This is what i was using,
=AVERAGEIF($B$198:$B$240,B254,$C$198:$C$240)
I want to add more sets of ranges and average ranges like this,
=AVERAGEIF(($B$6:$B$48,$B$70:$B$112,$B$134:$B$176,$B$198:$B$240),B262,($C$6:$C$48,$C$70:$C$112,$C$13 4:$C$176,$C$198:$C$240))
Which of course returns #VALUE!
I want to SUMIF on 3 columns of data - that is :
=SUMIF($C$3:$C$217,A9,$F$3:$H$217)
But this only returns the data in column F, rather than summing the instances in all 3 columns.
Is it the case that I must use multiple SUMIF functions with each range separated?
I currently have this equation: =AVERAGEIF($B$2:$B$900000,">="&L5,$C$2:$C$900000). Where L5 = 100. I'm interested in having the formula averageif B column value is between L5 & L6. Where L6 = 200. So I want it to find all values in B$ that are between >= 100 but < 200, and then average their C$ counterparts.
View 3 Replies View RelatedHow can I do
=AVERAGEIF(AZ6:AZ1721,">0",AZ6:AZ1721)
But across 18 tabs all with the same ranges???
I'm looking to average the numbers contained within 5 different columns if the corresponding cell in a different column is blank.
Here's what I have currently (with column A being the conditional cells and D:H being what I'm looking to average)
=AVERAGEIF(A3:A26, "", D3:H26)
From what I understand, this function only allows me to average a single column. If this is in fact a limitation of excel and not just of my knowledge, is there a different way to calculate the average of D3:H26 when the corresponding cell in column A is blank?
I am trying to sum a value from one (table) sheet of excel into another, based one these two conditions:
1.) a value from row matches the value set in a different sheet.
2.) a value from a column matches the value set in the different sheet.
I have my two separate sumif statements set up, and they work perfectly on there own, but I cannot seem to combine both conditions into one to put out a correct value. Sumifs will not work due to the fact I am using different sum ranges. Maybe I should use Dget?
here are the two sumif statements:
=SUMIF('Pagex'!$C$5:$C$26,'Pagey'!$E7,'Pagex'!F5:F33)
=SUMIF('pagex'!$D$3:$I$3,'pagey'I4,'pagex'!$D$5:$L$5)
The section I have highlighted in orange has three ranges added together how would I show this in a simplified formula?
=sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$85:$GA$85)+sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$44:$G A$44)+sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$41:$GA$41)
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
100
100
100
100
etc...
Here is my code including the named ranges:
[Code] ......
I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
The following table is used in the sumif.
I would like the sumif to use the range with the names, and the range with the dates.
I have a GUI in which the user enters a name and a date and the $ amount earned for that week should appear.
The criteria is the name and the date.
******** ******************** ************************************************************************>
Microsoft Excel - Business Book.xls___Running: xl2000 : OS = Windows Windows 2000
(F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutP20=
IJKLMN3******4michaelb1*14$400.007/21/20025Michaelb1215$450.007/21/20026
[Code] .........
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I am trying to calculate time in the ER, avg. time in the ER, and time before seen in minutes USING the Averageif function. However, in the columns that I am trying to calculate, there are a lot of ######### and 0:00. So I thought that if I use =AVERAGEIF(AL2:AL47,">0") then that would exclude the ######## and the 0:00.
However, it seems that the formulas are not working. For example, one column contains 00:10, 00:04, 00:05, then a lot of ########, and 0:00.
When I take the =AVERAGEIF(AL2:AL47,">0") of this whole colum then it gives me and average of 18:02!!!!
18 hours and 2 minutes can not be correct!
I am using the following formula, but for the cells that dont have data I get the #DIV/0! error.
=AVERAGEIF($B$6:$B$48,B59,$W$6:$W$48)
I am trying to use the AVERAGEIF function on the below screenshot. I have a mix of text cells (ignored by default), 0s, and whole numbers from 25-100. For some reason, the value in Q16 is incorrectly averaged. The interesting thing is, I have similar data and function in R16 and it is working as expected.
Q16 =AVERAGEIF(B16:B16:D16:D16:F16:F16:H16:H16:J16:J16:L16:L16:N16:N16,">0") --> expected value of 275/3 (decimal rounding 0 places) is 92[code]....
I need something like AverageIf function that basically takes the B column and averages only the numbers that are not 0… I have messed around with this and finally just got frustrated, maybe its because I’m using Excel 2003?
View 10 Replies View RelatedI have data that i need to average. In Excel 2007 there seems to be a function to do this but it isnt available in 2003 version.
In column A there is a load number in column B there is a total load time, i need to be able to calculate an average load time.
I've got a spreadsheet I use to track quality scores, it will appear like such, and with 2003 I don't have AVERAGEIF()
name | team | score
joe f | billing | 3
may r | billing | 3
roy m | status | 1
kay t | first call | 1
etc...
I already used an array function to find the average of each team (even with empty scores) by using:
=AVERAGE(IF(DeptRange=$B$7,C$20:C$200)) [Ctrl-Shift-Enter]
EDIT: Incidentally, I changed AVERAGE() to COUNT(), and it kicked back 9 values instead of 3 (I have one value entered for each team atm). B7 is the name of the department I'm finding the average for. I've got 3 departments in one location, and 6 in another location. I'm trying to add OR() to give me our regional quality averages, and it's not working. I used:
=AVERAGE(IF(OR(DeptRange=$B$7,DeptRange=$B$9,DeptRange=$B11),C$20:C$200)) [Ctrl-Shift-Enter]
In cells G2 to G57 I have the months from Jan-09 to Aug-13. In H3 to H57 I have the monthly data. In cell k2 I am trying to average all of the December data without individually clicking each cell (Ex: Dec-09, Dec-10, Dec-11, Dec-12). I was thinking of doing Averageif formula like =AVERAGEIF(G2:G57,"Dec*",H2:H57) but I get the dreaded #DIV error.
View 1 Replies View RelatedI cant figure out an averageif formula for a particular criteria. my criteria is any number between 10000 and 20000. Here is an example.
=AVERAGEIF(C:C,"between 10000 and 20000",G:G)
DateMachineLocationEventAmountStaffTimeComments1416041416042141604612326123211612321120410
1120512112035
I've searched around the web for AverageIf solutions and found the CSE formulas. However I've come across a big problem I can't resolve.
I have two columns of data. Column A has _similar_ text and column B has data.
The problem is the following: AverageIf does not support finding similar text. This means that a formula like:
=AVERAGE(IF(A2:A400="Info/German*";F2:F200;FALSE)) does not work.
Column A contains words like Info/German, Info/German2, Info/Italian etc. But I only need to find the average of cells that begin with "Info/German".
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
View 4 Replies View RelatedI am trying to use the AVERAGEIF function to give calculate averages based on dynamic data. The formula I want to work is:
[Code].....
but this returns the "#DIV/0!" error.
However,
[Code] ....
returns the correct value.
I want to be able to calculate averages of only the cells that are greater than the value of cell D6. Is there a way to do this?
I'm trying to use the average if function to average a range of numbers, only if a different range of numbers numbers equal a number in two different cells.
ex. average A1:F1 if G1:L1 equals M1 or M2
I have an old version of Excel and want to use sumifs()
This means I want to add data based on 2 conditions. What should I do?
How does one add data to a field that has existing data? For example, say I have a list of different people names and want to say the word "visitor" at the end of each name how is that done for an entire list without have to do it one by one. Also how do I add a word to the beginning of a list of names as well?
View 2 Replies View RelatedIs it possible to utilize the AVERAGEIF function for a specific range of values. For Example, instead of ">45", I would be looking to only average the cells that have values between 40 & 60. I've tried several different ways to input that into the function but nothing seems to work.
View 3 Replies View RelatedI have simple Countif and Averageif formulas that I would like to have linked to variable data in cell E6 on the Assumptions (2) tab however, the formula is not taking the cell as the criteria and only taking a hard number when I am using >=.
The example would be: I3 needs to be able to use the data changed in E6 for the >= number instead of the hardkey 29...