I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
I'm using Excel 2010 and would like to know if it's possible to convert selected ranges in multiple sheets into one PDF file? For example, I want to select range("A1:O10) in Sheet1 and range("A1:N25") in Sheet2, then convert both Excel sheets into PDF file with two pages.
View 2 Replies View RelatedI've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I have a problem with using VBA to calculate max/min within multiple selected ranges.
Here is the file: [URL].... I've also attached it below the post.
Column A to D contain the raw data, column G to L contain the trading data. Each trade is marked with "tick" which consists one buy/sell and one close. The entry and close date&time are also included. Then how to match each entry and close date&time from right to left and therefore to look up max/min value within entry and close time from the raw data in the left columns? Respectively, I would like to calculate the min(low) for a buy/close tick and max(high) for a sell/close tick.
The challenges for me:
1.How to match, or reference from the right to left. I knew that "vlookup" could only match one certain value. (correct me if I didn't know enough about "vlookup")
2.The date&time in the left are time intervals while those in the right are time points. How to refer and locate them?
3.In the right side, length of intervals that each tick marked (i.e.from buy to close) are not the same, so should I use a array to contain the length, and then calculate max/min within each? When the data amount get larger, it is not possible to manually use "min" function.
example2.xlsx
The User has made multiple selections with the mouse. The spreadsheet is filtered. The user will usually make different multiple selections on the following columns: A and X through to AR (inclusive).
I just need some code to capture these various multiple selected ranges so that I can copy the selected range as shown below:
Sub DynaSort()
Dim wsSheet As Worksheet
iRow = ActiveSheet.Columns("A").End(xlDown).Row
For Each wsSheet In Worksheets
Select Case wsSheet.CodeName
Case "Sheet2", "Sheet3", "Sheet4"
wsSheet.sort.SortFields.Clear
Range("A3:I" & iRow).Select
wsSheet.sort.SortFields.Add Key:=Range("F2:F" & iRow) _
, SortOn:=xlSortOnValues, order:=xlAscending, DataOption:=xlSortNormal
wsSheet.sort.SortFields.Add Key:=Range _
("H2:H" & iRow), SortOn:=xlSortOnValues, order:=xlDescending, DataOption:= _ ...................
The problem that I has is that I cannot put focus on a cell after the sort. Xl keeps the columns selected and then when I'm trying to put in the next data Excel selects all the rows in Sheet1 also. I know how to get rid of it and continue, the users on the other hand are not that experienced with excel. fun thing, even thou the, Range.value is inside the IF it putt "pucko" in sheet1. I have a code that copies the data and then put some several functions in each sheet, after that I call the sort routine.
I have around 150 excel files with sample data as follows in "sheet 1" of each workbook,
Excel doc 1:
ABC1
Column 1Column 221Data 1Data 132Data 2
Excel doc 2:
ABC1
Column 1Column 223Data 3Data 334Data 4
I want the rows with data in column 'B' and empty column 'C' from every sheet to be copied into 1 sheet.
Output to be as,
Final Excel doc:
ABC1
Column 1Column 222Data 2
34Data 4
I have a VBA code sample to select the required files in a folder and run the macro over it. The VBA is as follows,
Sub Importxlsrows()
'Import all selected rows to one sheet
Dim xlsDoc As Object
Dim xlsFileName As Variant
Dim RowNo As Integer 'row number in excel
Dim iRow As Long 'row index in Excel
'probably here we need to insert the required logic
End With
Set xlsDoc = Nothing
End If
Next i
ShowStatusFree
MsgBox "Required rows of selected files are imported into the sheet", vbInformation, "Done!"
End Sub
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
I need to clear the the text in the same cell ranges on multiple worksheets. on a regular basis.
F7:K13
Q7:Q13
Is there a simple way to do this?
Is it possible to form a single Range object from ranges on multiple sheets. So for example, would it be possible to set a Range object equal to cells A1:D146 from Sheet 1 and A1:B49 from Sheet 2 and if so, what would be the syntax? For the first I have:
Sheets("SelectData").Range("A1:D146").SpecialCells(xlCellTypeVisible)
but I wouldn't know how to proceed from there.
I am trying to write what I thought would be a simple macro to print out specific areas of my worksheets. I have shown the code below; the line causing the problem I have highlighted in RED. I am getting the following error message: "Select method of range class failed".
Reading other posts here. I think this may have something to do with the macro being assigned to a command button in one worksheet (AY114) and I am trying to get the macro to run on both the worksheet that the command button is in (AY114) as well as another worksheet (AY062).
Sub CommandButton1_Click()
Range("J2").Select
Sheets("AY114").Select
Range("A4:J53").Select
ActiveSheet.PageSetup.PrintArea = "$A$4:$J$53"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
ActiveWindow.SmallScroll Down:=45
Range("A56:M151").Select
ActiveSheet.PageSetup.PrintArea = "$A$56:$M$151"......................
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
I want to to copy selected columns of sales data into rows organized by salesperson. I have just started out with VBA and find that I cannot do it myself.
My original data are in the form of the following:
invoice_no
product
sales
qty
total
[Code] .....
I want to display the data in another sheet in the following format:
sales_a
sales_b
sales_c
sales_d
[Code] ...........
In my userform I have a list of check box's that can be selected. Currently if more than one is selected, they will appear in the spread sheet in the same line one after another with a space between them. How do I make it so they either appear with a comma appearing after each, so the next value appears on the next line below or most perferably the cell turning to a drop down list with the values?
Current code
VB:
If CheckBox1.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox1.Caption
If CheckBox2.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox2.Caption
If CheckBox3.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox3.Caption
If CheckBox4.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox4.Caption
If CheckBox5.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox5.Caption
If CheckBox6.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox6.Caption
Spreadsheet current cell appearence if all 6 are selected ' Chinnook EH101 Lynx Puma Sea King Fixed Wing'
Required appearence:
Chinnook
EH101
Lynx
Puma
Sea King
Fixed Wing
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
View 4 Replies View RelatedI need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI have several formulas that I use over and over, so I'm creating VBA functions that I can call from a worksheet.
But...when I have multiple inputs going into a function, is there a way to remind the user which input comes next in the same way that Excel does with built-in functions?
For example, when you type in =PMT( Excel brings up the helper text so you know that the order of inputs is (rate, nper, pv, etc....
Is there a way to bring up that same helper text in my own function? So if I have up, down, right, left as inputs and give the spreadsheet to someone else, they can see it's up, down, right left and not right, left, up, down .
Im trying to make a vlookup so I can say find a record where column A is >4, B is =2, C is 1.
Example - The lookup would find these 2 ranges.
7
2
3
2
6
4
[code]....
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedI've attached a sample sheet to this message.
What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.
For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.
Sample Data.xlsx
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
file: Test formula on payroll_v3.xlsx
I have a need to populate a summary worksheet using two variables to find data in two or more other worksheets.
I find writing out what I want helps some times so let me try it here.
So my variables are:
Product (there are 22 products)
Supply Less than (inset number)
These are the two criteria I want to use to produce a result.
The next issue is I have 300 stores that carry said 22 products. Each store has a unique number 0001, 0002, 0003 etc. So in a separate worksheet I have a list of the store numbers, and then the products. So each product has the store's number to the left in Column A, Column B has the product name, Column C has the quantity on hand.
What i would like to do on the summary page is select the product, and then select the supply less than or equal to 'x' and then have the stores with the selected product less than or equal to x display below.
The last part of this is then to display (data from an other sheet) on the summary page which contains the quantity of the product selected available at the warehouse for that store.