Summary Sheet Using Date Range
Sep 18, 2007I'm trying to create a summary sheet as a second sheet in an XL workbook. I need to pull data from another sheet in the workbook, but only from a date range entered on the second sheet.
View 11 RepliesI'm trying to create a summary sheet as a second sheet in an XL workbook. I need to pull data from another sheet in the workbook, but only from a date range entered on the second sheet.
View 11 RepliesI have a question about my Excel template: I have a workbook with 3 existing sheets in this order: DATA, Fronpage, Summary. In the Frontpage I have a clickable button to create a new sheet with name as Report1, Report2, etc. at each click. What I wanted is that when I click the button to output a Report sheet, say Report1, I want it also dynamically to copy and paste a range , for example r2c1 : r5c6 from the new report sheet to the Summary sheet. The pasted results from each Report in the Summary sheet should not be replaced, instead, should be appended separated by two rows. The Summary table is like a log file that keep track of certain rows of the report sheets. Could anyone give me a hand
View 5 Replies View RelatedI have searched for my answer but because I am new to all this I am stuggling to manipulate some of the other code that is close to what I am after..
I am trying to find a quick way of summarising data from multiple detail sheets onto a summary sheet (all within the same workbook) with the number of worksheets varying (ie: I may add or delete worksheets).
I basically want a concise summary of the other detailed sheets.
My Workbook is setup as follows:
Multiple sheets detailing each individual trade (with a summary at the bottom with the basic info I need on the summary sheet).
A summary sheet totalling the profit/ loss from all trades, costs of all trades etc (I am ok with this).
A summary sheet summarising all trades - ie each of the summaries contained on the individual trade sheets consolidated onto one sheet for quick reference:
Trade #TradePositionProfit LossHold Time
1JBHLong300030
2JBHLong250020
3JBHLong200010
1WOWShort050012
1HVNLong800015
1CLXShort500045
2CLXShort250030
3CLXShort150010
What I am struggling to get onto the summary sheet is all the individual summaries on the detail sheets. The reason for this is that each trade can have up to 3 positions: the Initial trade, Pyramid 1 & Pyramid 2. (This range is in the same location of each sheet but could be 1, 2 or 3 lines) and the number of trades I enter during the month can vary (ie the worksheet number can vary).
I don’t want to have to manually update a range, of a consolidation for example, each time I add a new trade (new worksheet) & want to view a summary.
I thought it would be easier to summaries each trade at the bottom of each trade sheet so I can pick the information up from the same spot already in the format I want it in for the summary page.
Does anyone have any suggestions on how I can get the summary to search each sheet, no matter if there is 1 trade or 50 trades & pull the summary information which is located in the same spot onto the one sheet for a quick view?
I have an excel workbook containing 123 worksheets. Sheet1 I have titled "Summary" and I wish to copy data from the remaining sheets (2-123) into it. Each sheet is formatted in the same way, and I wish to take the data in cells E66:G130 from each worksheet and paste it into the Summary sheet (so, Sheet2's 3 columns would be pasted in cell A1, Sheet3's in D1, and so on).
I gave a couple of codes a go (this one is from a thread "Copy Data From Multiple Worksheets & Append To Single Worksheet", I tried to alter accordingly):
Sub SummurizeSheets()
Dim ws As Worksheet
Application. Screenupdating = False
Sheets("Summary").Activate
For Each ws In Worksheets
If ws. Name <> "Summary" Then
ws.Range("E66:G130").Copy
ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)
End If
Next ws
End Sub
However, I don't understand what "ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)" refers to - I am told there is an error with this line ("compile error expected =").
I also tried the Consolidate function, but had problems as well.
I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies View RelatedWe have an equipment sheet that our sales team fills out when quoting customers. The sheet has everything from the items Brand, Model Number, Description of item, cost, MSRP, ect... on it followed with a QTY that is needed. Now one of my jobs is to go through the sheet and create a summary page of everything that is selected and place certain data onto this "Summary Page". This is what I am trying to do:
When a QTY of greater than 1 is selected on the "Equipment" page it will autopopulate the "Summary" page with certain data, mainly the description of the item followed by the QTY ordered. Let me see if I can do an example below
Say I have this equipment list below:
'EQUIPMENT' Sheet
Example.png
Now since a QTY greater than 1 has been placed into column E2:E5 I would like to populate data from the corresponding B, C & D column into the 'Summary' sheet
'Summary' Sheet
1 HD51 I/O, Rugged Dome, HiRes, VF Lens
3 HD73 IR, I/O, Rugged Dome, HiRes, VF Lens
I hope this makes since. If I am able to do this it would save me countless hours of CTRL+V CTRL+C work, that and its hard to catch every value when you have over 3,000 items on a equipment sheet.
i want to delete any sheet after sheet called "Summary"
View 1 Replies View RelatedI have a summary sheet which shows a range of information to give a full overview of the main information from individual feature forms.
At present, the manager is manually linking the cells from this sheet from the individual feature sheets with the normal =A1 kind of formula.
Is there an easier way to do this?
The solution would need to insert a new row each time in the summary sheet and pull out about five key bits of information from the feature sheet.
I am trying to prepare a time and attendance system for our warehouse.
I have a download of clocking in and clocking out times.
I want to look up the times based on the person name and the week commencing date.
I want to create a main summary sheet which will have two combo boxes, one for names and one for weeks so that when these are changed they update the times.
I would like this done in VBA because when the times are updated I want them to appear as values and not formulas.
Also, the data range will be large (approx 13000 lines for 15 weeks data) so the code needs to be efficient enough as to not make the file too big.
Consider two columns (these columns are part of UNIT TESTing workbook).. result column shows the result of test case executed on respective date
DAte Result
17/1/2008 PASS
18/1/2008 FAIL
18/1/2008 PASS
19/1/2008 FAIL
22/1/2008 PASS
22/1/2008 PASS
How do i calculate using VBA statements :
1. the number of PASSED TEST CASES that are excuted today.
2. Number of all PASSED TEst cases till yesterday.
I have a summary sheet with a numerous data sheets to the left of it in a single workbook. Every time I add a new data sheet I have to type it's name on the summary sheet. How can I automate this?
View 9 Replies View RelatedI’ve had a look through the forum and on some of the guides/FAQ but thanks to my ineptitude I have been unable to adapt any of the examples to my specific situation.
What I’m after is this: I need to create a summary sheet for a work book with a variable number of tabs. All I need the summary sheet to do is to make a table of the name of the tab and then cell A17. How would I go about doing this and is it possible to save this macro to my machine/all workbooks instead of just the one?
I've got a multi-sheet workbook and I'd like to have a summary tab of all of the tabs that have a name starting with "Site"....I have Site 123, Site 234, Site 567 and Location Listing. I've run a macro that I found on the internet and it works to copy all content to the new sheet, but, I prefer that the macro not need to be run to update the summary tab each time a change is made to one of the other sheets because this workbook is for someone that wouldn't know how to run the macro.
Every "site" sheet has the same columns, but the number of rows is different.
There will be new "site" sheets added and I want to make sure there is a way to update the summary sheet when new "sites" are added.
What is the best way to do this or is it even possible? I've attached my example workbook.Tracker.xlsx
I have a Workbook that has 12 worksheets in it, one for each month (January '14, February '14, ect.). Each sheet is identical with A1:Q1 being the same headers on each. I need a way to consolidate each sheet into one new summary worksheet. The issue I'm having is with the headers being copied multiple times on this new summary worksheet; appearing when a new month is listed. Row 1 of the summary sheet should be the header row and the following rows the data found on each monthly worksheet.
View 1 Replies View RelatedI have a sheet in my workbook named Summary, from this I would like to run a macro that cycles through every sheet except "Summary" & "Variables" & "Cash" and puts the sheet name in E5:down and cell AH30 from every sheet in F5:down.
I know it's possible, but I'm not sure how to set up the loop.
i had created a userform with data in Sheet1. what i want is to display the whole summary in a form using the worksheet function.The form need to display the amount and count of the expenses in the range(Sheet1) from the values in the combobox.i m unable to find out where i m getting it wrong. hope i had made the code 90%correct. Pls help me. One more thing is there any other form in which i can display the summary dynamically on selecting different items from the combo box. i mean can i show it in a new form.
View 11 Replies View RelatedI have a spreadsheet which details an employee number, name, event type and no events as shown in attachment. (SHEET1). I would like to be able to create a summary sheet in the same workbook which will search through the list of usernames and produce a summary for each user.(SHEET2). The number of users varies in sheet1 so I would need to handle this dynamically.
View 4 Replies View RelatedI have to prepare monthly sales register with a consolidated sheet. I exported site wise data from Tally. Since there are more than 100 sites, it is very difficult to prepare it manual. I am posting a sample file with 7 sites data and a consolidated sheet. I have copy paste first 3 sheets data to the respective column of consolidated sheet. Is there a way to do it through macro? Below is the link of sample file
[URL] .......
I need to make a "aummary" or a pod sheet? what I need to do is make a page that will automatically tally up new information I put into new work sheets. right now I have 5 work sheets and the totals I need totaled are in different row #'s on each sheet. How can I do this so it will add the numbers automatically?
View 9 Replies View RelatedI have not had to do too many complicated formulas or macros but i could definately use some help on this. If it would be easier to email this workbook to someone, i am more than willing... please be gentle...
I am trying to create a worksheet in my workbook that lists all of the rows from several sheets with the following variables.
1. data from the worksheets named January through December
2. containing a dollar value greater than $0.00 in columns F or G
3. and column I is blank
To display on a worksheet named "Backlog"
It would be pasting this data to A6
My brother created an invoice for his company using excel; it's s typical invoice:
Name, Date, Invoice# Total, Tax, etc. He would like to have all of the mentioned information transfer to a summary sheet as he has between 30 and 60 per quarter. The problem is that they are not in a workbook. So each invoice is it's own .xls file. This can be time consuming if he had to open and copy from each sheet.
Is there a way to copy the info to a summary sheet?
I will have a summary tab and then a number of tabs with various options in detail
What I would like to do is some way of adding the options on the summary tab - some sort of drop down I guess
Is this possible without lots of programming etc...
I have 52 sheets in my workbook. Is there a simple way of creating a summary page of the data contained within specific cells which are the same reference on each sheet ?
The slow way is to edit the Sheet reference in the formula, but I sense this is not the most elegant way to do it.
Sheet 1 Cell A1 = 453
Sheet 2 Cell A1 = 234
Sheet 3 Cell A1 = 543
Sheet 4 Cell A1 = 945
I start off with this formula ='sheet 1'!A$1
Copy it down my summary page, then edit the sheet reference for each page.
='sheet 1'!A$1
='sheet 2'!A$1
='sheet 3'!A$1
='sheet 4'!A$1
This is simple enough to do, but is laborious for lots of references.
I have Sheet 1 that does some calulations and will Output my values e.g.
1X2X
44XX
3XX1
there are also - - - - in the cells for some cells that does not meet my calculations..
So now i have a bunch of - - - - and 1X2X numbers inside sheet1.
Now what i want is to display a Summary of my Cells in the MAIN sheet. just the cells which contains values like 1X2X only.
A) Is this even possible to do in Excel? I've seen similar ideas in foums, Excel help, etc., but they are all limited to worksheets within a single workbook.
B) My front half logic will work if I can do the back half. But if that's not possible, is there another way to accomplish this?
I have tabs ranging from RA to DW
Also a summary sheet. As of now i have manually copied data from each tab onto summary sheet
Is there a way to automate the summary sheet so that when i enter data in each tab it gets updated automatically in summary sheet as well
Flexibility needed is:
If row is added in any sheet from RA to DW then the same should be created in summary
IF a resource is added in any tab then the same should be added in Summary.
Similary for delete too
Overall i should be able to update summary automatically when i update the tabs.
I have a problem with a macro script I need to write (unsure where to start probably). I’m using Excel 2003. In my spreadsheet I have many worksheets (90+) and I need to copy information from specific cells (the same for each sheet, but the cell range varies each month) from any identified worksheet in the spreadsheet (the specific sheets I want to copy from will differ from month to month but are given in a list.). Then paste this data in sequential order of identified worksheet but transposed into sheet Summary. In effect this is:
1.Identify the sheet name from the ListingOrder in worksheet LISTING
2.Identify the monthly range of cells
3.Copy the data (Indicator, Month, Name and Activity)
4.Go to sheet SUMMARY
5.Go to next available cell in column A
6.Paste special, transpose
7.Loop to next sheet name in the ListingOrder
8.Undertake actions 1-7 until all relevant sheets have been copied from and pasted to Summary sheet.
The end result is as shown in the Worksheet SummaryExample – no need to worry about formatting. Samole data and SummaryExample in attached spreadsheet. Sorry I can’t offer any script at present – I’ve been trying to work it out using Vlookups etc but get the feeling it would be easier via a macro.