Sumproduct Gives #N/A! Error
Jan 27, 2007
I have searched and found a few postings for #NA errors
The formula I am using is SUMPRODUCT:
=(SUMPRODUCT(('On Premise Activity Tracker'!D19:D26="MAY")*('On Premise Activity Tracker'!H19:H38='On Premise Activity Tracker'!AG32)))
I am trying to count up the number of times 'On Premise Activity Tracker'!AG32 was used from 'On Premise Activity Tracker'!H19:H38 only if it was in the month of MAY.
This is a working document that is going to track information over a years time. Therefore, I have noticed that the formula only works when there are values in the cells. However, when I increase the range to the whole workbook I get the #N/A error because I do not have data in some of those cells.
View 3 Replies
ADVERTISEMENT
Feb 26, 2007
I'm using this sumproduct and it works until a cell has text.
=SUMPRODUCT(($C7:$C16=$C$2)*($D7:F16))
I've tried =SUMPRODUCT(--($C7:$C16=$C$2),($D7:F16)) but got the #Value! error because of the D7:F16 range. If I changed it to become F7:F16, then it works. But...my original formula adds all values giving me a YTD result. If I changed the range to be only F7:F16, then all I get is just that column's data. I have January to December's data across the columns from D to F. Any ideas on keeping my D to F range? I've tried Transpose but it didn't work either.
View 9 Replies
View Related
Mar 9, 2007
What is the trick for entering the following equation?
=SUMPRODUCT(LOOKUP(B3:F3,{0,0;"A",4;"B",3;"C",2;"D",1;"U",0}))/MAX(1,COUNTA(B3:F3))
When I enter this equation, it yields an #N/A error
Perhaps the { is being entered incorrectly ?
View 9 Replies
View Related
Oct 2, 2007
I have a weird problem with some cells calculating (for example) =sumproduct(bundleNoNRP, bundleNoQTY). There are a number of cells with similar formulas calcutating with named ranges, and they all display #Value (a value of the wrong data type is used in this formula).
Both these ranges are set up via a VB program.
If i just seperately on the sheet do the sum of either of these ranges it works fine.
What could be going wrong? Is there some way of checking whats in the ranges? I cant see why the data type would be wrong if I can do sum calcs ok..Is there some rule which would mean the calculation wouldn't work anymore? This is part of a much larger VBA project so I hope I have provided enough information.
View 9 Replies
View Related
Jun 17, 2009
I am using the SUMPRODUCT formula as a SUMIF with multiple conditions in the following format:
SUMPRODUCT(-(Range1=CellReference),-(Range2>0),Range3/Range2)
THis works with or without the 2nd condtion, but I thouht the "greater than 0" bit would eliminate the inclusion of 0's; however, the same #DIV/0 error occurs with or w/out that ">0" condtion as the 1st OR 2nd argument.
I speculated that b/c the final argument was dividing each paid of cells in either range instead of a typical sum, this caused the divisor error.
View 9 Replies
View Related
Dec 28, 2009
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
View 9 Replies
View Related
Jul 30, 2007
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
View 9 Replies
View Related
Feb 12, 2009
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
View 7 Replies
View Related
Jan 27, 2007
I'm trying to sum cells in a column that meet the following criteria: If the first character of the cell = "V" then sum the last two characters in the same cell. I.e., if A4 = "V12" and A6 = "V10", then I need the formula to return the total 22. All other cells, whether blank or starting with a different letter need to be ignored. My attempts have failed, including this last one that returns a #VALUE error.
=SUMPRODUCT(LEFT(A1:A10,1)="V")*(MID(A1:A10,2,2))
View 7 Replies
View Related
Jun 6, 2014
I have the following two columns in A1:B4 (customer # followed by percentage)
1 0.5
2 0.9
3 0.8
4 #DIV/0!
In column D i have a list of the customer #s. In column E i try to identify if the customer in column D have a percentage >=.8.
I am using the below formula, but getting a #DIV/0! error due to the error in cell B4, which i am not allowed to change using an iferror formula.
=SUMPRODUCT(--(A1:A4=D2),--(B1:B4>=0.8))
Is there a way to get around this using sumproduct or any other method to determine if the customer in D has a percentage >= 80%?
View 2 Replies
View Related
Sep 26, 2006
whats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
View 6 Replies
View Related
May 29, 2014
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
View 8 Replies
View Related
Nov 9, 2009
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies
View Related
Apr 1, 2013
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
View 2 Replies
View Related
Jul 2, 2006
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
View 6 Replies
View Related
Feb 7, 2007
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
View 6 Replies
View Related
Apr 26, 2006
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
View 2 Replies
View Related
Sep 12, 2012
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies
View Related
Oct 8, 2008
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
View 7 Replies
View Related
May 20, 2009
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies
View Related
Apr 13, 2006
whether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
View 3 Replies
View Related
May 3, 2006
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
View 2 Replies
View Related
Dec 19, 2006
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
View 7 Replies
View Related
Apr 27, 2007
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies
View Related
Oct 20, 2006
I have a very simple spreadsheet that generates a "backing page" for items to be physically pasted to (essentially nothing more than printing a header). I have the following code under "This Workbook" to avoid being prompted to save changes when closing, as this spreadsheet is just a template and changes should not be saved...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code does as is intended, but, if any other spreadsheets are open at the same time, I get an error message pop-up saying "EXCEL has encountered an error - an error log has been generated"... Excel then shuts down. So, first question; where should I look for the error log?
View 2 Replies
View Related
May 17, 2014
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
View 4 Replies
View Related
Aug 19, 2009
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
View 13 Replies
View Related
Feb 2, 2010
I imported some data from an MDB file while working at home. created a macro to that effect. and it works fine at my home PC. but when i try t execute this macro on another PC or work place, then it gives error #13. i dont understand why. something is wrong with the code. i think it is the "WITH" code for query tables connection giving error ....
View 9 Replies
View Related
Oct 29, 2009
I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies
View Related
Feb 1, 2010
"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
View 9 Replies
View Related
