I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
Returning items selected from a ListBox. I have a Multiselect Listbox with 15 items. Additionally, I have a worksheet with 15 columns (each one corresponding to the 15 ListBox items). I'm looking for code that will do the following:
After a user selects values from the ListBox (can be more than 1, thus the Multiselect), I would like for "TRUE" to appear in row 2 of the worksheet for each column. (IE: Column A is for Bikes, if a user selects "Bikes" from the ListBox and hits a CommandButton, I would like for A2 to say "TRUE".
I have a listbox with several items selected. Is there a way to automatically show the selected items in the worksheet (as values in cells)?
View 8 Replies View RelatedI am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
Here's what I have so far...
[Code] ......
I have listbox of information set up to have a user choose several items. I want the items to then transfer to another worksheet. I am using the code I found here:
Private Sub CommandButton2_Click()
Dim lItem As Long
For lItem = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(lItem) = True Then
Sheet2. Range("A65536").End(xlUp)(2, 1) = ListBox1.List(lItem)
ListBox1.Selected(lItem) = False
End If
Next
End Sub
But it is only moving The first item in a column, instead of all the columns of information. What do i do to get it to move all the information??
When i tranfer my listbox content to sheet the selected item remain selected in listbox
Dim i As Long, j As Long
For i = 0 To Me.ListBox2.ListCount - 1
If Me.ListBox2.Selected(i) Then
j = j + 1
Worksheets("Workings"). Range("AA" & i + 2).Resize(1, 1).Copy Worksheets("Print").Range("B" & Rows.Count).End(xlUp).Offset(1)
ListBox1.Selected(i) = False
End If
Next i
The following code populates a forms' second listbox (Elements_lbx) with True. No amount of diddling (by me) can get the selected items from form's first listbox (Content_lbx) moved over to the second. (NB. the list box isn't the standard VBA listbox but an open source: ListEX from Marco Bellinaso.)
Private Sub CommandButton2_Click()
Dim lbx_Sel As Long
' loops through ListBox to test if it is selected
For lbx_Sel = 0 To Content_lbx.ListCount - 1
If Content_lbx.Selected(lbx_Sel) = True Then
Me.Elements_lbx.AddItem Me.Content_lbx.Selected(lbx_Sel)
'
'Clear the selected item
Content_lbx.Selected(lbx_Sel) = False
End If
Next
End Sub
i have a multi select listbox that i want to be able to remove the selected items in one hit.
i have not been able to convert code for removing single selected items and could not find a working example.
this is probley the closest though cos its removing items it plays havoc with the listcount
I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
changing two variables a various amount of times and running the same procedure and copying the resutls into another sheet. Seems like a perfect place for a macro. However, these variables can be chosen from a list that the user wants. So why not build in a listbox for each one. Now I have two listboxes one for variable A and one for variable B.
The procedure in theory goes something like this we change variable A from the base case and then run the procedure for variable B, get the results, then run the scenario again but changing only variable B abnd repeat. Then once, all of the variable B scenarios are done, I want to change the variable A and then repeat and so forth.
That is the background and my main problem at this point, is that have these values in two listboxes, I know how to do the for each loops and such, however, I do not know how to do them for values in the listbox.
How do I identify the values selected in the respective listboxes and then pull them so I only use them for the for each loop?
How to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........
I have created a custom Menu (excel add-in) to make my work easy in excel. My problem is to print only selected sheets from Workbook in one PDF file, for that I've created a Userform with 2 listboxes, add sheet and print buttons. In the first listbox are listed all the sheets and in the second listbox are the sellected sheets to be printed. What I've succeded so far is to print selected sheets, but it creates one PDF file for each sheet, only if I put my code in workbook and not in Menu add-in (.xla file). As PDF Printer I use PDF reDirect Pro v2.
View 8 Replies View RelatedHow do I populate a new userform from an entry selected in the listbox. The listbox only lists one item from the original table but I'd like to populate the new userform with related information from the same row.
I'd then like to save this information to a new sheet and store the original information on another sheet leaving the first sheet a table of information yet to be updated.
The attached workbook should make things clearer. The update button is the one in question.
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
Below is the code to look in a specified sheet and find the values in the row where the combobox value is found. These values that populate into the Listbox when a Combobox value has been selected, are in the same row as the Combobox value, but offset 20 - 29 columns.
All is good in this section of code.
The Listbox has 3 coulumns. It is populated as follows:
1st column is the header in Row 1 of the the columns
2nd column is the actual numerical values(minus another value offset 80 columns) in the combobox specified row, and
3rd column is the actual numerical value address in the combobox row.
Code:
Private Sub ComboBox1_Click()
Application.ScreenUpdating = False
If Me.ComboBox1.Value <> "" Then
Me.ListBox1.Clear
' On Error Resume Next
[Code] .......
The next code runs thwn the user double clicks a Listbox value. It basically enters the Combobox value and Listbox value to a sheet. All is good here, with the exception to placing the Listbox item address to the specified sheet cell.
For some reason i ALWAYS obtain the LAST possible address of the range of values (i = 20 - 29), instead of the actual item selected in the listbox.
Code:
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
With Sheets("DESPATCH")
.Activate
ActiveCell.Value = Me.ComboBox1.Value
[Code] .......
How to rectify this to obtain the correct listbox address ?
I have a global list in B column and I want to create a text about the list. If I put "1" in A column, I want my text to be on B11 for the selected items. So excel should do a loop for the selected range and combine the selected items in a new line and give me as an output.
You may see the picture Untitled 1.jpg
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
What I am trying to accomplish is the ability to insert a value into a cell if an option button is selected. If the option button is not selected I want there to be a different value in the cell. This is what I have so far:
Sub OptionButton2_Click() Range("F8").Value = "$299" End Sub
What I am having issues with is the "else" clause. I want the value to show $0 if the option button is not selected. I attached a screen shot for reference.
I need to count the total number of times 4 different values appear in a column. This formula works for one value:
=COUNTIFS(Source!$C:$C,$B5,Source!$J:$J,$L$3,Source!$L:$L,$H$1)
Where H1 contains the word Assigned. I need to also find and add to count for matches in I1,J1 and K1 which contain New, Pending and Work in Progress respectively.
I found this formula and it works great, but I need to count only items with black font. We use red font to identify lost items so don't want to count them as part of our inventory.
View 14 Replies View RelatedI have a user form containing a calendar. What I'm trying to do is that if any cells are selected in a range - D4:E83 - then I want to run the userform therein forcing the user to use the calendar and ensure the date is correctly formatted.
The userform is named frmCalendar.
I would like to have a userform activated when I select a specific cell "g77". I tried a code that I found while searching the forum but it did not work.
The userform name is ufMutualAid
I am not sure if it makes it any easier to write the code three times seperately or if I can put them together, but the same idea is needed for
L79 ufPersonnel
L81 ufApparatus
I have a worksheet with an inventory of items in cells in column A. I need to count the number of items listed in the cells in column B. I have data in about 1500 rows. The items in the list in each cell are separated with a space. Please see small sample below. I would normally do Text-To-Columns, but some of the cells contain up to 30 items.
Excel 2007
A
B
1
Grouping
Number
2
[code]....
A custom UserForm pops up when a cell is double-clicked. The form contains a ListBox that presents the user with a list of values to select. When the UserForm first pops up I want the item that matches the value of the activecell to be highlighted/selected.
View 8 Replies View RelatedI have some Worksheet_SelectionChange code that automatically calls a Userform when a cell is selected.
What I want to do is retrieve the data from the cell where the Userform is called from and enter it into a textbox on the Userform.
There are 3 other columns to the right of the cell that is selected.
If there is data populated there, I want this to be copied to the appropriate textboxes on the Userform too.
I have a worksheet that has a months worth of data on it. The sheet is divided into sections with each day of the month being given 10 rows. So day 1 of the month will occupy rows 1 to 10, day 2 rows 11 to 20 and so on.
In each of these sectors, I would like to have an editable tick list that displays when a certain cell is selected. For example in day 1, selecting cell A3 will display the tick box. If I need a tick list for each day, would I need to create a fresh userform for each day or is it possible to have just one form and have excel remember the setting.