Transferring Line Of Data From One Tab To Another Using Formulas?
Jan 29, 2014
I am trying to have an entire line of data copied into another tab depending on the status of a claim. For instance, if the claim on Tab A has a column for its status and I enter approved, then the entire line is copied and added to the tab for all approved claims (Tab B). If I enter denied, I want it to go to a different tab (Tab C), and and if I enter pending, yet another tab (Tab D).
Basically i want to be able to look at Tab A and see a complete list of all claims but then be able to click to Tab B and see an list of all approved claims, and so on.
View 7 Replies
ADVERTISEMENT
Jan 5, 2012
I am in the process of transferring data from one workbook to another.
I am doing this simply by clicking on the cell where I want the data to be, typing "=", then clicking on the cell in the other workbook I want it to match. While there might be easier ways to do this, it isn't too terrible and my columns are not in the same order in the two workbooks.
The problem I'm running into, is when I click on the cell I want to copy over, the formula defaults to the fixed formula (puts $ around the cell name) and I want to be able to copy down the formula over multiple cells.
I can click on the cells and press F2 once then F4 three times to get the formula over to the desired non-fixed format, however, I have to do this for 12 different workbooks and on roughly 40 columns for each.
Is there a way to expedite the process or turn off this fixed-formula default?
View 2 Replies
View Related
Dec 22, 2009
I have a bunch of spreadsheets in one folder with several subfolders. On one spreadsheet, I have a bunch of formulas referencing another spreadsheet. This is an example of the formula: =C:UsersKatie DestktopMake Your Day Program8th Grade[Math 8,xls]Sheet1'!G2.
I am building this program at home, but then when I take the Make Your Day Program folder and put it on the J drive at my school, the formulas still try to reference my desktop instead of changing the formula to J:Make Your Day Program8th Grade etc.. Why? It is a pain to go through all the formulas and change them to reference the j drive because there are a LOT, and I have already done that once.
How can I ensure that when I transfer this program to the school drive, after the holidays, that the formulas will change to their new reference location?
View 2 Replies
View Related
Jul 27, 2006
How do I transpose formulas from a line to a colllumn?
View 12 Replies
View Related
Feb 20, 2014
I have a problem with 2 "IF formulas"
A B C
23:30 00:30 1:00 - =IF(B2>B2,A2-A2,B2+1-A2)
14:00 13:00 On Time -=IF(B3<A3,"On Time","Delayed")
My question is: - how to make the first line to show me Delayed. It is a problem with the time before and after midnight.
View 5 Replies
View Related
Feb 23, 2013
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies
View Related
Mar 30, 2013
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
View 1 Replies
View Related
Aug 20, 2014
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
vbaStk.JPG
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
View 1 Replies
View Related
Feb 23, 2014
I am brand new and I don't know a ton about macros and programming in Excel.
What I'm trying to do here in this attached spreadsheet is at the end of inputting my line, I want to hit the tab (marked in red to make it clear where) button in the cell and have it automatically create another blank line but keep the formulas the same.
Basically I just want to avoid having to right click and insert line and then drag the formulas column by column down which is difficult.
See attached : TEST2_2014 Sales & Commission Spreadsheet.xlsx
View 5 Replies
View Related
Aug 23, 2012
In VBA Excel transferring data from Excel to Access.
I want to know how to increment the [ID] for each value of the range. [ID] is the Primary Key.
I have tried "NULL".
I have tried adding "n=n+1" after the "for each" and "thisSQL = "INSERT INTO... VALUES (" & n & ",..."
VB:
For Each value In Range("D5:D" & Cells(Rows.Count, "D").End(xlUp).Row)
accDateSub = Cells(value.Row, 1)
accDescSub = Cells(value.Row, 2)
accSub = Cells(value.Row, 3)
thisSQL = "INSERT INTO [Table1] ([ID], [Date], [Desc], [Data]) VALUES ("[U]What goes here?[/U] ", #" & Format(CDate(accDate), "MM/DD/YY") & "#, '" & accDesc & "', " & accData & ");"
conn.Execute CommandText:=thisSQL
Next
View 1 Replies
View Related
Jul 29, 2014
I'm trying to print score cards from the scores sheet (two different worksheet pages). Some score cards (each score card is one page) will only have 3 players and some will have up to 5 players so I can't just go down the list and use a formula to transfer data line by line. I will set the score sheet up I just all of hole 1 players to be printed on a card and so on with hole 2-18 also I need First and Last names on the cards and possibly score total by the name.
Graphic1.gif
View 5 Replies
View Related
Aug 5, 2014
Itransferring data across two work books I have.
Every month I get sent sales figures of products, from now I have been typing in every sales figure which is long and boring. So I was wondering whether there is a way to make excel match the products on each workbook (mine and the one I get sent) seeing as there is a product number on both workbooks and then have excel automatically fill in the field I type manually which are quantity and value. So excel would see on the one workbook that product X has sold 10 units with 1000 value and then would go across to my workbook and fill that in the area I need on mine matching from the product code?
View 6 Replies
View Related
Mar 15, 2013
So I have a spreadsheet with a list of item codes and a subsequent excel sheet with corresponding item codes. I would like to match up the item codes and enter everything found between column E to L.
View 3 Replies
View Related
May 13, 2014
I need to alter this piece of code so that it extrapolates the data in the same row as the keyword and not from the column. The keyword i'm using is "N" and is found in the first column.
[Code] .....
I have also attached a copy of the workbook : 120514 KCS CLEANING MAY DATA CALLED.xlsx
View 5 Replies
View Related
Jul 2, 2014
I have a workbook, which is having many sheets but I am sending here two sheets only.
Please refer test file.
I want here a 'Add' button which transfer Column C,D,E,F's data to 'EOD' sheet's F,G,H & I. next time when I click 'Add' Button EOD'S f,g,h,I data should shift to j,k,l & m and calci sheet's c,d,e,f's data to eod's f,g,h,&I, and so on.
View 9 Replies
View Related
Feb 16, 2009
I am trying to get a macro to update information from attached sheet GTS807 to the Stock sheet. The code in Module 26 works only for the first line and will be very long if I repeat it for the 20 lines of the input sheet! Basically we need to copy the new stock balance from GTS807 column AA13 to AA32 to the individual corresponding product name on the stock sheet (Column E)!
View 4 Replies
View Related
Dec 17, 2009
I wanted to : when i write data on one cell (sheet A), i want to see the same i wrote into another cell (sheet B), thts very simple, i know, but when its in blank (Sheet A), in sheet B appears a zero.
I dont want to have zero, i want to remain blank as in sheet A.
i did in sheet B "='sheet A'!A117".
i am a noob in VBA, just beginning, and i am loving....
View 9 Replies
View Related
Jul 22, 2008
I have somewhat of a complex issue (at least i view it as one).
I have included a sample Excel Doc.
I want to be able to enter data into the spreadsheet titles LIST as i receive it. i receive invoices and checks and i keep a running tally. but i am trying to avoid re-entering the same data into the BREAKDOWN tab. but i need the data to go to the proper place in BREAKDOWN. The problem is that i have no idea how big the list will be and how many invoices i will be receiving. so i think new lines will needed to be inserted in BREAKDOWN when i add to the running total in LIST.
View 14 Replies
View Related
Mar 25, 2012
I'm looking to transfer data (added within the fields by the user) from a userform within a peice of software, to a different userform, in a different piece of software...
View 1 Replies
View Related
Sep 7, 2009
I'm entering some sales data on a worksheet named 'Sales'. Some items are sold on a 'sale or return' basis, and others are not.
What I would like to do is to have all items that are sold on a sale or return basis copied automatically into another worksheet named 'Sale or Return', along with some other data related to that sale. The data transferred would have to be: Date, Agent, Item, Units, Date of return. I would like the data to be transfered into consecutive rows in the 'Sale or Return' sheet. After some Googling I'm vaguely aware this may have something to do with VLOOKUP.
The challenge I'm having is that there may be one sale or return entry for every ten rows of data on 'Sales' yet I would like them to appear consecutively in 'Sale or Return'.
View 9 Replies
View Related
Jun 1, 2007
I am trying to combine rows of data, each 4 cells long from multiple worksheets into one master sheet. I need to know if there is an easy way to do this and also I would like to setup an Auto Sort if possible to automatically sort the rows by date.
The data that will be transferred is: Date, Amount, Description, and Company Billed. I have my workbook organized by a Vendor per worksheet and would like to have the data I enter inside the vendor worksheet to automatically transfer to the master sheet and sort by date.
View 11 Replies
View Related
Jul 17, 2013
We have database (attached here). I want to copy the name of candidates base on their Status to their designated tab. example Diana Longoria name will be copy to "Waiting" Tab and if I change the status to "Rejected" it will be copied to "Rejected" tab and remove name from "Waiting" tab.
View 12 Replies
View Related
Jan 15, 2014
I'm not sure that this is possible without VBA, but here goes.. My sample workbook has 3 sheets. 'Master' Sheet A contains fields that are to be completed manually as our sales people talk to prospective customers. Once that information has been input, I'm trying to find a way to have the contact information (columns B - L) to copy automatically to either (in this example) to sheets B or C depending upon the chosen category in Column A, Sheet A. An example is that the sales adviser inputs the information into sheet A and then gives each row of information a category, say B, which then copies the required fields into Sheet B, at the next available row.
View 4 Replies
View Related
Oct 25, 2013
I have a workbook with two sheets of sku numbers. One sheet has sku numbers and prices, the other just has sku numbers but some of the sku numbers on the second list have been broken out by sizes. I need to take the prices from the first list and transfer them to the matching sku numbers on the second including the ones with multiple of the same sku but with prices. Also, not all of the skus from the second list are on the first list so I only need to do the ones that occur on both lists. There are over 3000 on the first list and 14000 on the second. What is the fastest way to accomplish this.
I tried to sort so that all the sku's in both sheets are in the same order then copy and paste the price to the matching sku on the second sheet and then drag the price down through the sizes on the ones that have different sizes (not all of them do) but I know there must be a faster way.
For example:
Sheet one:
Sku Price
12345 $100
12346 $500
12444 $150
12347 $200
Sheet two:
Sku Price
12345
12345-5
12345-6
12345-7
12346
12444
12347
12347-5
12347-6
12347-7
View 7 Replies
View Related
Jun 29, 2014
What I am wanting to do is to transfer Names(Row B7:B160) to a different work sheet IF the Row next to it(C7:C160) is filled out with a time. I will be setting up a command button that once say 10 names have times next to it, this data then will transfer to another work sheet.
I have done below coding, however it will only transfer data in B7 and C7, if I try to add B7:B160 it comes back as Missmatch. Below is what I have done for the Command button.
Private Sub CommandButton1_Click()
Dim AdviserName As String, Time As Integer
Worksheets("Sheet1").Select
[Code]....
View 6 Replies
View Related
Feb 21, 2014
I have a userform with texts boxes and comboboxes. I have a button at the bottom of the form which when pressed I want the data from these text boxes etc to transfer to the next empty row in excel. Eg I want textbox1 to be in cell A2, textbox2 to be in A3 and so on. How I would do this?
View 5 Replies
View Related
Feb 27, 2014
I have a user form set up and the codes to transfer the data. However, when I select to transfer, the transfer happens ok but I am getting the following error message
"Could not set the value property. Type Mismatch"
When I "debug" the code is highlighted
View 4 Replies
View Related
Apr 8, 2009
I am attaching a workbook with two sheets 'PO' & 'Quote'
The data in Quote is not in right order. I need a macro to put the data in PO in appropriate fields. I am interested only in Unit, Unit Price, Par Description, part no. if any otherwise blank.
View 7 Replies
View Related
Jun 6, 2009
I have made a cash register in excel with a cell that counts the total of all cash coming in per day whenever you push the button with "payed". I have another sheet where there is a column with all the days of the year. What is the correct syntaxis for transferring the total cash to the cell next to the right date in the other sheet every time i push the "payed" button (am I making any sense...?). And is there a way to reset the total amount back to zero automatically whenever the day changes?
View 5 Replies
View Related
Jun 11, 2009
I have created a small input area which contains columns for the user to input a new piece of stock. When the data is in i want the user to click submit and for it to transfer into the set places on the stock page! I know this is possible as i have done it before but have been hitting a brick wall with it for a month now! I just cant remeber.
View 14 Replies
View Related