Total Units For Each Customer
Feb 3, 2009
I have been tasked with tracking the expected income for our Advertising Department. (I work for a newspaper.) The rate I charge an ad depends upon the total number of advertising units a customer purchases during an entire billing period. Essentially: I need to have a total of column G for when column B matches the current row. I need this in column K. The value of K should be the same when the value of B is the same.
My programing flow chart I sketched out checked to see if any row in column B that is above the current row matched the current row's data. If it did then it would use that row's value for the total number of units. If it did not it would add up the units from G when B matched the current column. I attached a document
View 2 Replies
ADVERTISEMENT
Feb 19, 2009
i need a formula that will return the total value of units which is greater than 20000 in col b between 5 and 30 days
AgeUnits272,472,215.29134,354.83112,714,300.007-112,566.006-239,853.006-105,938.006-36,792.006-608,695.001827,632.007-21.00
View 9 Replies
View Related
Jun 5, 2014
Basically the first worksheet (equipment list) is set out for parts used for each individual unit which can be printed out for each unit.
The second worksheet is an equipment list, where each part number and quantity required is displayed which can be sent to suppliers for ordering.
At the moment I
-> copy the equipment list to a new worksheet
-> do an advanced filter for "Unique records only"
-> =SUMIF('Equipment List'!B:B,'Parts List'!A16,'Equipment List'!D:D)
which is much faster than the way we used to do it.
The problem is, when I add a part to the equipment list that is new, I need to go through the process again.
Is there a way to automate so any parts I add to the equipment list, if it is the first time the part number has been entered, it will copy to the parts list worksheet and update the qty column or if it is an existing part number it just updates the qty column?
The equipment list may potentially have up to 100 different drives, but using mainly the same equipment.
I created this sample on an old desktop using excel 2003 but I use 2010 on my laptop.
View 3 Replies
View Related
Nov 4, 2009
Please see the attached example.
I am working with Office 97 and I know that if I had Office 2007 this question could be easily answered with the "SUMIFS" function. But since Office 97 doesn't have that formula I need to find another way to accomplish what i am trying to do.
In the gray boxes I need a formula that will sum the amounts for each customer for each month. For example, the total amount that shipped to customer A in October is 180.4.
I will be applying this to a much larger amount of data, so please do not provide a formula that only works for the data supplied in this example. I will be continuously adding more info to my list over time and I want the count to automaticaly include the data when I enter it.
View 13 Replies
View Related
Aug 1, 2014
I have a list of Spid numbers and a service category identifying if it is a Water Spid or a Waste spid.
The Spid is split into 2 parts. The Core is the identifier and the Category states if it is a Water or a Waste spid.
If the 1st digit in the Category is a 1 = Water.
If the 1st digit in the Category is a 2 = Waste.
There may only be a water spid or a property may have a water and waste spid.
What I want to do is have the information on 1 row rather than 2 rows
I have data in this format
SPID
Core
Category
Service Category
100000000151
100000000
151
1
[code].....
and I need to convert it into this format.
Core spid
Water
Waste
100000020
100000020101
100000020251
I have tried IF(lookup) and it works for the 1st row but I can't get it to look at the 2nd row.My data consists of 400,000 plus rows
View 3 Replies
View Related
Jan 11, 2009
I need to work out how long the batten has to be so the roof sheets fit evenly, the measurement has to start from 1460mm and go up in increments of 80mm eg 1540mm, 1620mm, 1700mm and so on.
But the number has be closest increment of 80mm over the shed width if this makes sense, the size of the battens for 2400 width shed would be 2420mm but i need this to work out for any width shed not just 2400.
View 3 Replies
View Related
Dec 13, 2007
What I am trying to do is take entered data in a spread sheet, and convert the units within that cells.
I have several entries for data in this sheet. Here is what I want to do:
-I have 104 entered in cell B2
-I want to convert that reading (which is ºF) to ºC in that same cell
-I would like a button or selection from a drop down box to select Metric or Imperial
I want to do this so if the whole spread sheet is entered in metric, I can select a name or click a button to have all the data switch to imperial. I know I can do this with two sheets in the same file, but I am not sure if this is possible to do in a cell I entered the data in. Any help would be great. I am using Office 2003.
View 13 Replies
View Related
Jan 25, 2009
I'm wondering how to display the following cost model on a graph (this is a piecewise-linear cost model for some production company):
Cost per unit for 0-10 units: $1
Cost per unit for 11-20 units: $3
Cost per unit for 21-30 units: $5
Cost per unit for 31-40 units: $8
Fixed cost: $100 (this is regardless of the number of units produced)
Basically I'm looking to construct a cost vs units graph.
View 11 Replies
View Related
Jul 24, 2006
I have a spreadsheet that keeps attendance. Now I need to calculate the
units (1 unit= 15 minutes) the children are actual here. On a normal
schedule they are here for 16 units but if the are late the units get
subtracted. When entering the data, they would like to use letter instead of
numbers.
View 9 Replies
View Related
Sep 15, 2007
Refer to the attached sample workbook,
(Keep in mind that there is an error in the sample workbook; Im not sure how to remove and re-attach the sample workbook as this is my first day on this forum.)
Cell F19 should contain =D19*B19
Column 1- These values will not change and represent price/cost of each UNIT
Column 2- "UNITS" the quantity or number of items at column1 value
Column 3- "$ AMT" the total cost of UNITS at that price/cost, i.e. Column1*Column2
Im looking for a way populate the values in Column2 when, "NUMBER OF UNITS" AND "AVERAGE COST PER UNIT" are changed
Ideally speaking, As few units in one row as possible to allow for a good mix.
For example: What i don't want is $9000*86 for 774k.
If it helps: "AVERAGE COST PER UNIT" will always be a whole number rounded up to the nearest 1000.
I believe a Most Even distribution of units will work fine.
After the distribution/population of fields in column2;
D29 must equal F3
F29 must equal F7
I'm looking for something that will populate the values in D12:D27 while adhering to the two conditions above. Even when the Input at F3 and F4 are changed.
The values in "UNITS" represent the number of a specific cost item in inventory when added together do not exceed the "TOTAL COST OF INVENTORY". Depending on store location, the "AVERAGE COST PER UNIT" and/or the "NUMBER OF UNITS" will change. It will be used to help forecast how many of a specific cost item should be purchased based on the overall average unit cost without exceeding the budget or inventory space.
View 9 Replies
View Related
Mar 4, 2009
I have three columns. Lets assume i have One header row and 3 rows of actual data and the 4th row is for totaling column B values.
Column A is a col of "Ingredients", column B is the amount of the ingredient (from col A) used. The value is either in Oz or Lbs. Can be either. Column C is a yes or no column. If the value is Yes then i want to have the value in col-B included in my overall sum which is in the 4th row. If the value is No then i do not want the value in col-b (in that row) included in the overall sum.
Any ideas on how to do this?
Thanks.
david
View 10 Replies
View Related
Apr 3, 2009
i have been trying to write an Excel sheet in 2007
that can be given a random amount of (money) and show
me the best way to spend it.
Weapons:
Name - Power - Cost
1 - 10 - 20
2 - 20 - 40
3 - 40 - 80
4 - 80 - 160
5 - 160 - 320
6 - 320 - 640
So i have 40K to spend, i want to eneter 40000 into a box and it
will auto populate the number of units i can buy, always setting the weapon
#6 as the priority.
View 13 Replies
View Related
Oct 23, 2009
I have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
View 12 Replies
View Related
Nov 23, 2009
I have a simple spreadsheet that allows the user to enter a dimension in metric or inches. I want to display the other units in the adjacent cell. In cell A1, the units are "Metric" or "Inch" in a pull down list. In cell A2, the value is entered.
In cell A3 i want to show the value in the other units. So if A1 is Metric, then take A2 and divide by 25.4. And if A1 is Inch, then take A2 and multiply by 25.4.
Also, if A1 is Inch, then display 2 decimal places in A3, and if A1 is Metric, then display 3 decimal places in A3. Is this possible?
View 3 Replies
View Related
Dec 4, 2012
I have a column named length and values are in different units ie few values in mm, few in cm, few in m. i have to filter out columns having range from 9mm to 6cm. How to do this task.(10mm = 1cm and 100cm = 1m)
Consider sample data as:
4 m
8 cm
9 m
3 mm
9 mm
6 m
6 cm
3 cm
2 m
View 6 Replies
View Related
Apr 12, 2006
I'm trying to set up a spreadsheet that tracks total hours worked and total
units produced. Then I need to have a column that shows how many units per
hour were produced.
Currently, I have something like this:
Column A is in elapsed time [h]:mm
Column B is a Number with two decimal places
Column C divides Column B by Column A
However, I get strange results. For example:
Column A is 6:24:00
Column B is 13
Column C shows 120.00
13 parts in 6:24 hours should be something like 2.1666 parts per hour!
View 10 Replies
View Related
Oct 9, 2011
Can split a single cell within excel to two or three units of the single cell?
View 2 Replies
View Related
May 8, 2008
I need a formula that will tell me what % of the first 5 units sold are new, based on the dates provided. This is an example of the data I am working with. What i am looking for is a cell that will respond with .4 (meaning 40% of the first 5 units are new) ...
View 9 Replies
View Related
Mar 2, 2009
I have a formula to add the volume (units) for a customer. The formula is:
=E5+E10+E21+E31+E38+E52+E65+E69
Is there a formula that I can use instead of the one above that will find the customer number and automatically sum the units?
View 9 Replies
View Related
Jan 30, 2014
I am attempting to calculate a dollar value that is based on a number of units. Each unit has a different dollar value depending on how many units there are. for instance,
if the spreadsheet reports one unit, then I need to return $45
if the spreadsheet reports two units, then I need to return $65 or 1st unit at 45 and 2nd unit at $20.
if the spreadheet reports three units, then I need to return $ 75 or 1st unit at $45, 2nd at $20 and 3rd at $10
all subsequent units 4 and up need to add $10 per additional unit.
View 4 Replies
View Related
Apr 11, 2012
I am making an IF function that calculates and converts units, for example kg to g and g to kg etc.
This is the formula I typed in
=IF(E6=kg, ((F6/D6)*G6/1000), ((F6/D6)*G6))
When I evaluate it I get the #NAME error. What do I need to change to make it work?
View 3 Replies
View Related
Oct 1, 2013
I need to formula to covert duration between start date and end date to units below.
Start Date
End Date
Number of Month
Number of Years
Number of Days
6/1/13
8/31/13
[Code] .........
View 6 Replies
View Related
Nov 27, 2013
We are trying to work out a pricing model based on how many units we will produce. In production the price per unit will be really high when you produce a low quanity, and the price per unit will be lower with the more units you produce (but never reach zero). What we are trying to accomplish is to create a formula to build a pricing structure that accounts for this curve without having to price every possible scenario.
For example, if we have the following data where for 1 unit we charge $3 per unit to produce, for 5 units we charge $2 per units to produce, etc...:
1 units @ $3 per unit
5 units @ $2 per unit
10 units @ $1 per unit
What I need to figure out is how much it would cost per unit if we were to produce 3 units. I'm guessing it would be somewhere around the $2.40 mark give or take. Or say 8 units, would be something like $1.50 per unit.
Is there a formula that can calculate this? I've tried thinking of it as a moving average, or prorating the pricing.
View 2 Replies
View Related
Jun 26, 2009
I would like to build a Macro to delete units (ex: 10V --->10) of two cell ranges that are not beside each other and eventually automate it to graph these two ranges because I will be running samples and have to produce a graphs for each sample.
I tried the code below, but I can't figure out how to include 2 ranges without deleting letters in other cells in in between the ranges.
for ex: I want to delete the non numerical characters in the two ranges C3:C1000 and H3:H1000 and graph these ranges.
View 5 Replies
View Related
Jan 7, 2010
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
View 2 Replies
View Related
Apr 22, 2009
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
View 9 Replies
View Related
Mar 5, 2014
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies
View Related
Dec 21, 2008
I'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies
View Related
Dec 13, 2013
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies
View Related
Jun 13, 2014
I am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
View 7 Replies
View Related
