Copy Same Range From Multiple Worksheets Onto Summary Sheet
Mar 12, 2009
I have searched for my answer but because I am new to all this I am stuggling to manipulate some of the other code that is close to what I am after..
I am trying to find a quick way of summarising data from multiple detail sheets onto a summary sheet (all within the same workbook) with the number of worksheets varying (ie: I may add or delete worksheets).
I basically want a concise summary of the other detailed sheets.
My Workbook is setup as follows:
Multiple sheets detailing each individual trade (with a summary at the bottom with the basic info I need on the summary sheet).
A summary sheet totalling the profit/ loss from all trades, costs of all trades etc (I am ok with this).
A summary sheet summarising all trades - ie each of the summaries contained on the individual trade sheets consolidated onto one sheet for quick reference:
Trade #TradePositionProfit LossHold Time
1JBHLong300030
2JBHLong250020
3JBHLong200010
1WOWShort050012
1HVNLong800015
1CLXShort500045
2CLXShort250030
3CLXShort150010
What I am struggling to get onto the summary sheet is all the individual summaries on the detail sheets. The reason for this is that each trade can have up to 3 positions: the Initial trade, Pyramid 1 & Pyramid 2. (This range is in the same location of each sheet but could be 1, 2 or 3 lines) and the number of trades I enter during the month can vary (ie the worksheet number can vary).
I don’t want to have to manually update a range, of a consolidation for example, each time I add a new trade (new worksheet) & want to view a summary.
I thought it would be easier to summaries each trade at the bottom of each trade sheet so I can pick the information up from the same spot already in the format I want it in for the summary page.
Does anyone have any suggestions on how I can get the summary to search each sheet, no matter if there is 1 trade or 50 trades & pull the summary information which is located in the same spot onto the one sheet for a quick view?
View 9 Replies
ADVERTISEMENT
Aug 12, 2009
I have an excel workbook containing 123 worksheets. Sheet1 I have titled "Summary" and I wish to copy data from the remaining sheets (2-123) into it. Each sheet is formatted in the same way, and I wish to take the data in cells E66:G130 from each worksheet and paste it into the Summary sheet (so, Sheet2's 3 columns would be pasted in cell A1, Sheet3's in D1, and so on).
I gave a couple of codes a go (this one is from a thread "Copy Data From Multiple Worksheets & Append To Single Worksheet", I tried to alter accordingly):
Sub SummurizeSheets()
Dim ws As Worksheet
Application. Screenupdating = False
Sheets("Summary").Activate
For Each ws In Worksheets
If ws. Name <> "Summary" Then
ws.Range("E66:G130").Copy
ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)
End If
Next ws
End Sub
However, I don't understand what "ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)" refers to - I am told there is an error with this line ("compile error expected =").
I also tried the Consolidate function, but had problems as well.
View 4 Replies
View Related
May 9, 2009
I have attempted to use a table of contents macro and then Hlookups to pull corresponding data from each worksheet, but haven't had success
Issue: Excel workbook contains 50+ worksheets formatted the same, with data located in the same cells. Worksheets are constantly added to the workbook so the formula needs to scan the entire workbook
How the data is organized: Subject headings are as follows: Cell A1 is "Loan ID"; A2 is labeled "Deal Name"; A3 is "Property Name"; A6 is "Loan Amount"; and E4 is "Asset Manager". Cells B1,B2, B3, B6, and F4 contain the corresponding data.
Goal: I would like to automatically pull all of this information onto a summary page (much like a table of contents, but with the subject headings running across the top of the page) and the text data running down the page. I would also like to be able to click on the property name and have it direct me to the corresponding tab<br> <br>
I have attached an example of what I am looking for, see "summary" tab for end result and other tabs as make-up of the data.
View 3 Replies
View Related
Jul 21, 2014
I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
View 6 Replies
View Related
Feb 2, 2005
I want to create a summary sheet that will lookup a particular cells value on
multiple sheets (averaging 58 sheets) in a workbook (e.g. $J$19) based upon a
cell next to it ($I$19) that will match the criteria on the summary sheet
(e.g. w1, w2, w3).
I have tried VLOOKAllSheets but when there are other similar workbooks open,
it doesn't work right.
View 14 Replies
View Related
Jan 30, 2014
I have one workbook with 6 worksheets, each sheet has a table with the same headings, different data, each sheet is named south, east,erie central south & west, how can i pull them all into one summary sheet? and have it constantly update? using the = and referencing each sheet won't work as they will grow and overlap each other?
View 9 Replies
View Related
Dec 20, 2012
I want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
View 5 Replies
View Related
Oct 6, 2009
I have a workbook that tracks pollutant emissions. The workbook could end up having up to 180 worksheets, one for each pollutant and the emission total. I have VBA to create a new sheet for each pollutant (attached) using a hidden template sheet.
The summary sheet in position 1 needs to list each pollutant worksheet on a new row, and the same 4 cells from each worksheet (id, name, value, value). I have been typing out the cell references in the summary sheet, and it gets boring [=Sheet!Cell id], [=Sheet!Cell name], etc.
Is there a way for me to copy those cells to the summary sheet when the new sheet is created?
View 6 Replies
View Related
Sep 25, 2007
I have a question about my Excel template: I have a workbook with 3 existing sheets in this order: DATA, Fronpage, Summary. In the Frontpage I have a clickable button to create a new sheet with name as Report1, Report2, etc. at each click. What I wanted is that when I click the button to output a Report sheet, say Report1, I want it also dynamically to copy and paste a range , for example r2c1 : r5c6 from the new report sheet to the Summary sheet. The pasted results from each Report in the Summary sheet should not be replaced, instead, should be appended separated by two rows. The Summary table is like a log file that keep track of certain rows of the report sheets. Could anyone give me a hand
View 5 Replies
View Related
Aug 21, 2013
Here's what I have:
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary()
Application.DisplayAlerts = False
On Error Resume Next
Sheets("Summary").Delete
Application.DisplayAlerts = True
n = Application.Worksheets.Count
[Code]...
View 4 Replies
View Related
Sep 21, 2013
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
View 4 Replies
View Related
Jul 28, 2013
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
View 5 Replies
View Related
Dec 5, 2011
I have a work book. The sheets are for different months. I also have a summary pages that calculates and number of things. How I get the summary page to look at a different work sheet without changing to many things.
OctAlice KwokCandy LeeStudents Served %77%
(=Oct!C2)0% (=Oct!D2)PM Satisfaction3.66 (=Oct!C3)2.67 (=Oct!D3)14 Day KPI85%85%
Current the formula points direcrt the the worksheet =Oct!C2
I would like to be able to change a cell that matched worksheet names and the summary automatically looks at that work sheet.
View 3 Replies
View Related
Dec 26, 2006
I have a workbook that has various number of worksheets at any time. Each worksheet has data about current employees. We can have anywhere between 20 and 50 employees at a time. When we get a new employee, we take the "template" worksheet, copy it, and rename it with the employee name. We also have a summary sheet. On the summary sheet we have the employee name in column "A" and the hire date in column "B"
Each employee sheet is set up the same since we use the template. So the employee name is in cell "A6" and the date is in "I6".
Is there a macro I can use that will update the summary page every time a worksheet is added or removed? I don't want the macro to run on its own - I want to make sure we can manually run it (after we are done entering data into the new sheet).
So, basically, what I want to do is to search for all worksheets except "template" and "summary" and take the value in cells "A6" and "I6" and paste it in the "summary" sheet in cells "A3" and "B3" respectively, and then the next values from the next sheet into "A4" and "B4" and so on and so on.
I have been experimenting with code all day, and started just trying to get the employee names copied over (cell A6) and can't do it so I haven't even tried the hire date yet (cell I6). I have tried probably 15 different codes but I guess I do not know what I am doing. The latest code I tried is....
Worksheets("Summary").Activate
FirstCell = Worksheets("Summary").Range("A3")
For Each Worksheet In Sheets
If Worksheet.Name "Summary" Then
ActiveSheet.Range("A6").Copy Destination:=Worksheets("Summary").Range(FirstCell + 1, 0)
End If
Next Worksheet
End Sub
It would be cool too if after all the values have been pasted into the "summary" sheet if I could sort alphabetically, but I don't want to push my luck.
View 9 Replies
View Related
Jan 11, 2010
I have 9 sheets of sales data, some with over 50,000 records. I need a way to present this information in another worksheet so I can bring up just the data based on individual brands. I understand a pivot table is needed however I cannot see how to gather data from multiple worksheets.
For example:
I need to look at all the different sales for Product A, which appears in multiple worksheets. Product A is broken down to store-level, with records for number of sales in each store, one record for units and one for value (for the same store and product). Is there a way I can get the data for all of Product A in one worksheet so I can then easily add the totals across all stores by both units and value?
E.g.
Store 1 - Product A - 10 units
Store 1 - Product A - £20
Store 2 - Product A - 7 units
Store 2 - Product A - £14
View 2 Replies
View Related
Feb 6, 2014
I am trying to create one Excel file for accounting purposes. Within this file I want to create a worksheet for each customer I have in my store. On this sheet I want to list my costs and their payments. I would like to then create a summary sheet which adds all of the individual customer sheets together. Now this is easy to do manually, but what I need to create is an automation (Macro I assume) that does the following:
I add a new sheet and name it after the new customer. The Macro automatically adds that sheet into the formula for the summary sheet. This way may secretary only needs to activate the macro, which will copy a sheet and automatically update the summary page to include this newly copied sheet and all its information. Now the process for automating projected costs and profits is very easy and requires nothing more but to activate the macro.
View 14 Replies
View Related
Feb 12, 2008
In the attached WB I'm looking for some formula (for cells A6:C6 in the brown table) to summaries cells A2, in the different sheets, as per a criteria, located in cells A5:C5 in the brown table.
The criterias (A, B, and C) should check cells A1 of each sheet.
I would also like to know how to handle sheets named A, B, C, D, E instead of Numbers in such formulas.
So far for my question.
In addition - I tried some " Array Formulas" in order to understand the concept of solving such a problem - and came up with some "weird" results as you will see in the attached WB. Any additional word will be superfluous...
View 9 Replies
View Related
Sep 26, 2007
I am using following code to copy a range from one worksheet to multiple worksheet.
I used both the option to paste the copied content i.e. ActiveSheet.Paste and Selection.PasteSpecial Paste. However in both cases getting error message 'Paste Method Of WorkSheet Class Failed'.
find any error here
Sub CopyList()
Application.CutCopyMode = True
Counter = Sheets.Count
For i = 3 To Counter
Sheets("Summary").Select
View 4 Replies
View Related
Feb 3, 2013
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
View 2 Replies
View Related
Apr 17, 2013
I am using Multiple worksheets ( 30 to 35 ) of same format to calculate Individual scores of an event. Each sheet contains Participant Name in C4 and Score in E 21.
Macro to provide a summary sheet which returns C4 & E21 in all the sheets..
The score in E21 is calculated thru another macro done with excel recording feature..
View 4 Replies
View Related
Apr 30, 2014
I'm trying to create a database which can analyze data for my thesis.
The idea is the following:
I have all data saved on multiple work sheets in one workbook.
I would like to use the find function and when I search for specific data this is either summarized in a new sheet or else can be printed.
View 1 Replies
View Related
Apr 25, 2014
I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.
View 9 Replies
View Related
Sep 14, 2008
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
View 9 Replies
View Related
Aug 22, 2009
I am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then
View 9 Replies
View Related
Dec 23, 2013
excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
View 2 Replies
View Related
Apr 2, 2014
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
View 12 Replies
View Related
Sep 22, 2009
I have a problem with a macro script I need to write (unsure where to start probably). I’m using Excel 2003. In my spreadsheet I have many worksheets (90+) and I need to copy information from specific cells (the same for each sheet, but the cell range varies each month) from any identified worksheet in the spreadsheet (the specific sheets I want to copy from will differ from month to month but are given in a list.). Then paste this data in sequential order of identified worksheet but transposed into sheet Summary. In effect this is:
1.Identify the sheet name from the ListingOrder in worksheet LISTING
2.Identify the monthly range of cells
3.Copy the data (Indicator, Month, Name and Activity)
4.Go to sheet SUMMARY
5.Go to next available cell in column A
6.Paste special, transpose
7.Loop to next sheet name in the ListingOrder
8.Undertake actions 1-7 until all relevant sheets have been copied from and pasted to Summary sheet.
The end result is as shown in the Worksheet SummaryExample – no need to worry about formatting. Samole data and SummaryExample in attached spreadsheet. Sorry I can’t offer any script at present – I’ve been trying to work it out using Vlookups etc but get the feeling it would be easier via a macro.
View 2 Replies
View Related
May 8, 2013
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
View 6 Replies
View Related
Sep 18, 2007
I'm trying to create a summary sheet as a second sheet in an XL workbook. I need to pull data from another sheet in the workbook, but only from a date range entered on the second sheet.
View 11 Replies
View Related
Mar 4, 2014
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
View 3 Replies
View Related
