I am attaching a workbook with two sheets 'PO' & 'Quote'
The data in Quote is not in right order. I need a macro to put the data in PO in appropriate fields. I am interested only in Unit, Unit Price, Par Description, part no. if any otherwise blank.
I have a workbook with two sheets of sku numbers. One sheet has sku numbers and prices, the other just has sku numbers but some of the sku numbers on the second list have been broken out by sizes. I need to take the prices from the first list and transfer them to the matching sku numbers on the second including the ones with multiple of the same sku but with prices. Also, not all of the skus from the second list are on the first list so I only need to do the ones that occur on both lists. There are over 3000 on the first list and 14000 on the second. What is the fastest way to accomplish this.
I tried to sort so that all the sku's in both sheets are in the same order then copy and paste the price to the matching sku on the second sheet and then drag the price down through the sizes on the ones that have different sizes (not all of them do) but I know there must be a faster way.
For example:
Sheet one:
Sku Price
12345 $100
12346 $500
12444 $150
12347 $200
Sheet two:
Sku Price
12345
12345-5
12345-6
12345-7
12346
12444
12347
12347-5
12347-6
12347-7
I am in the process of transferring data from one workbook to another.
I am doing this simply by clicking on the cell where I want the data to be, typing "=", then clicking on the cell in the other workbook I want it to match. While there might be easier ways to do this, it isn't too terrible and my columns are not in the same order in the two workbooks.
The problem I'm running into, is when I click on the cell I want to copy over, the formula defaults to the fixed formula (puts $ around the cell name) and I want to be able to copy down the formula over multiple cells.
I can click on the cells and press F2 once then F4 three times to get the formula over to the desired non-fixed format, however, I have to do this for 12 different workbooks and on roughly 40 columns for each.
Is there a way to expedite the process or turn off this fixed-formula default?
So I have a spreadsheet with a list of item codes and a subsequent excel sheet with corresponding item codes. I would like to match up the item codes and enter everything found between column E to L.
View 3 Replies View RelatedI wanted to : when i write data on one cell (sheet A), i want to see the same i wrote into another cell (sheet B), thts very simple, i know, but when its in blank (Sheet A), in sheet B appears a zero.
I dont want to have zero, i want to remain blank as in sheet A.
i did in sheet B "='sheet A'!A117".
i am a noob in VBA, just beginning, and i am loving....
I'm entering some sales data on a worksheet named 'Sales'. Some items are sold on a 'sale or return' basis, and others are not.
What I would like to do is to have all items that are sold on a sale or return basis copied automatically into another worksheet named 'Sale or Return', along with some other data related to that sale. The data transferred would have to be: Date, Agent, Item, Units, Date of return. I would like the data to be transfered into consecutive rows in the 'Sale or Return' sheet. After some Googling I'm vaguely aware this may have something to do with VLOOKUP.
The challenge I'm having is that there may be one sale or return entry for every ten rows of data on 'Sales' yet I would like them to appear consecutively in 'Sale or Return'.
We have database (attached here). I want to copy the name of candidates base on their Status to their designated tab. example Diana Longoria name will be copy to "Waiting" Tab and if I change the status to "Rejected" it will be copied to "Rejected" tab and remove name from "Waiting" tab.
View 12 Replies View RelatedI'm not sure that this is possible without VBA, but here goes.. My sample workbook has 3 sheets. 'Master' Sheet A contains fields that are to be completed manually as our sales people talk to prospective customers. Once that information has been input, I'm trying to find a way to have the contact information (columns B - L) to copy automatically to either (in this example) to sheets B or C depending upon the chosen category in Column A, Sheet A. An example is that the sales adviser inputs the information into sheet A and then gives each row of information a category, say B, which then copies the required fields into Sheet B, at the next available row.
View 4 Replies View RelatedI have a user form set up and the codes to transfer the data. However, when I select to transfer, the transfer happens ok but I am getting the following error message
"Could not set the value property. Type Mismatch"
When I "debug" the code is highlighted
I need some sort of function which will automatically retrieve task data from one sheet and place under a heading in another based upon the month selected. But the complication to this is that i need is that i require the tasks project heading to be retrieved aswell.
View 14 Replies View RelatedLooking for the formula needed to transfer data from one tab to another just by adding a meal count. On the attached file for example:
When I add a meal count in D1 on the Fry Prep Board I would like column B to populate with the associated columns from the Fry Pars.
I just need the formula for one cell and I should be able to complete the rest, I believe it would be a VLOOKUP formula?
I'm loving these new formulas that i'm learning here and applying them to whatever sheets i come across to make my life easier at work...
So now i've created another worksheet, this one is to help my colleague who wastes atleast an hour everyday to generate a consolidated report of our bank accounts...
Now i've sorted out half of the report where he can give an overview of the position of cash flow on a daily basis.
Theres however 1 more addition i wanted to make to make this workbook absolutely perfect!
On sheet 2 (which is my consolidated report sheet) I want to add all the transactions that occur on a particular date from all the different bank accounts (Each account having a seperate worksheet)
I'm not sure if advanced filters can achieve this or not or even easier/short macros... Any tips/hints as to how i can achieve this would be awsome..
I've attached a sample workbook which has sheet1 for a bank account and sheet2 for report generation...
I want to add all the rows having "Clearing date" (column A) in Sheet1 to report date in Sheet2
..And this for all the account sheets i can add...
I am trying to find an automatic way to create a finished report format that draws information from a different sheet within the same workbook. The trouble I'm running into is:
The raw data consists of some lines without any data, and some lines with data. The purpose of the final report is to display only those rows with data in them.
I have a sample spreadsheet attached, with the first sheet containing raw data, and the second containing a rough Idea of what I'd like the final infomation to look like. Somehow this seems like it should be really simple, maybe doable with an if statement, but I can't figure out how to get it to just ignore the empty rows without skipping a row in the final doc.
it has been eye opening to say the least. I have a question however, I am in the process of creating a workbook of different things for my construction company and I am stuck. Is there a way that I can pull a cost code from a drop down and have whatever data is inputted into the cell to the right automatically transfered to a budget report (another sheet)? Example - Inputting time for my crews - select a code from the drop down list say for "concrete" Then I input the crews hours per day in subsequent columns and then sum it up at the final column. Can the sum of the hours worked doing "concrete" then automatically be transposed to the budget in the "concrete" section?
View 9 Replies View RelatedCurrently I have 15 Prepaid schedule sheets that get pulled together as lines in a detail sheet. The way I have the detail sheet set up currently is that I have designated 200 rows for each prepaid schedule sheet, and then I manually changed the sheet reference in the formulas every 200 lines or so, for each prepaid schedule account. One such formula looks like this:
=IF(OR(H11="",H11=0),"",IF(OR(LEFT('Prepaid Gnrl Ins'!A11,8)="Balances",'Prepaid Gnrl Ins'!A11="Variance"),"",CONCATENATE('Prepaid Gnrl Ins'!A11," - ",'Prepaid Gnrl Ins'!B11," - For month ending ",TEXT(Menu!$I$4,"mm/dd/yy"))))
The result of that formula is this: Beecher Carlson - 11/1/11 - 4/1/13 - For month ending 02/28/2013
The detail sheet also includes a formula to find values to be expensed. that formula is:
=IFERROR(IF(HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE)=0,"",IF(F11="","",HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE))),"")
I'm trying to shrink down the over all size of this detail sheet and I would like to be able to write code with the syntax:
IF {HLOOKUP of value in menu sheet, find in column 10 of active sheet and offset by 1 (row 11)} contains a value THEN run all formulas (examples above) and paste into detail page UNTIL value in column A contains "Balances".
After finding the word "Balances" the macro would move on to the next prepaid sheet and do the same thing.
I have 3 forms(3 sheets) with the same layout (fields) for data collection. I want to transfer the data from the 3 forms to a consolidated database worksheet. Every form needs to have its own rows of data. For example, if there are three forms for three divisions laid out as below:
BegBal Additions Subtractions Adjustments End Bal
xxxx xxxx xxxx xxxx xxxx
The resulting database worksheet should look as follows:
Division Beg Bal Additions Subtractions Adjustments End Bal
A xxxx xxxx xxxx xxxx xxxx
B xxxx xxxx xxxx xxxx xxxx
C xxxx xxxx xxxx xxxx xxxx
Sub MoveRecord()
Dim WSF1 As Worksheet ' Form 1 worksheet
Dim WSF2 As Worksheet ' Form 2 worksheet
Dim WSF3 As Worksheet ' Form 3 worksheet
[Code].....
I am writing a UserForm and only one of my comboboxes is correctly outputting to the assigned worksheet. All of the textboxes, radio buttons, and checkboxes are working properly. It is my first time designing a UserForm. Attached is the code - maybe someone can see the error that is allowing only cboq4d to be transferred to the worksheet (named DataBase).
Private Sub cmdClear_Click()
Call UserForm_Initialize
End Sub
Private Sub cmdOK_Click()
Call UserForm_Initialize
ActiveWorkbook.Sheets("DataBase").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select................
I am looking for the formula to auto copy data from Sheet 1 into Sheet 2 should it meet certain criteria. In this case the criteria would simply be a student name. I am looking to have different sheets automatically transfer different student's data to other sheets.
For example:
I have a first name column, last name column, and then 3 questions answered in sheet 1.
In sheet 2 I want it to look for any row with Daniel as the first name for example and copy his data over to sheet 2.
Is this possible?
Is it possible to transfer this data to a SEPARATE excel document? Just another sheet in the same document? Or not at all?
I am also running into an issue with google forms. I am trying to auto transfer incoming data from the google from spreadsheet into Sheet 2 automatically where I have it set up to auto sort the data the way I want. But the formula I am using is not auto updating as new data is added to the form sheet.
I am currently dealing with an excel sheet that I am using to track people that I have contacted over the phone.
I created a drop down box for a column titled "Contacted". Under this drop down I have included: "Yes" - I reached them; "YES/CB" - I reached them, but need to call back; "NO/LVM" - I did not reach them, but I left a voicemail; and "NO/NVM" - I did not reach them and I was unable to leave a voicemail.
My goal is to have several Sheets in this 1 workbook.
Question: How do I get the WHOLE row of data to transferred to a new sheet(s) depending on the selection I make, i.e. "Yes/CB" or "NO/NVM" ??? Make note: I would like the data to disappear from the original sheet when it is transferred to its new home.
The two sheets are...
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
I am trying to figure out how to update cost from a manufacturers price sheet in excel. I have one worksheet that has the manufacturer's part number and my current cost. A=item number B= current cost. on the second sheet is the same setup but my price list has roughly 3500 rows and the vendor price sheet is 23000 rows. Is there a way to automate the cost replacement by comparing item number and if they are the same replacing cost on sheet one with cost on sheet two?
View 6 Replies View RelatedI need to calculate data from one sheet 'Promotions' and paste/drag the formula onto the 'Summary Sheet'.
The paste/drag is important to include all data.
Trying to multiply [on sheet Promotions] 'NumberOfPromos' times (*) 'ProfitPerOffer' (using rows 1-8, let's say).
Then paste/drag it in its place on the 'Summary Sheet' in the 'Total Receipts' column.
I've been playing with =Promotions!$E$2:$E$8 * $J$2:$J$8 = 'Summary Sheet'!$F2
and things but cannot get it to work (I know I am WAY off base).
I've been working with Access and trying to duplicate a simple database in Excel.
Attaching a simple project example.
I have a database that has been created in Excel.
It has columns such as Permit #, Permit Date, Project Name, Contact Name.
I have to call on each of these projects, and I am trying to create a Lead Sheet that will make it much easier as opposed to having to go to the database, and handwrite the information into a lead sheet.
Such as there being one lead sheet per project. That way, I can just use the lead sheets as opposed to using the excel database.
I've seen it done with excel and word used together where each heading (permit #, permit date, etc.) was copied into a lead sheet essentially doing all of the writing for me automatically.
Any way to transfer the sheet protection from one worksheet to another worksheet via VBA.
Currently, the user selects a name from a drop down list, it unhides a workbook of the same name, copies from that workbook, and places the copied information in an area of the sheet with the drop down list. I would like the protection settings (in this case, selectivly unlocked cells to allow users to easily tab through and not make changes to data that should not be changed) to be copied with this information. Is this possible?
Excel (2007) user however I'm not very well versed with VBAs and Macros.
I have three sheets and on each sheet the first 5 columns (A - E) have the same title (all in row 1, frozen top row and with filters) there are other columns but I only need A -E to auto transfer.
Sheet 1 is named "Total"
Sheet 2 is named "Management Referral"
Sheet 3 is named "Health Assessments"
What I'd like is for any entry that goes into any row in both sheet 2 and 3 to automatically transfer to sheet 1, but only the information from columns A - E.
There will be dates (dd/mm/yyyy) in column A in each sheet and when transferred to sheet 1 they must be listed chronologically oldest to newest.
I also need all the information in columns A - E that transfer to sheet 1 to stay in their respective sheets.
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies View Relatedi'm trying to get data added in one sheet of a workbook to automatically be entered into another sheet. such as a monthly, Quarterly and Annual balance sheet.
View 3 Replies View RelatedI'm looking for a formula that will paste an entire row from sheet 2 into sheet 1 of the same workbook when only 1 cell is typed.
I am trying to come up with a property access log for my guards so when they enter a tag number from(sheet 2 column B) into (sheet1 column D) , it will auto fill sheet1 column C and E with the entries from sheet 2 column A and C.
In VBA Excel transferring data from Excel to Access.
I want to know how to increment the [ID] for each value of the range. [ID] is the Primary Key.
I have tried "NULL".
I have tried adding "n=n+1" after the "for each" and "thisSQL = "INSERT INTO... VALUES (" & n & ",..."
VB:
For Each value In Range("D5:D" & Cells(Rows.Count, "D").End(xlUp).Row)
accDateSub = Cells(value.Row, 1)
accDescSub = Cells(value.Row, 2)
accSub = Cells(value.Row, 3)
thisSQL = "INSERT INTO [Table1] ([ID], [Date], [Desc], [Data]) VALUES ("[U]What goes here?[/U] ", #" & Format(CDate(accDate), "MM/DD/YY") & "#, '" & accDesc & "', " & accData & ");"
conn.Execute CommandText:=thisSQL
Next
I'm trying to print score cards from the scores sheet (two different worksheet pages). Some score cards (each score card is one page) will only have 3 players and some will have up to 5 players so I can't just go down the list and use a formula to transfer data line by line. I will set the score sheet up I just all of hole 1 players to be printed on a card and so on with hole 2-18 also I need First and Last names on the cards and possibly score total by the name.
Graphic1.gif