Text In One Column But NOT By Text To Columns

Dec 6, 2006

I've had this issue a couple of times and can't work out an easy way to deal with it.

I have text data in one column.

Name
Add1
Add2
City
Pcode
Manager
Name
Add1
Add2
City
Pcode
Manager
etc

How do I extract Row 1 into Column 1, R2-C2,... R7-C1, R8-C2?

To make it more tricky what if there isn't a consistent amount of data, ie sometimes I'll have Manager name (6 rows of data) and sometimes I won't (5 rows of data) and then the next collection of data will have it again.

Does this make sense?

View 9 Replies


ADVERTISEMENT

To Populate Three Columns With Text Based On Text Of Another Column

Dec 16, 2009

I am having a trouble in Excel sheet.My column A has a drop down list with text- possible, not possible, not required.Based on the text, i need to populate texts in columns B, C and D.

For example

Column A drop down selected is "possible"
then B coulmn should automatically populate "1-3"
C should populate with "3-5"
D should be "5-7"

I am using MS excel 2007.

View 9 Replies View Related

Text To Column - Want Columns Formated To Text

Dec 31, 2008

In Column A1:A10 I have a really long series of alpha numberic digits in each cell.

I use this macro with text to column to split them up for me into different columns.

The problem I have is that after they go through this conversion all of the fractions in columns L are turned into dates....

View 9 Replies View Related

Text File Import With Text To Columns Splitting Same Text Differently

Nov 21, 2007

I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.

I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.

FieldInfo:= _
Array(Array(0, 1), Array(18, 1), Array(35, 1), Array(56, 1), Array(70, 1), Array(88, 1), _
Array(102, 1))

View 6 Replies View Related

Add Like Text Totals Of Columns At Bottom Of Column

Jul 2, 2009

Note that the "Fruit" and "Fruit Totals" column letter position will always be different every time I run the macro, so I would like the macro to find these columns by name rather than by column letter.

I'd like a macro that adds the total number of fruits in the "Fruit" column by looking doing 2 things...

1. Add the total number of "Fruits" in the "Fruit" column, find the bottom-most row of data in the "Fruit" column, go down 2 rows, and create the text named "Fruits Total"

2. In the cell directly to the right of "Fruits Total" put the value of the total number of fruits in this cell (which will be in the "Fruit Totals" column)

3. Add the total number of "Apples" in the "Fruit" column, find the bottom-most row of data in the "Fruit" column, go down 2 rows, and create the text named "Apples Total"

4. In the cell directly to the right of "Apples Total" put the value of the total number of apples in this cell (which will also be in the "Fruit Totals" column)

5. Repeat steps 3 & 4 for the other fruits

Best to show you an example ...

View 14 Replies View Related

Columns With Text To Column With Default Percentage

Jul 3, 2012

I have a spreadsheet that tracks in column D "completed" projects. I want column T to populated "100%" when column D has the text "completed" in the cell. What is the formula?

View 1 Replies View Related

Compare Text Strings In Two Columns And Return Text From Adjacent Cell

Feb 28, 2013

how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?

View 6 Replies View Related

Filter On Two Columns And Results Include Text From Either Column?

Jul 5, 2012

I have a file with a bunch of columns in it. Columns C and D have names in them. I want to filter on these two columns where the results show all rows where the selected name is in both.

Example, If I filter on Column C first on 2 specific names (Joe and Chris), it will not show the results in column D if that name was aligned with a different name in column C (Mark and Steve). I need all rows to come back.

Column C
Column D
Joe
Joe
Chris
Chris
Joe
Chris
Joe
Mark
Joe
Steve
Chris

View 1 Replies View Related

Splitting Text And Numbers From 1 Column Into Separate Columns

Jul 24, 2014

I have some data that is both text and numbers in the same cell. I would like to split the the data so that the text is in one column and the numbers are in another column.

The numbers are all a fixed length (15 chars) so I know that I can use the following formula = RIGHT(A1,15)

However I am not quite sure how to split the text as the length can vary as as well as the number of words in the string.

For example A1 is 1 word with 7 characters but A2 is 2 words, 14 characters long inc space.

A1 Goodwin 000710280740120
A2 Gillette Ridge 000715058510122

B1 Goodwin
C1 000710280740120

B2 Gillette Ridge
C2 000715058510122

View 4 Replies View Related

Text-to-Columns Doesn't Work Well When Column Is Selected

Apr 15, 2013

Anyways, the issue is that when I have some cells selected then use the text-to-columns, it works fine.. but when I select an entire column, it "acts a fool"...

I made this video to show the effect on my computer.

View 14 Replies View Related

Convert One Column Of Addresses Into Three Columns When Text To Be Grouped Is Not Even

Jan 10, 2014

I have checked to see if this has been answered before and can not find an exact reply. My problem is that I have a combined column of address: Suburb, State, Postcode - which needs to be broken into three which not be done accurately using tet to column or fx - left mid or right. The issue is that the Suburb could be made up of one or two Words with a space between. So I can not separate using text to columns as in some cases the suburbs comprised of two words will put the second word in the "state" column. It can also not be done using Left, Right,Mid, as they number of characters differs in each line. example problem with columns to text.jpg

COMBINED ADDRESS SUBURBSTATE??POSTCODE??POSTCODE??
ALTONA NORTH VIC 3025ALTONANORTHVIC 3025
BONDI NSW 2026 BONDINSW 2026
WOOLLOONGABBA QLD 4102WOOLLOONGABBAQLD4102
TOOWONG QLD 4066 TOOWONGQLD 4066
NOVAR GARDENS SA 5040NOVARGARDENSSA 5040

View 12 Replies View Related

Extract Text From Column :: Place Into Separate Columns

May 14, 2007

I have a long column of info as below. I want to extract (the name changes)- "SEAPORT TWN" etc and also "01.30" and place into separate columns say G and H at the next available cell.

**
SWITCHLIST FOR TRAIN---Grain Spec -East
DEPARTURE TIME from WESTTOWN is 01:00
TOWN STOP---SEAPRT TWN Arriving at 01:30

PICKUPS
Terminal Shipping Burl North 460020 GRAINCAR empty Elevator Co. Ltd.
Terminal Shipping Sante Fe 100396 GRAINCAR empty Elevator Co. Ltd.
Train should leave this town with 2 car(s)
TOWN STOP---PRARIE TWN Arriving at 02:00

SETOUTS
Elevator Co. Ltd. Burl North 460020 GRAINCAR Grn w/Wht Lttrs -4 Bay
Elevator Co. Ltd. Sante Fe 100396 GRAINCAR Maroon w/Wht Ltr -3 Bay
1/05/2007 8:57:52 a.m. ...............................

View 2 Replies View Related

How To Split Text From Text String Into Separate Columns - No Delimiters

Apr 8, 2014

I have the cell data as below

How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?

I still want the original data as I need to check that the splits worked well?

16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5

View 2 Replies View Related

IF Formula - Column To Show Text Value Dependent On Combination Of Three Columns

May 12, 2014

I have three columns that each have a drop down of text options; column A has three options, column B has three options and column C has two options. I want to have a fourth column that will show a text value dependent on the combination of the three columns.

It ends up being 18 variations so my IF formula just won't compute.

This is basically the format I have and works for a few values then just chucks up an error when I extend it to all 18 variations:

IF(AND(A1="text",B1="text2",C1="text3"),"show this text",
IF(AND(B1="other",B1="other2",C1="other3"),"then show this", ) etc etc

Any way I can get this to work for all 18 possible outcomes??

View 6 Replies View Related

Find Columns By Name And Highlight Them Certain Colors Based On Text In Another Column

Jul 9, 2009

I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...

1. Vacation Type (will only have a text value of either "Cold" or "Warm")

2. Vacation Started (will always have a date *x/xx/xxxx)

3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)

4. Number of Days (currently has ALL truly blank cells)

THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE

Here's what I would like the macro to do...

Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.

The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.

A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................

View 12 Replies View Related

Extracting Strings Of Text From Columns Of Data(text)

Apr 23, 2007

What I have is a column of data(text) which contains amongst all the text three strings of text in ever cell in the column which I require copying into three adjoining cells

The data I require is :-

(a) The persons name which is always after the word ‘Requester’ e.g. Requester Steve Robinson

(b) Their office location which is directly after the persons name and is in brackets e.g. (Newcastle User)

(c) The Approving persons name which is preceded by ‘Approved by’ e.g. Approved by Christine Hunting

See examples 1 & 2 below

Example 1

CR0/CRZ3651 Requestor Steve Robinson (Newcastle User) Tel: 01234 798157 Approved by Christine Hunting

Please install and configure 2 Ultra 2s (typhoon and lancaster) for use as ARTE workstations. These workstations require Solaris 2.5.1 plus the same patches as before

Example 2

CR0/CRZ3118 Requestor Doug Cunningham (Newport User) Tel: 0114 9881480 Approved by John Smithers

Please provide support to set up Cisco 2691 Router and PIX-506E Firewall to enable external connection of a remote terminal for project work.

As you will appreciate the text in the cells is of non standard lenght and the three pieces of information can be located virtually any where in the text

View 9 Replies View Related

Finding Minimum Value In Column Based On Multiple Text Criteria In Other Columns?

Jan 2, 2013

This formula allows me to find the lowest value in column U where column N contains the text "NO".

{=MIN(IF($N$2:$N$10000="NO",$U$2:$U$10000))}

I want to add another condition so that the formula only returns the lowest value in column U where (i) column N contains the text "NO" and also (ii) column F contains the text "YES".

View 11 Replies View Related

For A Column Of Cells Separate Text In Single Cell Across Multiple Columns

Nov 29, 2013

New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:

(NOTE: does not contain actual names or info) Book1.xlsx

This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?

While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.

View 6 Replies View Related

Text To Columns :: Macro To Split Text

Jun 17, 2008

I am trying to write a micro code to split text which is copied into cell A1 into columns. I can do this fine by going to "data" the "text to Columns" and selecting the places i want to split the text (this is the same for every piece of data i copy in).

The macro works perfectly every time. the problem is that the spreadsheet is shared and i want to protect certain cells on the sheet, when i protect the sheet the recorded macro does not work as the "data", "text to columns" is not available in a protected workbook.

I was just wondering if someone could help me, so i can run a macro to split the text which also allows me to protect cells. In the "text to column" option the "fixed width" (column breaks) i choose are: 4, 25, 34 and 43.

View 11 Replies View Related

Use Text To Columns Feature To Be Text To Rows?

Jan 13, 2003

I have a cell that has a comma separated value that is 354 fields long. As such, if I use the Text To Columns feature to split the data at each column, I lose several columns (because excel cannot have that many columns).

How can I break the data at the comma, but have it list in rows instead?

View 9 Replies View Related

Find Specific Text In Multiple Rows / Columns And Align All Vertically To Same Column

Apr 25, 2013

I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.

The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?

View 2 Replies View Related

Text To Row Instead Of Text To Column Using Comma Separated Values And Associate Cell To The Left

May 16, 2013

Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?

The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.

I have over 600 rows that needs this done.

1,2,3,4
B

[Code]....

View 3 Replies View Related

Text Search Returns Cell Text Contents Of Different Column In The Same Row

Jun 7, 2007

Search a worksheet for a user defined text string, and have excell return the contents of a predetermined column in the same row in which the text string was found.

A prepopulated worksheet has the text "gold" entered in cell T278.

1. user searches for "yellow_metal"
2. Excell finds "yellow_metal" in row 278, say in cell A278.
3. Excell then goes to predetermined column (programed as part of macro or VB), say "T", and returns the text contents of the cell in that column, T278 in this example.
4. Excell returns "gold"

View 9 Replies View Related

Find Text Within Cells & Place Same Text In Adjacent Column

Apr 10, 2008

I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.

Example:

Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.

View 9 Replies View Related

Specific Text In Column And Then Imputing That Text In A Cell?

Feb 3, 2014

So I have a column that will have the same text in all of the cells contained within it except for one cell. Is there a formula that I can use that will automatically find and transpose the text of the one cell that is unique out of the column? I was thinking of an IF function, but the column could be up to 60 cells in length.

View 1 Replies View Related

Taking Text In A Long Column And Converting It Into Corresponding Text In Another?

Sep 27, 2013

I have two columns that read:

XXHSXX HR
XXTRXX MG
XXXFXX XG
XXHSXX HS
XXTRXX MG
XXMEXX RU
XXHSXX HR
XXHSXX
XXTRXX
XXTRXX
....

The above list represents 2 columns. The left column is 400 lines long. The right column is partially complete with 2 letter codes that represent the 6 letter codes on the right. I'm trying to convert the column in the XXYZXX format to a 2 letter column and each of those 2 letters corresponds to the 6 letter column on the left. How do I do this using any method or Vlookup? How does one convert a column of text to a corresponding column of text? I don't want to have to manually type in 2 letter codes that match up the left column. What do I do instead?

View 2 Replies View Related

Converting Column Of Text To Different Text?

Feb 1, 2013

I have an excel file that contains data imported from a csv file. One of the columns contains text strings that I would like to convert to a different text string. The column that I want to convert has text data that is similar to the following format:

BL BLDO
BLDO
BLDO
BLDO
EL BLDO

Now, the data above should look like this:

+CONC
CONC
CONC
CONC
-CONC

The "+" should replace the "BL" in the first row. The "CONC" should replace the "BLDO" in all rows. The "-" should replace the "EL" in the the bottom row. Within these files that I work with, there are perhaps 60 or 70 unique text items that each have a corresponding text item that should replace it, and the files usually contain upwards of several hundred to one thousand rows of data. In other words, I have a list of 60 or 70 text strings that have a specific replacement text string...and I need to apply that conversion to several files each day.

View 1 Replies View Related

If Text Of Cell In Range Matches Text Of Cell In Column - Match Formatting

Jul 5, 2012

Trying to create a button that, once clicked performs the following task:

Checks whether the text in a cell in the column X2:X40 matches the text in a cell in the Range A2:U14.

If it does, the formatting of the cell in X2:X40 (eg background) must change to match that of the corresponding cell in A2:U14.

Only 1 cell in the range will match 1 cell in the column

For example:
Before click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a clear background

During click:
matches these cells
changes X4 so that it also has a yellow background

After click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a yellow background

View 3 Replies View Related

Excel Text Search Through Different Types Of Text And Action Based On Text

Oct 14, 2008

1. Search an excel sheet "column" for a particular type of text and insert values based on that text (if found) in another column.

e.g I have column A1 to A10 with different types of text. I would like to search for the keyword "Risk is high" OR "Risk=High" for each cell in the column and insert a "1" if found beside it's corresponding "B" column. If not found, I would like to insert a "0".

So, if the text "Risk is high" OR "Risk=High" was only found in A6, I would like B6 to be "1". Rest of the values in the B column would be "0's", since the text was not found in any of the other cells.

View 10 Replies View Related

Excel 2013 :: Set One Columns Text To Color Based On Another Columns Results?

Apr 9, 2014

how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.

I'm using Win 8.1, Office 2013.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved