Userform Listbox Rowsource Dependent On Textbox Value
Jun 12, 2013
I need to make an userform which can look up data from a sheet that contains a list of distributors and adresses.
I need to be able to search by:
1- postal code
2- postal code and product reference
Hence, I have 2 textboxes for inputing the postal code and the reference, and a listbox that I would like showing the distributors' names that are localized in the corresponding area and which did buy the product from us. Here's what my database sheet looks like:
Postal Code
Products
Distributor
Adress
[Code].....
What I don't know how to do is to have a variant Rowsource property for the listbox, according to the postal code and the product reference the user enters, plus I want one distributor's name to show only once in the case I'm only searching by postal code.
View 5 Replies
ADVERTISEMENT
Jan 29, 2007
Is there any other way to get data from sheet other than using rowsource because the data retrieved is going to based on the selected sheet's name since there are a lot of sheets .
example :
When i enter number 1234 inside the textbox to search, the data from cells in sheet 1234 will appear inside the listbox.
View 3 Replies
View Related
Jul 23, 2013
I'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
View 2 Replies
View Related
Feb 4, 2010
I spent so long time to fix this problem, but it seems that I can't go on. I have a simple question. How can I get the data from the UserForm and use it in the worksheet? Everything works fine, only the UserForm makes problems. Here is the
View 4 Replies
View Related
Oct 14, 2009
Why is it when i try adding items to my listbox it comes up with the error Permission Denied. Im using rowsource just to have a heading tho when i want to add items it come up with the error.
Note my headings are in "K2:M3"
Eg.
With Me.ListBox1
.ColumnHeads = True
.RowSource = "K3:M3"
End With
then i try adding an item with
me.listbox1.additem Test
i get the permission denied error.
View 4 Replies
View Related
Jul 13, 2013
I have a group of data within a worksheet that I would like to search through one column called "User" and display multiple results from a column called "Full Description" and place these in each row of a listbox on a userform.
For example the data on the worksheet would be:
User
Full Description
Bob
Text1
Tim
Text2
[Code] .....
On the userform I have one Combo Box in which you can select a user to search, and a listbox displaying the relevant data or "Full Description".
For example searching for the user "Tim" should return the following results on the userform:
ComboBox (Search Term)
Tim
ListBox (Results)
Text2
Text4
Text5
When the results are then displayed, the user can then select an individual description that opens another userform displaying further details of that transaction.
I have tried to sort the data within a pivot table, however struggled aligning the columns with the data, as you cannot place text values in the "Values" section of the pivot table.
I have managed to get it to a point like this however, which I think may be a start... I'm just not sure what to do next.
Pivot Table
Row Labels
Full Description
Bob
Text1
Text6
Tim
Text2
Text4
Text5
Mark
Text3
Is there anyway to use this data to fill my listbox? It would need to update itself every time a new transaction has been recorded, also the rowsource of each user may change. For example User "Tim" may gain an extra row on the pivot table, so I can't just name a static range and use that as a rowsource.
I would imagine I need to perform a Vlookup for the user, display any results in Column B, up until a new name is found in Column A?
View 1 Replies
View Related
May 6, 2007
I found that my listbox in userform cannot update automatically(instead it change to blank) when a new data is insert to the target cell which is rowsourced to the particular listbox. But when i close and reopen the userform, the data which i added just now appear in the listbox.I rowsource the listbox from its properties, the command are: 'sheet1'!A2:E5.
View 4 Replies
View Related
Jan 22, 2008
I have listbox with 1 column source range B6:B25
Some time I want to remove some items before print is there possible to remove such item from listbox as well as corresponding cell without deleting row
View 7 Replies
View Related
Apr 3, 2008
I have three listboxes and I set each of their row sources from code in UserForm_Initialize() event like so:
With Sheet1
lbxLanguages.RowSource = . Range("C2", .Range("C2").End(xlDown)).Address
End With
When I run the form, sometimes I see data in two of the three listboxes and the third has blank/empty rows; sometimes all three listboxes have only empty rows in them (i.e. correct number of checkbox squares displayed but no data in front of the squares).
View 6 Replies
View Related
Sep 20, 2006
I have a ComboBox(mnthComboBox) on a userform. I would like to populate the RowSource using VBA Code. I have searched this forum but have been unable to find what I need.
View 4 Replies
View Related
Mar 17, 2008
I have some problems in VBA Excel List Box which I want to rectify. See an attachment " listbox. zip" file
I craated a Userform and Seven List boxes in it. the following problems I am facing.
1) When I change List Box 1 other List Boxes do not show with related data.
2) List Box 1 and List Box 2 show their header others List boxes not. Why?
3) I have defined Names of all ranges. How Can I use it in VBA Coding?
View 3 Replies
View Related
May 6, 2009
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
View 9 Replies
View Related
Sep 25, 2013
I have a Listbox1 in which I was able to populate it with unique items (from column B in Programs worksheet) using a collection (that was a good achievement for me!)
Now, I want to populate a the Listbox2 with items (not repeated) from column C, BUT only if the correspondent value on column B is equal to listbox1.value.
[Code] .....
View 4 Replies
View Related
Feb 3, 2014
I have a form that an administrator will open to search for items needing approved (ie. status is "Submitted" and they'll be going in to confirmit). The datasource is a table. For these purposes I'll arbitrarily call it Table1 for ease. There are multiple columns in the table, and I'll set the column width to "0" for those I don't want displayed, so we'll call the columns to be displayed Col2, Col3, and Col22. There are two dependents, because Col2 is the Division, of which there are 3 (Central, East, and West). The administator will select their Division and the associated ListBox will display results for all locations having a item status of "Submitted". Col3 will be the branch name, and Col25 with be a total $ amount of the order. Cbo1 (ComboBox1) will house the Private Sub Change() for the macro after a division has been selected.
Thus far I have thought of using a loop such as:
Code:
Private Sub ComboBox1_Change()
For n = 1 to ws.ListObjects(1).DataBodyRange.Rows.CountIf ws.ListObjects(1).DataBodyRange.Cells(n,2) = Me.ComboBox1.Value and ws.ListObjects(1).DataBodyRange.Cells(n,25) Like "*Submitted*" ThenMe.ListBox1.AddItem = If ws.ListObjects(1).DataBodyRange.Rows(n).Value2End IfNext n
End Sub
I've got a mismatch in the the Value2 type for the .AddItem. Not sure how else to approach though.
View 7 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
Nov 17, 2013
I have a userform that has 3 sections. In each section are a number of text boxes which, following input of a value in the first text box in the section (master box), self populate with data from a spreadsheet.
This works apart from when I change the value of one of the first text boxes. Is there a simple bit of code that if on the change of the value in the master box will reset the 'dependent' text boxes to empty?
View 5 Replies
View Related
May 5, 2014
I have put together a user form with two ComboBoxes, one dependent on the other. The first box has a drop down menu from which the user selects a name, and the second drop down populates a list from a named range according to the user's selection in the first box. The code I used is as follows:
[Code] .....
This has worked so far, however, if one selects a name in ComboBox1 and then changes their selection (ex. Initially selects John Smith from the first menu, and then changes their selection to Mike Roberts) there is an error. I am not sure why - I think the issue stems from the 'Clear' function but I am not sure how to resolve it.
View 2 Replies
View Related
Nov 11, 2006
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
View 7 Replies
View Related
Jun 4, 2014
I am currently running VBA when ComboBox1 is selected ComboBox2 shows specific information based on lists in the spreadsheet.
Now I would like it if ComboBox2 showed "Business Improvement" then ComboBox3 will show information set in that list.
Also, my submit button isn't working and I can't find out what's wrong using the debugger
View 7 Replies
View Related
Jul 14, 2009
I'm a little out of my element(normally program PLC's). I have always been lucky on searching others programs and have been real successful at piecing them together to fit the application I needed. The current workbook I am working on for my supervisor will allow him to keep track of personnel's weekly job assignments. The workbook and userform work fine when just using one worksheet.
What i would like to be able to do is use the "assigned to" combobox be the indicator as to which worksheet the data is saved to. I have tried to do it several different ways but have been un-successful. Have spent the last two days reading and searching for a solution but have yet to find or understand one.
View 4 Replies
View Related
May 13, 2014
I have a listbox on userform1 with multiselect and i am trying to populate the selection into textbox1 on userform2.
View 6 Replies
View Related
Nov 14, 2011
I want to add the selected value from listbox to textbox.
View 6 Replies
View Related
May 10, 2012
I have a listbox set as multiselect that looks at a worksheet that contains in excess of 11,000 items. I would like a way to filter down this list by the entry a user types either via a textbox or some other way.
View 9 Replies
View Related
Sep 23, 2008
I am trying to write a code that will allow me to search a multiselect listbox. The listbox has 4 column. The first column is Manager's names. I want to search this column by typing the name in a textbox. The code I have will find the name, but the first record that matches appear at the bottom of the listbox. This is the code i copied from another website:
Private Sub TextBox1_Change()
'the change event runs each time the user
'types into a text box
Dim s As String
Dim i As Integer
s = TextBox1.Text
'Note the use of the ListIndex property of the ListBox
'If the ListIndex is -1 means nothing selected
'If 0 means the first item selected
ListBox1.ListIndex = -1
If TextBox1.Text = "" Then 'nothing typed
Exit Sub
End If
For i = 0 To ListBox1.ListCount - 1
'use the LIKE operator to compare
'convert both to Uppercase as well so case does not matter
If UCase(ListBox1.List(i)) Like UCase(s & "*") Then
ListBox1.ListIndex = i
Exit Sub
End If
Next
End Sub
Also I want to be able to copy the selected items in the fourth column to another worksheet.
View 9 Replies
View Related
May 23, 2008
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
View 3 Replies
View Related
Apr 26, 2014
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
View 2 Replies
View Related
