Filter On Two Columns And Results Include Text From Either Column?
Jul 5, 2012
I have a file with a bunch of columns in it. Columns C and D have names in them. I want to filter on these two columns where the results show all rows where the selected name is in both.
Example, If I filter on Column C first on 2 specific names (Joe and Chris), it will not show the results in column D if that name was aligned with a different name in column C (Mark and Steve). I need all rows to come back.
Column C
Column D
Joe
Joe
Chris
Chris
Joe
Chris
Joe
Mark
Joe
Steve
Chris
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D. So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
I have spreadsheet that tracks flights between cities. The spreadsheet has become quite large, so I need a few simple tools or tricks to search it efficiently.
To keep things simple: the spreadsheet has "Departs" and "Arrives" columns, tracking the cities on either end of a flight. (See below)
If my boss says, "give me a list of all flights going through New York," I have to manually filter for "New York" in the "Departs" column, copy that to another spreadsheet, then filter again for "New York" in the "Arrives" column, and manually glue the results together. In my little toy example, that's not a big deal, but when there are up to a couple hundred flights (and just as many cities), this gets tedious and error-prone.
Is there some handy way of filtering for "New York" in both the "Departs" and "Arrives" columns? Or some other way of achieving the same thing? ("Find All" isn't useful unless I can export the full rows into a spreadsheet.)
I need the values that are copied from the template to copy over in text form from the "Data" Tab. Secondly, the master sheet has multiple lines for each vendor. For the area highlighted in red I'd like for it to copy all cells in column C for the vendor and search the vendor by name. Then, move to the next sheet.
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I'm not sure what I'm trying to do is even possible, but figured this is the place to ask the question. I'm trying to compare a list of companies (column a) to a list of employee email addresses (column b) and post results (column c) that display all associated email addresses that are unique to company name. Since multiple employee email addresses can be associated with numerous company names.
I am in the process of making a database more efficient and am running into a problem with sorting data. I currently am trying to use AutoFilter to sort the data. When I want to then narrow the results further using the same column as the critical and there is nothing that matches the critical, I get everything from the entire database that matches that critical rather than what I want to see, which, in this case, would be nothing.
I have attached a sample file. In it, when All AF 1000 is run and then Selected MAC 2000 Wash is run, I want to see no results instead of seeing all MAC 2000 Washes from the original data set. I can do it using IF/THEN but I am looking for a faster way to do it.
for example here i want to keep only gen, red and white columns only out of columns what i have in my data. I have so many columns in my original data but here i given just small example. How to proceed with macro or any other way because removing manually taking long time for me.
If i use text to columns using comma as a separator, it does not give me the desired results when I have a text like "FAIRFIELD I&S - E PEORIA, IL". I want this display as "FAIRFIELD I&S - E PEORIA, IL". But if i use this feature, I get "FAIRFIELD I&S - E PEORIA" in one column and "IL" in another column. Ideally I want it to show "FAIRFIELD I&S - E PEORIA, IL" in a single column.
I am trying to create a search filter that checks a cell for text or part of text in 3 columns and then filters out the rows that have a match. So there would be a cell at the top of the page with a line around it and the word type your search criteria here. The used types in a word and excel then looks into 3 columns below that have various data. If there is match then a filter action would kick in and only show the rows where there was a match regardless of the column.
I have four columns of data (in column B) across 4 worksheets within the same workbook. The rows in this columns contain text. In some cases the text in various rows of each columns are identical, and in other cases they are unique. There is a percentage in column C for each text in column B.
What I'm trying to do is as follows:
Create a consolidated list of all four columns into a single column (say column A in a separate sheet). Therefore, each row in this consolidated column will have a unique text based value.
Have the percentage value for each unique text based entry in column B of the separate sheet. if the text based contents in the column A row is one of those that had the same entry in the original four columns, then the average of the percentages will appear in column B.
I have a very large spreadsheet (almost 9000 rows). I have filters on all columns, however when I click to see all the results for the column under the filter, just to view the contents of the row, some are not there. Does a filter have a limitted amount of rows it can hold.
I have a basic spreadsheet with a column of names of people (Matt, John, Mike), and specific sales numbers for each. I would like to have a cell give an average of the sales numbers based on how I filter for either Matt, John, or Mike individually.
For example: If I filter to see only Matt, I would like to see the average for Matt only, and when I filter to another name such as John, I would like to see the average number change to see only John's.
I have a table in which the rows represent cities and the columns represent certain characteristics/ attributes a city can have. In the cells every city & attribute pair receives a "grade"
City EatingBeachSki Barcelona 210 Chamonix 002
I would like to transform this so that every row represents a city & attribute pair and includes its corresponding grade.(I want to do this in order to be able to add more information about city- attribute pairs rather than about cities only)
I am aware that I can use a pivot table to sort out all the pairs with a specific grade. and then I could paste this into a new table. But my data base (number of cities x number of attributes) is huge and I was wondering if there is no automatic process to make this transformation.
I have a workbook with multiple sheets , final sheet has a data of all sheets , in the first sheet i want to select what results to be shown in that final sheet ,, specially the week and the LDM
I want to filter my results using a combo box on my spreadsheet. I don't mind how this is done, even if it just hides all of the information which isn't relevant. I've done it with a VLookup but I want to be able to edit it easily without the formula popping up. So if you click Barlcays, only barclays appears. I'd also like a button to reset if possible. I've attached an example of how I sort of want it to work.
how to return data to a second sheet if data selected via a filter.
i have attached spreadsheet i am working on and looking to make this as easy as possible
on sheet "data" cell f2 im looking to return all goals scored by hull on sheet "data" cell f3 im looking to return all goals conceded by hull
on sheet "data" cell f5 im looking to return all goals scored by hull at home this i will need to do by selecting hull in "home team" filter hull
on sheet "data" cell f6 im looking to return all goals conceded by hull at home this i will need to do by selecting hull in "home team" filter hull
on sheet "data" cell f8 im looking to return hulls last 6 games as over and under which in this example will return the last 6 rows 27-32 and will read 4 under 2 over
on sheet "data" cell f9 im looking to return hulls last 6 games at home as over and under which in this example will return the last 6 rows 22/23/26/27/29/32 and will read 3 under 3 over
A friend of mine asked if there is a formula that will add the "Y"'s and "N"'s based off of a filter per certain dates. Below is a brief example.
2/18/2009Y 8/15/2006N 2/18/2009Y 8/15/2006N 4/6/2005 N 4/6/2005 N
We want to be able to sort by dates so regardless of which date we pick, below the Y's and N's will be the total for the Y's and N's that are visible. If sorted by April, it will show 2 N's and 0 Y's, and so on. Is there any formula out there that can do this.
I'm trying to get certain data from an export of a phone logging report for a call center. I have exported this data into an excel spreadsheet. I would now like to retrieve the following information from the sheet.
'Agent name, Date, time of Login, time of Logout (at end of day).'
I have coloured these fields in red for easy finding. I do not require anything else from this data, however, within this sheet there are multiple agent names and can span for over a month. All names and dates are required. I have attached the current sheet, and also what it will possibly look like once complete. I would prefer the whole process to be automated if possible.
I am having a trouble in Excel sheet.My column A has a drop down list with text- possible, not possible, not required.Based on the text, i need to populate texts in columns B, C and D.
For example
Column A drop down selected is "possible" then B coulmn should automatically populate "1-3" C should populate with "3-5" D should be "5-7"
I believe that the best way to evaluate this request is to look at the example. I have 2 buttons to demonstrate what I need, along with written instructions.
I'm attempting to use Excel as a writing tool.. it's incredibly powerful as it will allow me to customize my workspace, create links, flow charts etc... but an area I'm most concerned of is at the heart of this endeavor, which is text... lots of text!
I believe there is a limitation regarding the amount of text within a cell ( something like 250 characters?) Is there a way to customize/format a cell to include much more text?
What route would you advise? ..Forms, pivot tables, textboxes?
I want to sum number values in a column. I have used "=SUM(C4:C100)" and it works a treat. Now the twist. I have an adjacent column (Column D) and only want to add values in Column C, where a corresponding value is in Column D on the same row.
So for example if I have C5 as $1000 and D5 as 13/5/13, I want to include the $1000 value in the sum of Column C. However, if I have C5 as $1000 and D5 as blank, I don't want to include it in the sum.
i have a work book of 12 sheets, the two main sheets 1+2 have 5000+ rows. by 30 columns. each row column b is a site number in ascending order(up to 4 for each site) so auto filter select = to site 5 about 10 seconds later i get the result of 3 sites try site 846 30 odd seconds later up pops the result. so i copied the sheet to a new work book and tried and it's nigh on instantaneous. next step copied sheet paste special values into new sheet in same original workbook and tried filter on that still slow as ever, thing is this book around 8meg and i cant for the life of me work out why ive cleared excessive formats and reset last cell on each sheet. there is a vlookup from sheet 1 to 2 for each site to return serial numbers. i have tried it in vba by turning autocal off/on but still no difference.
I created a user form that provides a menu that allows users to perform advanced filtering. They can also scroll through the results freely. A problem is that a subsequent advanced filter selection does not always display the top row of filtered records, depending upon what the user has chosen to display prior to selecting the next set of filtered records.
How can I make the top row of filtered records always be displayed so that users will not overlook results of advanced filter operations?