Time Formatting - Automatically Enter Pm In Column
Nov 29, 2013
How to set a column up to show it as the time of day but unless I enter PM after I put the time in the column it always comes up as AM.
Is there some way to just enter 9:09 in column d and or f and have it show up as pm? When I enter 8:10 in column b it automatically adds the AM to it but if I do the same in the column for the night and I do not type in pm it will automatically enter it as am.
I have attached the workbook and did delete the macro - which was just to clear all of my entries but when I click to open it again I am still getting the message about the macro.
In the workbook when I enter the time in column B I can just type in 7:14 and it will automatically add the AM to it. However, when I get to column D or F if I just type in 9:09 or whatever time it is in the evening it will automatically add AM to it unless I type 9:09 pm.
Is there some way to set it up so that I can just enter the time and it will automatically enter pm for everything in that column?
2013 sugar logs.xls‎
View 9 Replies
ADVERTISEMENT
May 8, 2009
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
View 3 Replies
View Related
Jan 20, 2009
I want to enter any thing in column (A) and then the date & time automaticaly put in column (B)
enter any thing in (A1), the date & time entered in (B1) automaticaly
enter any thing in (A2), the date & time entered in (B2) automaticaly
and so on ...
View 7 Replies
View Related
Sep 9, 2012
I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
View 1 Replies
View Related
Apr 9, 2012
Any way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
View 1 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Mar 23, 2012
I am trying to keep my checkbook in excel and want to make a spreadsheet that inserts a row every time I hit enter. That way my most reason transaction and balance is always at the top rather than the bottom of the spreadsheet... The inserted row should have the same formulas as the row below.
View 7 Replies
View Related
Apr 25, 2007
How do I get a cell to automatically add the numbers as I enter them,for example. I want to keep track of my gas bills for income tax. So if I go in each day to add that days gas amount I want that cell to auto add each entry for me, rather that constantly add my bills and then re-enter every time I enter new amounts.
View 9 Replies
View Related
Nov 10, 2006
I would like to place a value of like say 100 dollars if the cell next to it is populated with any text for example: customer then 100.00 so if I type anything the cell, the next cell populates a specified value
View 5 Replies
View Related
Apr 3, 2007
I have recently written some programming in a spreadsheet (1) which, on opening, opens up another spreadheet(2), ammends this spreadsheet(2), and then closes it before the user can start using the original one(1). This is done to monitor the usage. The information added into the atomatically opened spreadsheet(2) includes date and time of opening and the users id as well as adding 1 to counter cells. Both .xls files are located on the same server and I dont want people to catch on to the monitoring and if they do I dont want them to then go into this file(2) and remove their information.
If I password protect this file(2) it then promts to enter a password when it runs at the startup of the initial spreadsheet(1) which is no good as it would defeat the purpose if the user knew the password. Is it possible to add a few lines into the code (see below) after it initiates the opening of the usage file?
Private Sub workbook_open()
Application. ScreenUpdating = False
Workbooks.Open Filename:= _
"S:Newman CommonCATEGORY MANAGEMENT - RangesEPoS Usage.xls"
Dim Counter As Integer
Counter = Cells(2, 7)
Counter = Counter + 1
Cells(2, 7) = Counter
Cells(Rows.Count, "BV").End(xlUp).Offset(1, 0) = Now
Cells(Rows.Count, "BW").End(xlUp).Offset(1, 0) = Application.UserName
ActiveWorkbook.Save
ActiveWindow.Close
Application.ScreenUpdating = True
End Sub
View 6 Replies
View Related
Dec 18, 2012
I was wondering how I could automatically enter a value next in a sequence in a cell when an adjacent cell has data in it and continue doing so indefinitely (or until the 65536th row). I could do this with autofil, but The sequence starts in the middle of the worksheet (there is a title and document data in the top few rows). The layout is as follows:
Cell A17 has "Part 1" in it (and always will before the form gets filled out), and all cells in colum A beneath that will be blank. Column B is where the user enters a dimension. So, at the start, entering a value into cell B17 won't do anything. However, if they enter a value into cell B18, I would like cell A18 to automatically be filled with the next part number in the sequence (in this case, "Part 2" in cell A18). The user will never skip rows when they enter data so the sequence will always be +1 to the previous cell in the column.
I'm doing this so they can just print out the completed sheet and not have to edit out the empty "Part *" cells that have no corrosponding dimensions.
Is there a simple way to tailor autofill to do this or would I need a macro?
View 3 Replies
View Related
Oct 8, 2013
I have a command button that opens 5 windows when it is selected. Each window asks us to enter the username, password and logon to in order to sign on...thus, we have to do this a total of 5x manually.
If possible, I'd like for the aforementioned fields to be entered using VBA code, so when I click the command button, all 5 windows open with the login infomration already entered.
For examples, sake, lets say the usernmae is ABC1234, the password is Password and the Logon To field is Alliance. If this is possible, how would I code this?
View 2 Replies
View Related
Apr 21, 2009
Is there a way that Excel can automatically enter to next row once the typing has reach the end.
Example: I have 5 columns (A to E) and I am typing at column A. While typing, the text will go along to cell B, C, D and E. The problem is, if I don't manually go to next row and continue typing, the text will go to column F, G and so on. Is there a way where excel can automatically jump to next row if the text has reach column E?
Another problem is, say I have 3 rows full of text (column A to E). If I edit one of the row to exter some new texts, the whole sentence will go along to column F, G and so on. What I can do now is, re-edit all the rows to adjust them back.
View 9 Replies
View Related
Nov 22, 2006
I'm trying to write a macro that automatically italicize the a range of cells when you select a cell, and de-italicize it if you click it again. In this example, when select B12, the macro will automatically select B12:H12 and italize them. And if you select B12 again, it will automatically select B12:H12 and de-italize it.
This is what I have so far:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
MyAddress = ActiveCell.Row
If MyAddress > 11 And MyAddress < 159 Then
If Not Intersect(Columns(2), Target) Is Nothing Then
Intersect(Columns(2), Target).Resize(, 7).Select
End If
Select Case Target.Font.Italic
Case "True"
Target.Font.Italic = False
Case "False"
Target.Font.Italic = True
End Select
End If
End Sub
The code above does not work correctly.
View 4 Replies
View Related
Jan 6, 2014
In column B I will be entering a number and I would like it to automatically enter gallons in column c when i do so. So if i enter 356 in b2 i want it to say gallons in c2.
View 1 Replies
View Related
Jan 14, 2009
See attached sample sheet for more detail. I used code for show date and user id in cell “H” and “I”, but my problem is when ever I write some thing between cells “A” to “G” and enter the pointer automatically jumped to cell “H”, I want when I enter the pointer should be stay next cell.
View 2 Replies
View Related
Jun 1, 2006
I am making a template for my company to automatically calculate the amount of sheet metal needed for a specific job. The spreadsheet could get very long depending on how much duct is needed. Is there any way I can automatically insert rows to the end of the sheet by pressing enter after filling the last row with data, which would then move the totals down. Also, the formatting of the rows I wish to add need to be copies of the ones above.
View 3 Replies
View Related
Jan 8, 2010
I am working on blood pressures. I want cell C1 to place either, "Prehypertension","Stage I Hypertension" or, "Stage II Hypertension" depending on the values of cells A1 or B1 ....
View 7 Replies
View Related
Sep 23, 2008
I am trying to use visual basic editor in excel. I have all ready set up my user form where information can be entered, but I ave having trouble getting the information that is entered in the user form into the correct cells in excel.
I am wanting my information to enter the tables and then automatically move into the next available cells below.
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("details of cars in stock")
iRow = ws.Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row
If Trim(Me.txtreg.Value) = "" Then
Me.txtreg.SetFocus
MsgBox "please enter a registraion number"
Exit Sub
End If
ws.Cells(iRow, 1).Value = Me.txtreg.Value
Me.txtreg.Value = ""
View 9 Replies
View Related
Feb 25, 2013
I have some VBA code which hides columns based on a cell value. The cell value changes according to which option button is selected. The code works but not when the button is selected and the cell value changes. It is necessary to click elsewhere in the sheet or press Enter to get the columns to hide. I want it to do it automatically as a user wouldn't know to click elsewhere.
The working code is:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("N5").Value = 2 Then
Columns("O:R").EntireColumn.Hidden = True
Else
Columns("O:R").EntireColumn.Hidden = False
End If
End Sub
N5 is the linked cell for the option button.
View 4 Replies
View Related
May 7, 2014
I am needing a custom format for the following. I need a cell entry to be 1 letter, three numbers, a dash, 5 numbers, a dash, two numbers, a dash, and then two number. Example: A109-54785-13-00. The first letter will almost always be an "A."
To further complicate the matter, the entry is copied from an email and pasted without the dashes. In the above example, the number in the email would read, "A109547851300." I copy it from the email and paste it in the proper cell in the worksheet. I would like the custom format to automatically enter the dashes at the appropriate spot.
If it was all numbers, this would be easy. I created a custom format for the numbers, but when the A is included, Excel no longer treats it as a number and the custom format did not work.
Is this possible in Excel (without VBA).
I could use the custom number format I created and then later go back and add the "A" at the beginning, but that is as much work as manually adding the dashes.
View 2 Replies
View Related
May 23, 2008
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
View 4 Replies
View Related
Jun 13, 2009
I have a textbox (on a userform) that populates into a spreadsheet. the way I have it set up the user enters a time, but omits the semicolon, and a macro adjusts the time to show the semi colon in the spreadsheet, that is working great. But what I would like to do is to use a textbox change event to force the user to enter a valid time using a 24 hour clock. I have the textbox set to accept numbers from 0 to 2400, using the textbox change event but this allows the user to enter an invalid time such as "1575" basically anthing above 59 for the last 2 digits would be invalid.
View 9 Replies
View Related
Aug 25, 2012
I have this code and that allows me to enter the time without using the colon but only in 2 columns, I tried to add to the range "BJ2:BJ105" but this throws an error when I try to enter the time, is there a way to use this code and set it for multiple columns?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TimeStr As String
On Error GoTo EndMacro
If Application.Intersect(Target, Range("AZ2:AZ105", "BE2:BE105")) Is Nothing Then
[Code] ..........
View 2 Replies
View Related
Oct 31, 2011
I am trying to enter a blank row everytime the 2ND character of a field changes...
sample cells (ALWAYS COLUMN B)(last row needs to be calculated as it changes daily):
2T2W3D3L4H4N4N4N6C6C
when done:
2T2W3D3L4H4N4N4N6C6C
was trying this:
Code:
Dim chkConfirmRw, LastNameRow As Integer
For chkConfirmRw = LastNameRow To 1 Step -1
'Compare the current cell to the one below it
'If they don't match, insert a row row below the current Row
If Range("B" & chkConfirmRw) Range("B" & chkConfirmRw + 1) Then
Range("B" & chkConfirmRw + 1).EntireRow.Insert Shift:=xlDown
End If
'Decrement the counter and do it again
Next
but it does not work.
View 3 Replies
View Related
Oct 28, 2007
I have used the format [hh]:mm in a cell for 24 hr clock calculations. Why do I have to enter the numbers with a colon when I populate the cells? Is there a way to set it up so I just type in the four numbers and the colon between the hours and minutes populates itself?
View 9 Replies
View Related
Nov 15, 2006
I have a spreadsheet in which I want to track the date and time someone made an entry in an adjacent cell (so if someone enters something in B2, I want the date/time of that cell edit to appear in C2).
When the date/time has appeared, I want it to remain the same and not update when the worksheet is opened the next time. So I can't use NOW to pull it in, because that's going to change every time the file is opened.
View 2 Replies
View Related
Oct 5, 2008
in my spread sheet i am trying to use the if function to compare the current time ( vb code used) to a time i enter to alter another cell.
for example
if A1(current updating time) = A2 ( time i choose) then
B1( some value ) = B2( another value)
the point of this equation is to have B2 update its value from B1 every day so today B2= 3 and B1 =4 then tomorrow B2 would = 4 etc , i just dont know how to do it.
View 9 Replies
View Related
Mar 26, 2014
I work at a facility where we care for adults with disabilities and we need to record times that clients arrive and leave. I created an attendance check-in sheet that needs the current time entered quickly. Is there code that will allow staff to double click on a cell and have the current time entered and rounded to the nearest quarter hour?
View 1 Replies
View Related
Nov 22, 2008
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies
View Related
