I have already use excel web query, and set every 5 minutes auto update web.
And here is question , I want to use vba event to trigger when cell's value changed.
Unfortunately,
Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
This code didn't trigger successfully,I think that web query make cells
value changed didn't trigger the event.
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
[Code] ...........
I have a user entering text into a textbox on my userform. The textbox is linked to a textbox change event. Unfortunately, the event is triggered as soon as the user enters the first character of their entry. I'm thinking that the textbox change event isn't the most appropriate for this scenario. What would I need to do to trigger the code (of the change event) with hitting ENTER when finished?
View 9 Replies View RelatedIf no program (code) is running and Calculation is turned to ON, what expression could be placed into a cell that will change on its own that could necessarily and periodically trigger a change event subroutine. How can I trigger a change event when nothing is changing?
I have a situation where my code simply stops running so i need a change event to assess whether code is running (or not) and to issue a warning to the programmer that the code is, in fact, stalled. The change event subroutine has not only a warning system but a "timetorun" feature that will come back and warn again until the programmer can address the issue.
Unfortunately, I have to deal with this issue in a check and balance fashion because my many attempts to seek solutions to a stalled program (root cause) have failed.
I am working with a large legacy file/program which has a lot of issues. Foremost, and unfortunately this cannot be changed, is that all of the controls were placed directly on the worksheets instead of on Userforms.
I had previously posted code from the legacy file which may have been excessively complicated. So I edited my post to this simple example. Sheet1 has one textbox and one command button. Sheet 2 is blank.
If Sheet2.Activate is commented, everything works fine. If Sheet2.Activate is executed, then Excel crashes....
Does anyone no a way to trigger a macro by just using the enter key in a difined rage ("A1:A100") Not worksheetchange
View 9 Replies View RelatedOn my userform I have a frame. Within the frame, there are 6 option buttons. Can I trigger an event when when the user selects a different option button? I was expecting to see a Frame.Change method. But I don't. One solution is to insert code on each of the Option Buttons Change methods.
View 2 Replies View RelatedIs it possible to write an event trigger macro to format cells? Let's say I want to add a new information to the row which is after FinalRow. Can I force excel to detect the input and then format that new row as previous rows or something custom?
View 4 Replies View RelatedI am working with a large legacy file/program which has a lot of issues. Foremost, and unfortunately this cannot be changed, is that all of the controls were placed directly on the worksheets instead of on Userforms. The actual code from the legacy file is excessively complicated, so I created this simple example. Sheet1 has one textbox and one command button. Sheet 2 is blank. I want to be able to click the command button or use the Enter key on the command button, to trigger the Click Event. Clicking works fine. When using Enter, if Sheet2.Activate is commented, everything works fine. If Sheet2.Activate is executed, then Excel crashes.
Private Sub TextBox1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Dim bBackwards As Boolean
Select Case KeyCode
'Only look for tab, return, down arrow, up arrow
Case vbKeyTab, vbKeyReturn, vbKeyDown, vbKeyUp
Application. ScreenUpdating = False
'Do we need to go back to previous control
bBackwards = CBool(Shift And 1) Or (KeyCode = vbKeyUp)
If bBackwards Then TextBox1.Activate Else CommandButton1.Activate
Application.ScreenUpdating = True
End Select
End Sub
Private Sub CommandButton1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Dim bBackwards, bForwards As Boolean
Select Case KeyCode
Case vbKeyTab, vbKeyReturn, vbKeyDown, vbKeyUp
Application.ScreenUpdating = False...................
I am trying to write a worksheet_selectionchange macro in which the change is initiated only when certain cells are changed (B6:B9 and X9). I do not want the change to be initiated when any other cells on the worksheet change. B6:B9 and X9 are drop down boxes and the values within the drop-down boxes is variable.
View 3 Replies View RelatedI am trying to create a trigger event that opens an email when a particular row is altered. This all worked fine, until I tried to take it a step further and insert information from the spreadhseet into the email aswell.
I receive Argument not optional.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 10 Then
Call GenerateEmail(Target.Address)
End If
End Sub
[Code]....
I have a project report, which is user-configurable, allowing the user to customise the data that is displayed based on a number of parameters.
To ensure the report always prints neatly (the number of visible columns and rows varies, depending on the above parameters), so I have a macro that dynamically sets the print area of the worksheet.
At present, I call the macro from the workbook.beforeprint event, which works fine in terms of printing. Ideally however, I would like the macro to be called when CTRL+P is first pressed - i.e. the resulting 'print screen', containing a preview of the print out should reflect what will subsequently be printed, when the 'Print' button is then pressed.
I am not sure if this makes sense (Excel 2010 and 2013 are different from previous versions).
So, I have a worksheet with a bunch of combo boxes. The code for the worksheet is below. The issue I'm having is that anytime I drag and drop a cell anywhere on the page, every single control on the worksheet triggers. VB runs through all the code on the sheet, TWICE(I used the debugger extensively trying to find a solution), and causes dozens of successive re-calculations of the entire workbook, which has a couple of tables. This happens on any cell drag-drop on the worksheet, or when I click the command button on the screen.
I have no clue what is causing this. Even more bizarre, it seems to trigger a custom function which is located in a separate module, and isn't even utilized on the worksheet in question. I guess this is because it makes the whole workbook re-calculate?
how to incorporate the query AutoRefresh event to my code with no success. I'm just a beginner with VBA and I don't know how to use the code. Here is the link that explains how to use the Query AfterRefresh event... http://support.microsoft.com/kb/213187
Public diropen
Sub AutoRefresh()
Application.DisplayAlerts = False
Application. ScreenUpdating = True
diropen = "C:Documents and SettingsjsotoDesktop"
Workbooks.Open diropen & "Test.xls" _
, UpdateLinks:=0
ActiveWorkbook.RefreshAll
ActiveWorkbook.Save
Workbooks("Test.xls").Close
End Sub
As you can see, it's a simple code to open the workbook, refresh the linked query (from Access), save and close it.
I run a web query from [url] to import the latest currency rates into Excel. I refresh the data every minute. Every time Cell B19 changes I want to run the following
If Cells(19, 2).Value > 1.27 Then
MsgBox "buy"
End If
I tried putting that code in the Worksheet_Change event but it only works if the user physically changes the cell, not if it's changed by a web query. So how can I run code that triggers when a cell is changed by a web query?
I have the code below that is two separate activities and I want to change the second activity from a cell trigger (Set KeyCells = Range("K42:AD42")) to a button trigger. I need to first to remain unchanged.
I'd be ok if this was just one macro that I could assign to a button but because its two and I need to write the second's to clicking a button I'm over my head.
Its occured to me while writing this that because it'll be a range of buttons I'll probably need to make each one an individual code? Is this the case? If so I may have to just keep this as it is.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.
My query is this
WEB
1
http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12
Selection=15
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
I'm trying to query a query in Access 2003, from Excel 2003.
The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]
The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]
I use the following VBA code in Excel to excecute the query:
With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
Destination:=ThisWorkbook.Worksheets(cDataSheetName).Range("A1"), Sql:=strQuery)
.RowNumbers = True
.Refresh BackgroundQuery:=False
iResultRowCount = .ResultRange.Rows.Count
End With
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.
I created an Ms Excel Database Query to bring in data from MS Access. (versions 2002 of MS Excel and Ms Access). The query works fine initially. I can right click, choose Edit Query and change my criteria. Results are returned almost instantly.
My problem is that, once I save the workbook, or autosave happens, I get an error when I right-click to Edit Query: This query cannot be edited by the Query Wizard..
how to trigger a message box?
if i type TP123 in cell A1 i want it to trigger a message box with a comment
I am preparing a list of calibration items that require yearly calibrated, how can I set the date and prompt me example 1 month ahead when the item is going to due soon.
View 3 Replies View RelatedI have attached a sample work book.
What I want to achive is the colouring of the cells in columns A-L using the trigger of the "Y" character in colums J-L
So when a Y is put in column J the cells to the left and including column J change to green. Then when a Y is put into column K the cells to the left and including K turn yellow. Finally when a Y is entered in column L the cells to the left and including L turn the lovely shade of Pink. It is possible the process will go from a Y in column J to a Y in column L mising out column K but I don't suppose this will matter.
I used to have it working in office 2003 to a fashion but have not yet got my head around 2010
I want to trigger a macro that refreshes a pivot table but I only want to trigger the macro after 15 seconds. The reason is that I am pulling the source data from access mdb so I want only to refresh the data once the data is pulled.
View 3 Replies View RelatedHow do I amend this formula to have it only trigger on a certain month.
=SUMIF(C:C,1,F:F)
Date Description CatCost feesTotal Balance
20/02/12 PayPal Credit 10$0.10 $0.00$0.10 $0.10
20/02/12 PayPal Credit 10$0.01 $0.00$0.01 $0.11
26/02/12 Payment 1$174.69 $4.49$170.20 $170.31
I need it to look at what month it is and then the category.
Is it possible to trigger a macro on a condition like this?
If date more than 1 week arrange date in sequence order.
I am having trouble trying to get an MS Access Query to run from MS Excel automatically.
I am trying to create an automated trigger in MS Excel that will automatically run my Access query by the times I specify in my statement.
For example: I need to run a query in Access at 9am, 12 pm and 10pm, that's it, but I believe I need to do it via Excel, I don't want the data returned to Excel, I just want Excel to execute the query at those specific times!