum(a9:a31) b/c that range will change each time the worksheet is used. I thought maybe using a loop, but then I got stuck and don't know where to go from here. Here is what I have so far.
Sub SumProfit()
Dim C As Range, sh1 As Object
Application. ScreenUpdating = False Set sh1 = Sheets("JB-PRF") Set C = Range("A9")
I don't want to abuse LOOPING or VBA for that matter, but I don't know of any other way to accomplish this seeing as how the ranges will not be the same each time. the shee that the data should be extracted to is named SUM-PRF
What I want to do is Take this and add in the multiplier from column "H" in the "***" page. I need to change the name of that tab, I am not trying to be foul. I just use that short for assembly. It looks bad, but usually, I'm the only one that sees it.
Basically, I want to take the material qnty and multiply it by the multiplier and put that in the box on the po page that accumulates the material.
I am having a problem with a formula I think I should be able to get correct but not sure if I am able to do so. On the attached file I have a filter on the TIER's for "Is grater than or equal to 5". What I need is a SUMIF formula that will take into account the filters. This formula needs to separate out between "GER", "IRE" and "UK" in cells C37, C38 and C39.
I have a subtotal in cell C35 which gives me the subtotal of all countries but I'd like to be able to have the subtotal separated out between the 3 countries and also still have the ability to manipulate the data so I could select different TIER's or a range of TIER's and Cells C37 - 39 automatically update themselves.
I have an entire excel column which was filled-in with values ranging from 1000 to 40000. What I was trying to do is to just sum up the all the values which are between 9000 and 20000. I tried using the sumif function =sumif(and(A5:A40,">9000"),(A5:A40,"<20000")) but it does not work, it says that the formula that I typed contains an error.
I am trying to use SUMIF as part of an IF statement, What I am trying to do is, for example, if a column has two values M and P, then SUMIF only those rows that have a corresponding M, and not calculate the P's.
I am trying to take a census by date and name for every half-hour using the attached data. So for example, I would like to know how many people Roger had that walked-in and walked-out for each date on the spreadsheet and during what hours. The census would be every half-hour and not double count times. I could actually deal with just the min and max time for the day (by date and name) and having some indicator (say a one or an X) in the cells when Roger had at least someone anytime between walk-in and walk-out. It's kind of like getting a "time worked" based on the data that's provided to me. So I know how many hours Roger worked by day.
