What is the trick for entering the following equation?
=SUMPRODUCT(LOOKUP(B3:F3,{0,0;"A",4;"B",3;"C",2;"D",1;"U",0}))/MAX(1,COUNTA(B3:F3))
When I enter this equation, it yields an #N/A error
Perhaps the { is being entered incorrectly ?
How would I adjust this so that the E in E$1 refernces the value of the i variable? ...
View 9 Replies View Relatedcould provide me a loop function in VBA for these calcultions.
Cell A1*E1 + B1*F1 + C1*G1
Cell A2*E1 + B2*F1 + C2*G1
......till
CellA100*E1 + B100*F1 + C100 * G1
These are the calculations for E1-G1.
The process must be repeated till E50-G50
So the second step is:
Cell A1*E2 + B1*F2 + C1*G2
Cell A2*E2 + B2*F2 + C2*G2
......till
CellA100*E2 + B100*F2 + C100 * G2
I have searched and found a few postings for #NA errors
The formula I am using is SUMPRODUCT:
=(SUMPRODUCT(('On Premise Activity Tracker'!D19:D26="MAY")*('On Premise Activity Tracker'!H19:H38='On Premise Activity Tracker'!AG32)))
I am trying to count up the number of times 'On Premise Activity Tracker'!AG32 was used from 'On Premise Activity Tracker'!H19:H38 only if it was in the month of MAY.
This is a working document that is going to track information over a years time. Therefore, I have noticed that the formula only works when there are values in the cells. However, when I increase the range to the whole workbook I get the #N/A error because I do not have data in some of those cells.
I'm using this sumproduct and it works until a cell has text.
=SUMPRODUCT(($C7:$C16=$C$2)*($D7:F16))
I've tried =SUMPRODUCT(--($C7:$C16=$C$2),($D7:F16)) but got the #Value! error because of the D7:F16 range. If I changed it to become F7:F16, then it works. But...my original formula adds all values giving me a YTD result. If I changed the range to be only F7:F16, then all I get is just that column's data. I have January to December's data across the columns from D to F. Any ideas on keeping my D to F range? I've tried Transpose but it didn't work either.
I have a weird problem with some cells calculating (for example) =sumproduct(bundleNoNRP, bundleNoQTY). There are a number of cells with similar formulas calcutating with named ranges, and they all display #Value (a value of the wrong data type is used in this formula).
Both these ranges are set up via a VB program.
If i just seperately on the sheet do the sum of either of these ranges it works fine.
What could be going wrong? Is there some way of checking whats in the ranges? I cant see why the data type would be wrong if I can do sum calcs ok..Is there some rule which would mean the calculation wouldn't work anymore? This is part of a much larger VBA project so I hope I have provided enough information.
I am using the SUMPRODUCT formula as a SUMIF with multiple conditions in the following format:
SUMPRODUCT(-(Range1=CellReference),-(Range2>0),Range3/Range2)
THis works with or without the 2nd condtion, but I thouht the "greater than 0" bit would eliminate the inclusion of 0's; however, the same #DIV/0 error occurs with or w/out that ">0" condtion as the 1st OR 2nd argument.
I speculated that b/c the final argument was dividing each paid of cells in either range instead of a typical sum, this caused the divisor error.
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
I'm trying to sum cells in a column that meet the following criteria: If the first character of the cell = "V" then sum the last two characters in the same cell. I.e., if A4 = "V12" and A6 = "V10", then I need the formula to return the total 22. All other cells, whether blank or starting with a different letter need to be ignored. My attempts have failed, including this last one that returns a #VALUE error.
=SUMPRODUCT(LEFT(A1:A10,1)="V")*(MID(A1:A10,2,2))
I have the following two columns in A1:B4 (customer # followed by percentage)
1 0.5
2 0.9
3 0.8
4 #DIV/0!
In column D i have a list of the customer #s. In column E i try to identify if the customer in column D have a percentage >=.8.
I am using the below formula, but getting a #DIV/0! error due to the error in cell B4, which i am not allowed to change using an iferror formula.
=SUMPRODUCT(--(A1:A4=D2),--(B1:B4>=0.8))
Is there a way to get around this using sumproduct or any other method to determine if the customer in D has a percentage >= 80%?
whats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".
View 14 Replies View RelatedI have cobbled together some code that I hoped would do the following:
Sort data
Copy all data from one person and put it on a sheet
Create a pivot on that data
populate another sheet based on that persons data
Save as a PDF
Clear the data and start again for the next employee
I have copied this from other macros I have used in the past. Up until now the parts I have been working on have been ok. however when I try and run it now I get a "Loop Without Do" error. I really can't figure out why.
I'm trying to do a for each loop in a row, I've tried to drill it down to be as simple as possible, but I keep getting the Run-time error '424': Object Required
I've tried to make it simple, with just inserting a 1 into the cells, still get the error.
Code:
Dim firstRow As Range
Dim rCell As Range
Set firsRow = Worksheets("MAIN").Range("F3", "AG3")
For Each rCell In firstRow 'error shows here
rCell.Value = 1
Next rCell
I need my macros to search for the word "Cancel" in columns "T". Once found, I need the macros to make that entire row a certain pattern ( .Pattern = xlGray16)
There will be other wording in these cells that contain "Cancel" or "Cancelled".
A compile error keeps occurring. It says "Ambiguous name detected: FormatCell"..
Sub DoCancelCells()
Dim strSearchString As String
Dim wksSheet As Worksheet
Dim rngSearchRange As Range
Dim intSearchCount As Integer
I know it has something to do with the way I am trying to complete the loop.
I have tried next i, I have tried if's instead of the do until but can't get it to work.
I want it to cycle through the x and if a value is found then paste into the corresponding i row. If the x value is blank then exit the loop.
I've got the following code which opens/gets the excel files from a specified directory and imports them into an open workbook. I've added a GoTo Error before my loop which checks if there are any files in the directory and shows an error message if it's the case. Problem is since the loop goes on till there are no more files in the directory, it goes back to the error. How to change that ?
View 3 Replies View RelatedI have created a macro to calculate data and add it to sheets over sheet 3. It has to do this for any number of sheets above sheet 3.
Below is the code i have created i am just getting an error at runtime which i dont know how to resolve or what i have done wrong
VBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True
[Code]....
My current code opens a file ("Report01.CSV") from the directories in column A (one at a time), and copies data into sheet 2.
The problem is that sometimes there is no ("Report01.CSV") file in one or more of the directories.
What I would like to add is an error handler that would remove the directory (delete that cell) that caused the error and continue with the loop. I.e. resume importing data from the other directories.
CODE:
Dim wrkMyWorkBook As Workbook
Dim lngRow As Long: lngRow = 1
Dim lngColumn As Long: lngColumn = 2
Do Until Sheets("Sheet1").Range("A" & lngRow).Value = vbNullString
Set wrkMyWorkBook = Workbooks.Open(Filename:=Sheets("Sheet1").Range("A" & lngRow).Value & "" & "REPORT01.CSV")
lngRow = lngRow + 1
[Code] ......
I'm trying to create a simply loop for an easy task of copying and then pasting a formula into other cells. Basically I'm trying to get this script to run until there is no more "slsperson" references to go to.
Sub z_Paste_Sales_Formula()
Dim i As Long
Dim icolumn As Integer
icolumn = 4
Cells(3, icolumn).Select
Selection.Copy
i = 1
Do
Application.Goto Reference:="slsperson" & i
ActiveCell.Offset(1, 0).Select
sls_row = ActiveCell.Row
ActiveCell.Offset(1, 0).Select
gp_row = ActiveCell.Row
Cells(sls_row, icolumn).Select
ActiveSheet.Paste
Number = i + 1
Loop Until Application.Goto Reference:="slsperson" & number = error
End Sub
I'm receiving Error 1004 at these 2 lines:
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
VB:
Option Explicit
Private Sub CommandButton1_Click()
'This code pulls only the data we need from Sheet1 and puts it on Sheet6[code]....
This is the code I am using, I can not remember where I got it from.
Code:
Sub PDF()
' Saves marked sheets as PDF file.
Const PDF_path = "c:
eports"
Dim Snr As Integer
Dim Name As String
'Process all sheets in workbook
[code]....
This outputs all worksheets that have a specific value for A1, "Y".
My problem is it always prints exactly one too many, an extra copy. I think it may have to do with a broken loop?
I have written a piece of code that sets the print area for the cells whose formulas are not blank as the result of the if formulas in them. The code works across the page.
In it's current state the loop should repeat four times as that is the number of non-blank cells. The loop I have is:
Code:
Do While CollSheet.Offset(0, i).Value ""
i = i + 1
Loop
This however, gets as far as i = 2 before completing the loop. To test why I wrote the following piece of code which loops the four times it is meant to. The trouble is I can't work why they aren't returning the same value as to my knowledge, they do the same thing. If I had to guess I think it's something to do with the cell being a merged cell.
Code:
Do While ActiveCell.Offset(0, 1).Value ""
ActiveCell.Offset(0, 1).Select
Loop
I am trying to run for_each_loop to in a module run an activity on other excel file.
Other excel file is having 8 sheets and loop is working fine till 4th. but when loop goes to 5th sheet it says Application defined or object defined error. I am confused because i have defined the objestSh as worksheet in the beginning.
This line of code creating problem.
Sh.Range("A2").CurrentRegion.SpecialCells(xlCellTypeVisible).Offset(1, 0).Copy
I am trying to fill an array with only a few values within a loop (when XspacingA is 0.5, add the value of the Line to the array) and keep getting the error "Subscript out of range".
View 3 Replies View RelatedI have some code that is working great except that it throws up an error on the last run through because it doesn't find any more rows to delete. I've tried "On Error GoTo" but it doesn't catch it. It seemed to work on my home computer which is running Excel 2010 but then on Excel 2007 I get the debug screen and I don't want that to show up for other users that I share the code with.
Sub DeleteHeaders()
Dim lastrow As Integer
lastrow = ActiveSheet.Cells(Rows.Count, "A").End(xlUp).row
[Code]....
