A) Is this even possible to do in Excel? I've seen similar ideas in foums, Excel help, etc., but they are all limited to worksheets within a single workbook.
B) My front half logic will work if I can do the back half. But if that's not possible, is there another way to accomplish this?
I have created a template workbook for individuals who work on different sites. The spreadsheets used by each individual have the same headers. The sheets all sit in the same folder in dropbox.
I am wanting to produce a summary workbook within the dropbox folder that automatically populates when an individual updates their workbook.
I have attached mock example of the individuals worksheet for your information.
The questions that I have are as follows:
1. Is it better within an individuals workbook that they record their activity all on one sheet as opposed to having a spreadsheet per months activity? It seems tidier to have a sheet per month but does this make it more difficult to produce a summary workbook?
2. The individual is required to record a patients individual drugs on separate lines but they need to record a unique identifier, age, *** and month worked. Do they need to record all this for each line of drug or is there an easier way?
3. How should the summary sheet be produced - pivot table or sheet with formulas linked to the individuals workbooks?
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
I have data like this:
A B C
1 INC0123 00:00 00:12
2 INC0123 00:13 00:27
3 INC0123 00:28 00:42
4 INC0127 00:00 00:20
5 INC0127 00:21 00:48
6 INC0128 00:00 00:22
etc
and what I would like is a summary sheet that looks like this
A B C
1 INC0123 00:00 00:42
2 INC0127 00:00 00:48
3 INC0128 00:00 00:22
etc
I'm looking to create a summary sheet of all data consolidated to one tab.
On the attached workbook, I want to pull all of the data from the monthly tabs and consolidate it all to the 2012 Totals tab.
How to only pull the nonblank rows, and ignore the headers.
I would like to be able to avoid using a macro for this, if at all possible. I would like for the summary to update dynamically whenever new data is added to any of the monthly tabs.
Link to spreadsheet
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
View 6 Replies View RelatedI have a file which has a number of sheets each relating to a different project. Each project has a line for each milestone starting at the same row but each project has a different number of milestones.
I would like to create a summary sheet that either pulls through each row relating to a milestone from each project sheet or ideally each milestone that relates to a certain month from each project sheet (each milestone includes a completion date).
I'm going to try to explain this as accurately as possible. This is my first post, and I'm seriously struggling with VBA, but i'm confident that someone out ther will have done this before.
I have a single workbook which has a single datasheet, and further sheets representing different months of the year.
Sheet 1 ("Data") contains the following columns and data:
DateStart MileageEnd MileageBusiness TripBusiness Mileage
01/05/2008013 get 13
02/05/200813260
03/05/200826100 euro 74
04/05/2008100113 adf 13
05/05/20081131130
06/05/20081131130
07/05/20081131238 alex begg1125
08/05/2008123812510
09/05/200812511288 service 37
10/05/2008128812980
11/05/2008129813110
12/05/2008131113780
13/05/2008137814000
14/05/2008140014560
15/05/200814561490.10
I then have a series of Summary sheets which are supposed to summarise the data on this single data sheetl. But this is where I have issues.
Basically, from the list of data above (running from 1st may 2008 - 31st December 2008), I want to pull out, per month all of the trips in that month. So for May (shown above) I need the date, business trip name, and the business mileage where the business trip name <> "".
To compound the issue, the columns that these are moving into are columns 1, 2 and 6 in the summary spreadsheet.
I have used some example code from cpearsons website to give me a list of nonblank cells in the Business Trip column, and this has worked, but I can't pull the other two columns out effectively.
I want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
I'm trying to write a formula to take data from the same cell in each of 50+ sheets and put it into a summary sheet:
On each sheet i have the total for that sheet in a cell, H11
in the summary sheet i want to list these horizontally, so total of sheet 1 into the summary sheet in D5, sheet 2 in E5, sheet 3 in F5 and so on...
Is there a way to write and copy a formula or will I have to manually amend the formula for each sheet ref?
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer
Dim counter2 As Integer
Dim id As Double
Dim id2 As Double
Dim palletnum As Integer
ActiveSheet. Name = "Pallet Detail"
Sheets.Add
ActiveSheet.Name = "Pallet Summary"
Sheets("Pallet Detail").Select
How to I add data to an existing summary sheet, in a specific cells, from an unknown number of sheets?
Tickets will be generated with unknown names.
I want the summary sheet to be able pull the ticket numbers into the top row of the summary sheet, to an undefined number of sheets.
As well I would like the summary sheet to pull the job# on each ticket and the hours for each person on each ticket.
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
I have been asked to create grand summary workbook that basically copy and paste from a few workbooks in different folders location in a network drive in this grand summary. The sheet to copy from these other workbooks is named as "summary" and the location and filenames are as follow:
P:Section 1RegisterNorth.xls,
P:Section 2RegisterSouth.xls,
P:SectionRegisterEast.xls
The data can be found from A7 to R7 downwards in the "Summary" sheet tab in each of the workbook above.
The data are updated every week and as such I hope to have a macro create to first clear the old data and update the new data.
Im currently working on making a workbook as a summary/join of several workbooks. All cells are formatted in the same way, and only Row 1 is the same in all workbooks.
How to combine several excel files into one file?
My issue is that when i run this macro, the rows are overwritten for every workbook runned through.
I end up with only the contents of the last copied workbook.
I guess my EndRow is wrong, or the copy function, since the offset is not set properly.
Code:
Sub ExtractData()Dim basebook As Workbook
Dim mybook As Workbook
Dim FNames As String
Dim MyPath As String
Dim SaveDriveDir As String
Dim Cnum As Integer
[code].....
I have a set of workbooks, with multiple sheets within each which I receive each month from field units. The formats are identical.
What I want to do is to extract data from one column on one specific sheet within each workbook to a summary sheet on a new workbook. In the snapshot below, I would like to collect data from the "Actual" column (in yellow) and then paste it on a summary sheet.
Monthly reportingEntity 13. Risk reportingJanuaryMarket Risks - LoansJanuaryTargetActualVarNumber of competitors 110%Market share 1%1%0%Ranking in market 110%Concentration of portfolio – region-wise (number)1%1%0%Concentration of portfolio – region-wise (value)1%1%0%Market growth rate 1%1%0%Inflation rate 1%1%0%
This would appear in a new summary worksheet as below: (the cell labelled "Entity 1" would then appear as the column header in the summary sheet.)
Monthly reporting - summary sheet3. Risk reportingTarget rangeEntity 1Entity 2Entity 3Market Risks - LoansActualActualActualNumber of competitors 1Market share 1%Ranking in market 1Concentration of portfolio – region-wise (number)1%Concentration of portfolio – region-wise (value)1%Market growth rate 1%Inflation rate 1%
The steps I imagine are:
1. Open all workbooks in a specified folder (folder name upon prompt)
2. Search each workbook for a sheet titled "Risk Reporting"
3. Copy the specified cell (for the column header) and the specified column into a new sheet in a new workbook
4. Move on to fill up the next column, and so on ...
Also is there a way to order the copying so that the columns always line up in a specified order? (e.g. Entity 1, followed by 2, followed by 3 ...). One way I guess is to fix the column headers in my summary sheet, and then fetch the data from the corresponding worksheet, by matching the names.
I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
I am working with 3 different worksheets. Lets say they are named A, B, and C and for simplicity, and let us say they are all stored in C:worksheets (they are actually located on different network drives). I would like for excel to open and extract data from the Machine_List page in each workbook. Then output it to the current sheet that I am working with and just add the data to the next available empty cell on row A. They are also headers on each sheet so I would like to delete it or start copy from cell A2.
View 9 Replies View RelatedI have an excel sheet which has 70 sheets in it...All of them are numbered but not in a sequential manner (eg : 210,211,201,202,215 etc..).The numbering is nothing but the sales order number....
All the sheets have same data (i.e Column A contains Product Sold, Column B contains Sale Value)...The thing is i want to consolidate all the data in sales order number wise. i.e.
Column A Column B
201 $200
202 $300
203 $450
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
View 3 Replies View RelatedI need to import the data from a specific sheet (same named sheet on all closed workbooks) to a sheet in an open workbook. All the columns are identical in every workbook but the number of rows is variable, so the data from each subsequent workbook must be appended to the end of the current data.
Whenever a button is pressed, this macro will clear the sheet, then import the data starting in A3. The workbooks are in different folders but they all have the same name, so some sort of explorer window will probably be needed to actually select each file.
We have an equipment sheet that our sales team fills out when quoting customers. The sheet has everything from the items Brand, Model Number, Description of item, cost, MSRP, ect... on it followed with a QTY that is needed. Now one of my jobs is to go through the sheet and create a summary page of everything that is selected and place certain data onto this "Summary Page". This is what I am trying to do:
When a QTY of greater than 1 is selected on the "Equipment" page it will autopopulate the "Summary" page with certain data, mainly the description of the item followed by the QTY ordered. Let me see if I can do an example below
Say I have this equipment list below:
'EQUIPMENT' Sheet
Example.png
Now since a QTY greater than 1 has been placed into column E2:E5 I would like to populate data from the corresponding B, C & D column into the 'Summary' sheet
'Summary' Sheet
1 HD51 I/O, Rugged Dome, HiRes, VF Lens
3 HD73 IR, I/O, Rugged Dome, HiRes, VF Lens
I hope this makes since. If I am able to do this it would save me countless hours of CTRL+V CTRL+C work, that and its hard to catch every value when you have over 3,000 items on a equipment sheet.
i want to delete any sheet after sheet called "Summary"
View 1 Replies View RelatedI have a summary sheet which shows a range of information to give a full overview of the main information from individual feature forms.
At present, the manager is manually linking the cells from this sheet from the individual feature sheets with the normal =A1 kind of formula.
Is there an easier way to do this?
The solution would need to insert a new row each time in the summary sheet and pull out about five key bits of information from the feature sheet.
I have a workbook that has a sheet called CustInvData, this sheet contains 4,421 rows of invoice transaction data for 178 customers starting on row 2 (headers on row 1). I need to split the transaction data for each customer out into a workbook template based on the customer name in column A. I need each workbook named by the customer name along with a month and year (example: Bellsouth-0911.xls), this should create 178 unique workbooks. And since we sometimes have to go back and rerun invoices for previous months, I'll need to control the month and year manually in the code.
The parsed data needs to be copied to a pre-formatted invoice template. This template has 2 sheets, Sheet1 is called 'Product Summary', this is a table that uses VLOOKUP functions to read the data in Sheet2 called 'Product Details', this is the sheet the parsed data needs to be copied to for each customer invoice. The 'Product Details' sheet has formatted rows 1 thru 11, row 11 being the header row for the data from CustInvData to be copied. So the parsed data needs to start at row 12.
Last, once the data has been copied into the 'Product Details' sheet, I need the data to be SubTotaled at each change in column J (Product) and use the 'Sum' function to add a Subtotal in column L (Retail Price) for each unique product category.
Example data below, I've simplified it (the actual data array spans from columns A to Y)
Customer NameProduct Retail Price
ABC CompanyAVMPCR10
ABC CompanyAVMPCA15
[Code]....
I'm a bit of a novice with macros, but I know Excel pretty well.
Using Excel 2007 running on Windows Vista
I have a summary sheet with a numerous data sheets to the left of it in a single workbook. Every time I add a new data sheet I have to type it's name on the summary sheet. How can I automate this?
View 9 Replies View RelatedI’ve had a look through the forum and on some of the guides/FAQ but thanks to my ineptitude I have been unable to adapt any of the examples to my specific situation.
What I’m after is this: I need to create a summary sheet for a work book with a variable number of tabs. All I need the summary sheet to do is to make a table of the name of the tab and then cell A17. How would I go about doing this and is it possible to save this macro to my machine/all workbooks instead of just the one?
