Sumproduct Formula Returns #VALUE! Error
Jan 27, 2007
I'm trying to sum cells in a column that meet the following criteria: If the first character of the cell = "V" then sum the last two characters in the same cell. I.e., if A4 = "V12" and A6 = "V10", then I need the formula to return the total 22. All other cells, whether blank or starting with a different letter need to be ignored. My attempts have failed, including this last one that returns a #VALUE error.
=SUMPRODUCT(LEFT(A1:A10,1)="V")*(MID(A1:A10,2,2))
View 7 Replies
ADVERTISEMENT
Feb 12, 2009
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
View 7 Replies
View Related
Sep 26, 2006
whats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
View 6 Replies
View Related
Jul 30, 2007
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
View 9 Replies
View Related
May 20, 2006
Some reason my sumproduct formula returns #Value!
=SUMPRODUCT((Data_2005!$A$2:$A$170=A$2)*(Data_2005!$F$2:$F$170=$A5)*(Data_2005!$S$2:$S$170))
wb is attached (stripped down for upload)
View 2 Replies
View Related
Jan 10, 2007
I'm using the formula below to count the distinct number of values in the range, many values are repeated so this formula only counts each one once, it works sometimes. For some reason I get a #Div/0 error once in a while.
The entire range might not always have a value, when I get the error if I add text to the remaining cells of the range the error is cleared.
I do not want to use a If (iserr(myformula),0,myformula)) because there are still values that need to be counted even if the range is not totally populated.
=SUMPRODUCT((B16:B1500"")/COUNTIF(B16:B1500,B16:B1500&""))
View 9 Replies
View Related
Jan 30, 2013
I have three different values in three different columns and I want to find the maximum amongst the 3 values.
A1 B1 C1
100 50 40
in D1 I have written a formula
=MAX(A1, B1, C1)
But it is returning an error saying formula you typed contains an error
View 9 Replies
View Related
Dec 31, 2007
I am still haveing problems with my sum product I'm trying to total Row E below, I know I can do this with sumif but I was trying sumproduct to read when the file was closed.
Manchester United .......
View 9 Replies
View Related
Nov 9, 2006
I want to use a dynamice range within a SUMPRODUCT, at the moment it looks like this but displays a bit FAT #N/A ....
View 9 Replies
View Related
Apr 29, 2009
this formula works but returns #N/A when the result is false, how can i get rid of N/A but replace with 0.00 even though i have 0.00 as false
=IF(VLOOKUP(A10,Down!$F:$H,3,0)="No",SUMPRODUCT(($A10=Downloads!$F$7:$F$3823)*(CT!E$9=Downloads!$A$7:$A$3823),Down!$D$7:$D$3823),"0.00")
View 9 Replies
View Related
Apr 21, 2007
I'm a big user of sumproduct but i have tried many variations on the following
=SUMPRODUCT((R9:R14="Sales Revenue")*(S9:S14)) without success.
If the data is clean ie does not contain # div/0 then i can get a fine result.
With a #div/0 then the result is #div/0. Can someone please tell me how to exclude #div/0 from the calculation please. I have searched several boards and cannot find an answer, but i'm sure its simple.
View 5 Replies
View Related
Aug 12, 2008
I’m using sumproduct to count the occurrences in a column based on 2 criteria. The formula is:
=SUMPRODUCT((D6='[BillPaymentTransactions.xls]2+ per Day'!$F$2:$F$4144)*('Exception Region V2'!$G$6='[BillPaymentTransactions.xls]2+ per Day'!$B$2:$B$4144)*('[BillPaymentTransactions.xls]2+ per Day'!$L$2:$L$4144>0))
The formula works when the array is less than about 3150 rows but goes into error when I use 4144 row range.
I am doing something dumb or does Excel not handle more than 3150 rows for the sumproduct function?
View 9 Replies
View Related
Sep 22, 2006
My SUMPRODUCT formula is returning 0 instead of expected results
=IF(ISERROR(SUMPRODUCT((WOR_Data!$A$2:$A$429=$A7)*(WOR_Data!$E$2:$E$429=$L7)*(WOR_Data!$K$2:$K$42))),0,SUMPRODUCT((WOR_Data!$A$2:$A$429=$A7)*(WOR_Data!$E$2:$E$429=$L7)*(WOR_Data!$K$2:$K$42)))
I have verified that all criteria match criterion for spelling, case, length(trailing spaces). All fine. First comparison is unit, second comparison is account description, 3rd argument of course column to be summed.
If I take out the error handler, I receive #VALUE! error
View 9 Replies
View Related
Jan 8, 2007
I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies
View Related
Jul 31, 2008
I have this code that only returns a #NAME? error. I'd love it if someone could take a look and let me know what you think might be going on. If it factors into it, D1:D4 each contain one of the following: USD, AUD, GBP, MX and E1:E4 contain the corresponding exchange rate. Also, J7:AJ41 contain a function that returns a number. Let me know if you need more information. I just can't figure why this is not working.
Sub newtabs()
Dim x As Range
Dim Curr As String
Dim Rate As Double
For Each x In Sheets("Cash Flow Detail - WkCount").Range("D1:D4")
Curr = x.Value
Rate = x.Offset(0, 1).Value
Sheets("Cash Flow Detail - WkCount").Select
Sheets("Cash Flow Detail - WkCount").Copy After:=Sheets(2)
Sheets("Cash Flow Detail - WkCount (2)").Name = Curr
Cells(7, 10).Select
ActiveCell.FormulaR1C1 = "=IF(activecell.offset(RC7)=" & Curr & ",('Cash Flow Detail - WkCount'!RC*" & Rate & "),0)"
Selection.Copy
ActiveCell.Range("a1:aa35").Select
ActiveSheet.Paste
Next
End Sub
View 9 Replies
View Related
Oct 28, 2006
I have a sheet that uses vlookup when the lookup returns #na error how can i conditional format these cells to so text is same as background
View 9 Replies
View Related
Nov 12, 2006
My formula =IF(OR( FIND("Bugs",E2),FIND("Daffy",E2)),"/wkly",0). Always returns #VALUE! error. I can understand if neither value occurs in the string, what confounds me is if one of the two does occur in the string If I shorten to
=IF(FIND("Bugs",E2),"/wkly",0)
Then the expected output is returned
View 2 Replies
View Related
Sep 30, 2007
Is there a way in which you can create an if function or similar to give a reason for why the cell of data has an error.
Basically i have some data in a table, and when a #num! error pops up id like to in the cell next to it give a sentence stating why this has happened.
E.G.
Cell A1 Cell B1
#Num! Number error due to 'x' being too small
Not sure how i can get this to work, i have tried a basic if function but that hasnt worked.
View 4 Replies
View Related
Jan 7, 2010
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
View 2 Replies
View Related
Jul 15, 2008
I am using MS Query to join 3 worksheets together.
I need to calculate one field but it keeps returning an error.
the 2 fields are part of the same table calle "Trades"
The fields are : Quantity and USD Price
USD Price is calculated initially in the worksheet using the current exchange rate.
I can display each fields separately (no problem) but when I try to multply the 2: I get a syntax error.
Things i have tried:
I tried to multiply Quantity by 2 and it works. when I try to multiply USD Price by 2 I get the syntax error.
I also tried to copy the values (not the formula) into a new column called USD Price2 and:
- Quantity*USD Price2 : syntax error
- USD Price2*2: Syntax error
View 9 Replies
View Related
Jan 23, 2007
Private Sub Workbook_Open()
'Application. ScreenUpdating = False ' Turns off screen updating
Dim Filename As String
Dim nFam As Integer
Dim cRow As Integer
Dim i As Integer
ws As Worksheet
Filename = "O:BVRMusers_sharedJCIntraday ToolFamily List.xls"
Workbooks.Open Filename 'Opens Family List
'Count the number of rows (Families) in Filename (Family List)
Set ws = ActiveSheet
With ws
. Cells(1, 1).Select
cRow = .UsedRange.Rows.Count
End With
End Sub
i cannot get ws to be set as the ActiveSheet. i receive a run time error 91 each time and cannot figure out what is wrong. i've used this code before under subform functions, but this is the first time i've placed it in the "ThisWorkbook" area.
View 2 Replies
View Related
Dec 18, 2007
Having a problem with a simple udf to calculate values across multiple sheets using the calling cell as a reference point. It works great until you open another workbook and then switch back. At that point all cells calling this udf return a #value! error. If I type anywhere on the sheet all of the values will recalculate but this is less than ideal for the end users here. below is example of concept
Function TestMe()
Application.Volatile (True)
Dim strCallAddress As String
Dim intSubTotal As Integer
strCallAddress = Application.Caller.Address
intSubTotal = Worksheets(2).Range(strCallAddress).Value
intSubTotal = intSubTotal + Worksheets(3).Range(strCallAddress).Value
TestMe = intSubtotal
End Function
View 4 Replies
View Related
Jul 15, 2006
I've managed to set up a gradebook.
However, is there a way that I can get Vlookup not to return N/A when I have a blank cell on the report (not in the data table). I want to be able to calculate the progressive grade average of a stduent as the year progrsses.
View 9 Replies
View Related
Aug 13, 2008
I have a file created in Excel 2003 that uses a vlookup to reference another file, also created in Excel 2003. The function returns VALUE when the referenced file is closed. I get the VALUE error whether or not I update links upon opening the file. If I open the source file, the function calculates properly.
Here is the formula when the referenced file is open:
=VLOOKUP(A38,'[June Scorecard confirmation.xls]VPSC Summary'!$C$10:$F$22,4,FALSE)
The full & correct path appears in the formula when the referenced file is closed.
Columns C, D & E in the referenced range contain text, column F contains a Sum. This file is linked to another file, also using lookups. The linked area in this file works without problem, but it is a precedent to the calculation in column F.
Both these files reside on a network in subdirectories of the same logical drive. I am using a laptop that briefly had Excel 2007 installed on it, but was wiped clean before it was issued to me.
View 3 Replies
View Related
Aug 2, 2014
I have created a calculated column in PowerPivot and inserted a formula that worked in a normal excel spreadsheet however, this formula does not work in PP anymore.
=find("green",Table1[Name],1)
Name column:
NAME: Bag green
it should find "green" in the name and return the position. Hoever it alway returns the error, that the find function could not find the string.I have attached an example spreadsheet.
View 1 Replies
View Related
Jan 27, 2007
I have searched and found a few postings for #NA errors
The formula I am using is SUMPRODUCT:
=(SUMPRODUCT(('On Premise Activity Tracker'!D19:D26="MAY")*('On Premise Activity Tracker'!H19:H38='On Premise Activity Tracker'!AG32)))
I am trying to count up the number of times 'On Premise Activity Tracker'!AG32 was used from 'On Premise Activity Tracker'!H19:H38 only if it was in the month of MAY.
This is a working document that is going to track information over a years time. Therefore, I have noticed that the formula only works when there are values in the cells. However, when I increase the range to the whole workbook I get the #N/A error because I do not have data in some of those cells.
View 3 Replies
View Related
Oct 1, 2006
I have the following
Private Sub Workbook_Open()
Worksheets("Sheet1"). Range("L5").Value = Date
End Sub
When i try and run the code it returns an error saying: "Compile Error, Cant Find Project Or Library" and it highlights the word "Date"
View 7 Replies
View Related
Feb 26, 2007
I'm using this sumproduct and it works until a cell has text.
=SUMPRODUCT(($C7:$C16=$C$2)*($D7:F16))
I've tried =SUMPRODUCT(--($C7:$C16=$C$2),($D7:F16)) but got the #Value! error because of the D7:F16 range. If I changed it to become F7:F16, then it works. But...my original formula adds all values giving me a YTD result. If I changed the range to be only F7:F16, then all I get is just that column's data. I have January to December's data across the columns from D to F. Any ideas on keeping my D to F range? I've tried Transpose but it didn't work either.
View 9 Replies
View Related
Mar 9, 2007
What is the trick for entering the following equation?
=SUMPRODUCT(LOOKUP(B3:F3,{0,0;"A",4;"B",3;"C",2;"D",1;"U",0}))/MAX(1,COUNTA(B3:F3))
When I enter this equation, it yields an #N/A error
Perhaps the { is being entered incorrectly ?
View 9 Replies
View Related
Oct 2, 2007
I have a weird problem with some cells calculating (for example) =sumproduct(bundleNoNRP, bundleNoQTY). There are a number of cells with similar formulas calcutating with named ranges, and they all display #Value (a value of the wrong data type is used in this formula).
Both these ranges are set up via a VB program.
If i just seperately on the sheet do the sum of either of these ranges it works fine.
What could be going wrong? Is there some way of checking whats in the ranges? I cant see why the data type would be wrong if I can do sum calcs ok..Is there some rule which would mean the calculation wouldn't work anymore? This is part of a much larger VBA project so I hope I have provided enough information.
View 9 Replies
View Related
