Excel 2013 :: Set One Columns Text To Color Based On Another Columns Results?
Apr 9, 2014
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
long story short, we ended up with an excel sheet like this: Screen_Shot_2014-05-11_at_4.png
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.)
Screen_Shot_2014-05-11_at_46FDQO.png
I googled for days, i only found Visual basic commands i guess? that only merge same rows. and they were poorly made. beside that it didn't work properly. Method to do it automatically?
Please see the attached example. I'm trying to highlight cells only if 2 values in the row match 2 values in another row. If a book title/author combination matches that of another title/author combination in a different row, it would highlight. Some alternate rows will contain different titles by the same author, and some rows will have like titles by different authors...but they should not highlight.
The only situation where highlighting would occur is if the title/author pairing appears in another row.
I'm trying to decide if this would be a conditional formatting/highlighting rule, or if it would be a macro/vbs?
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
Excel sheet like this:
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.) Any method to do it automatically?
I have 2 columns with a list of competitors (competitor 1 & competitor 2) involved in a negotiation + the price/value of the negotiation. Each line represents a negotiation with a value in numbers & the names of the 2 main competitors involved.
I have around 150 lines in the original file and would like to show in a graphic what are the competitors that we regularly find in the negotiations and what is the value of the negotiations they are involved.
The problem is that there is no main competitor so i can find the same name in any of the 2 columns and i cannot make separate graphs for each column because if i do so i duplicate the value.
Is there any way that aggregate this info into a single graphic/pivot graphic? Im using excel 2013
I have a speadsheet that has a table containing scores of audits, in the last 3 columns of the tabe I have the two totals (columns AC and AD)
In Column "AF" I wish to show where they will rank based on the results, first I need to rank via the result of column AD and if that is the same as another result use column AC to determine where they rank.
I have a file with a bunch of columns in it. Columns C and D have names in them. I want to filter on these two columns where the results show all rows where the selected name is in both.
Example, If I filter on Column C first on 2 specific names (Joe and Chris), it will not show the results in column D if that name was aligned with a different name in column C (Mark and Steve). I need all rows to come back.
Column C Column D Joe Joe Chris Chris Joe Chris Joe Mark Joe Steve Chris
I'm not sure what I'm trying to do is even possible, but figured this is the place to ask the question. I'm trying to compare a list of companies (column a) to a list of employee email addresses (column b) and post results (column c) that display all associated email addresses that are unique to company name. Since multiple employee email addresses can be associated with numerous company names.
I have a worksheet with five columns (A, B, C, D and E)
The cells in Column B contain letters and/or numbers (without spaces) in no particular order. The cells in Column C contain letters and/or numbers (without spaces) in no particular order.
I want to compare all characters in 1st Cell of Column B with all characters in 1st Cell of Column C, and display the matching characters in 1st Cell of Column D, and the character count of 1st Cell in Column D must be displayed in 1st Cell of Column E. note that multiple instances of the same character must not be treated as duplicates. When execution on 1st Row is finished then repeat procedure for Row 2, etc... Stop execution when first empty cell in Column B is located.
Use filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are: And Word1 you Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter) And Word1 you Is the blah Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
Here is an example of what I am trying to do in E2013.
The orange Bin is my input. It want that to return the column associated with the # as show in orange output column. I think this is an index command? I cannot seem to make it work.
Also - is there an easier way to insert sheets other than a screen grab and photos?
I have one column of data which I need to split into two. Those values that are bold need to migrate to column B. Have some difficulty in phrasing the question properly.
Original: A 10 0 0 2 4
Desired output: A B 0 10 2 0 0 0 2 0 0 4
* note a few formatting issues here: 1. instead of bold and not bold, they are in green or in purple 2. 0 stands for an empty cell in my data set (I tried to fill the empty cells with zeros, but they somehow inherit the colors, i.e. some zeros are green and some zeros are purple; guess that wouldn't be a problem since the desired output they'll all be zeros anyway?)
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
I have a simple spreadsheet. A column for a persons name and 31 columns, one for each day of the month. I want to apply conditional formatting, either fill color or border color, to the date column of the current date when the spreadsheet is opened.
I was handed a pdf of some leads by a co-worker. Finally, I got the data into excel but it's in a pretty useless format... 30,000 rows of contact info with no rhyme or reason. I want to upload this into our CRM, but I need to get all the different bits of info into separate columns. I'm no excel pro, but I managed to use an Excel plugin called ASAP tools to bring some order to this chaos... All names have a blue cell color, all titles have a green cell color, work phone is red, and so on.
Does anyone know a way that I can sort these into separate columns? I've trying playing with the Filter function, but it hides rows which makes the output useless for my purposes.
I want to show 8 members of staff's names, with their sales closing percentages. I want then to produce a chart showing their percentages as a column with a line showing 16% going across the chart showing who is above and who is below the target.
Ideally i would also like to change the colour of the columns or background of those below the line to show who is under target.
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
In the attached example, you will find column C which has a bunch of qualitative results. Also, in the file or worksheets, you will find Table A which has a color code range.
I would like to have a conditional format down column C that will reference Table A, regardless if it's on in the same worksheet or on another worksheet within the same file?
I have been trying to make a macro to automatically calculate the quantity I need to increase or decrease our purchase orders.
example.jpg
As the On Hand quantity decreases I have set conditional formatting to determine how much we should order according to a percentage of the Stocking Level and turns the desired cell yellow. For each row the macro would need to identify which cell in columns L through O is yellow from conditional formatting, use that value and subtract the On Order quantity, then put the result in the Adjust PO Qty (+/-) column so I know how much to decrease the order if negative or increase if positive.
I am having a trouble in Excel sheet.My column A has a drop down list with text- possible, not possible, not required.Based on the text, i need to populate texts in columns B, C and D.
For example
Column A drop down selected is "possible" then B coulmn should automatically populate "1-3" C should populate with "3-5" D should be "5-7"
I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
I've attatched the workbook here with some dummy values in place of financial figures (We don't base our profit on RAND() formula's )
Essentially, I would like to search for CAN in A and SER in B and if they're found, to alter them to SYD (A) and CAN (2). It's essentially an automatic find and replace, but based on 2 criterias rather than one.
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
Scenario 1-AIF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR… Scenario 1-BIF the number of days difference is MORE than 7 days, highlight the cells in the "Vacation Ended" column and "Number of Days" column GREY..................................
I have a large number of product descriptions of varying lengths (column A) which I need to split into a maximum of 3 columns depending on the total length of the description. Each description in column A is less than 90 characters. Each column (B, C & D) can only be a maximum of 30 characters including spaces and commas etc. Also words cannot be split. Below is a sample of the result I would expect with the description in column A and the 3 extracted columns in B, C and D. I am using Excel 2003.