Unlimited Rows While Creating Pivot Table

Sep 18, 2013

I have the code listed below where i keep getting a compile error. This is from a You Tube (Pivot Macro - Episode 1211 - YouTube) episode 1211. why this would not work? Basically trying to set up a macro that creates a Pivot Table that will always have the same number of columns, but each set of data will have different number of rows.

ActiveWorkbook.PivotCaches.Create(SourceType: xlDatabase, SourceData:
DataSheet & "!R1C1:R" & FinalRow & "C37", Version: xlPivotTableVersion14).CreatePivotTable
TableDestination: NewSheet & "!R3C1", TableName: "PivotTable2", DefaultVersion: xlPivotTableVersion14

View 5 Replies


ADVERTISEMENT

Need Conditional Formatting For 2 Columns, Unlimited Rows.

Mar 10, 2009

Im having a little trouble with this, Im dealing with a list, and I need to change the colour of rows, based upon a value in 2 different columns.

Im close, but cant quite get it.

Basically its like this, the data in these cells will only ever be either; blank in one or the other, both are never blank. or a number up to about 3 or 4, usually 1 or 2.

View 2 Replies View Related

Creating Pivot Table In VBA

Mar 27, 2012

I have the following code to create a pivot table in VBA

Sheets("test").Activate
Dim data As Range

Set data = Range(Cells(1, 1), Cells(1, 1).End(xlDown).End(xlToRight))
Set pt = ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:="data").CreatePivotTable(TableDestination:=Sheets("summary").Cells(1, 1), TableName:="ItemList")

When I run this I get the error message Runtime error 1004: Reference not valid.

There is something in the "set pt=....." that it does not like.

View 9 Replies View Related

Creating Pivot Table

Feb 16, 2009

I would create a field in Access that would have the Names of the Counties (for my Row Labels) and I would create a field that would contain Years (for Column Labels) rather than using each individual date from my database. I want to be able to do this on the run in a Pivot Table.

For my Row Labels I am using the Municipalities in Wisconsin. Each one is assigned a number such as: 67-251, 67-015, 67-123. The "67" identifies the County and the "251" or "015" identifies the City, Town or Village. We need to use the whole number for the Rows but we only want to use the first 2 Digits to sort by the County. 67 is Waukesha County as is 40 Milwaukee County. I want to total the county's using the first two digits of their name. The field is called "SC" and it's a 6 char text field.

For my Column Labels I have many different dates that span a period of about 15 years. I would like to only use the Year for my Column Labels. And that year would accumulate all the dates for that County for the year I want to use..

In the end I would like to be able to get a Count of Permits for each County by Year. I would also like to be able to specify only certain years that I might want to see data for. Every time there is a date in the "First" field that is a count one home for the "SC" field.

I used to be really savvy with Quatro Pro, most people don't even know what that is anymore. In that program I had a line of text where I would enter the criteria that I was interested in for my Table. Such as 51, 40, 45, 60, 67 would be the counties I want to use. 2000, 2002, 2005 would be the column values I want to use.

View 9 Replies View Related

Creating Pivot Table Format?

Jul 21, 2014

I have a table (attached example with only a SMALL part of all data) I would like to transform this into pivottable format without copying and pasting. In row 2, all of the numbers pertain to years. Column B has the number of years in force for each property account (Column A). I

View 2 Replies View Related

Creating A Pivot Table Using A Macro

Mar 23, 2004

Creating a pivot table using a macro ...

View 9 Replies View Related

Creating Pivot Table From Multiple Sheets

Jan 15, 2014

I am trying to create a single pivot table using data from multiple sheets (one per month). I am trying to summarise the headcounts (count of assignment number) by month in a single table and then be able to select single months/areas or combination of months/areas in the same way as a single sheet pivot table. I have managed to get the table part way there but it’s not counting the assignment number and my Jan data is not appearing (see attached). How do I fix this? (I have only used 5 months of year in example due to the large file size) Alternatively is there a different or better way to this other than pivot table?

View 2 Replies View Related

Pivot Table Error When Creating A Macro?

Jul 22, 2014

In creating a macro and creating a pivot table as one of the first steps, I get this runtime error in visual basic:

ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"original working!R1C1:R1000C13", Version:=xlPivotTableVersion14). _
CreatePivotTable TableDestination:="Sheet4!R3C1", TableName:="PivotTable2" _
, DefaultVersion:=xlPivotTableVersion14

View 5 Replies View Related

Creating A Pivot Table With Multiple Sheets

Apr 23, 2008

I am trying to create a pivot table using multiple sheets. I looking for some code that will replace the "consolidated ranges" in the Pivot Table Wizard. I am looking for code because I am writing a macro that will create a different number of worksheets in the Workfile, depending on which dataset I use. i.e File 1 may have 75 worksheets, whereas File 2 may have 120 worksheets. '

The ranges on each of the worksheets will be the same. Range("A2:Av48")

View 9 Replies View Related

Getting Run Time Error 5 When Creating A Pivot Table

Jun 11, 2008

I am creating 10 pivot tables for data in one worksheet and putting them in a separate work sheet. i used the macro recorder but the cod eit worte stop at this line ...

View 9 Replies View Related

Creating Correct Pivot Table Data Fields In VBA?

Aug 1, 2012

Basically I've jumped straight in and have tried to recreate a report I need to produce which requires a pivot table. I have managed to create the code I need to produce a pivot table in a new sheet with all of the headers available for analysis. Where I'm struggling is in getting the pivot to show the datafields correctly.

The list that I am creating the pivot from has about 30 headers. 20 or so are analysis fields with the remainder being various figures; monthly plan, monthly actual, monthly variance etc..

The pivot table I need to create needs all analysis fields available to the end user for manipulation, which I have managed to do. I have created rows for sales areas, also with no problem. It also needs the above plan, actual and variance fields in columns and as datafields. This is where I'm having trouble. When I create the pivot manually it ends up with 1 row and 3 separate columns with summed data in each. I have checked the VBA code, copied it and used it again. The pivot table comes out with 1 row but with the data fields stacked one on top of each other. Any minor alterations that I can think of, (for example adding a position = 1, position = 2 etc.), either creates a chaotic looking sheet or an error.

I've checked various posts on pivot tables but am having trouble understanding the way in which I can correct this. Is there a straightforward command that I'm missing? Do I need to start declaring variables for pivot items?

View 5 Replies View Related

Creating Custom Pivot Table Report Filter

Aug 8, 2012

I was wondering if it is possible to create a custom pivot table report filter? I would like to take an existing pivot table report filter and manually add values into it. I would like to do this because I have multiple pivot tables, some with the same values and some with different values and I have a VBA code from Contextures that applies a mass filter to all fields with the same name. So if i could manually add values into one report filter, I could filter from one location and have all my pivot tables update at the same time if they contain the value that i would like to filter by.

View 1 Replies View Related

Create Report Using Power Pivot While Creating Relationship Between Linked Table?

Apr 24, 2014

I want to create a report using power pivot while creating the relationship between the linked tables, power pivot is throwing error "The relationship cannot be created because each cilumn contains duplicate values. Select at least one column that contains only values"

View 1 Replies View Related

Application Defined Or Object Defined Error When Creating A Pivot Table

Oct 1, 2009

I keep running into this error when I try to create a pivot table.

The debugger highlights the following line:

View 4 Replies View Related

Using VBA To Hide Rows In A Pivot Table

Sep 26, 2007

Sub Hidesingles()
For i = 5 To ActiveSheet.UsedRange.Rows.Count
For c = 3 To ActiveSheet.UsedRange.Column.Count
If Cells(i, c) .........

View 9 Replies View Related

Pivot Table Can't Handle 64,000 Rows

Nov 4, 2008

I have 63,893 rows and 3 columns (Parents, Component and Qty) in a table. This would be typical for a Bill of Materials showing the Qty of Components in a Parent. A lot of Components are common to a mumber of Parents.

In total I have 4,259 Parents and 10,904 Components making up this 63,893 rows in my table.

The problem is that neither the Pivot function in Excel nor Access will handle it, least not the way I'm doing it - the bog standard way ! I just get the "Excel cannot complet this task with available resourses......" message.

Anyone any ideas how to get a Pivot or something resembling one so that I end up with the Components as the Row Header and the Parents as Column Headers.

I know I could go in and manipulate the data but I want to be able to create this Pivot like report every month or so without having to reinvent the wheel each time.

View 9 Replies View Related

Sorting Rows In Pivot Table

Jun 2, 2006

I have a pivot table and i am trying to display the rows in order of relevance. I have a bit of code that will sort the rows into the order I want them which I have included. My problem is that sometimes I will have rows that will not be there, If position 3 doesn't exist I would expect it to display 1,2,4,5 but instead I get an error message.

ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Nomination") _
.Position = 1
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Full") _
.Position = 2
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Equal") _
.Position = 3
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Target") _
.Position = 4
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("None") _
.Position = 5

View 2 Replies View Related

Dynamic Rows For Pivot Table

Nov 16, 2006

I wish to create a Pivot Table. It is based on source data with fixed columns (A to W) and dynamic rows. The following is my

Dim WS As Worksheet
Dim DataRange As Range

Set WS = ThisWorkbook.Worksheets("sheet1")
DataRange = Range("A1:W1", Selection.End(xlDown)).Select

ThisWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=WS.Range(DataRange)).CreatePivotTable _
tabledestination:=Sheets("sheet2").Range("A1"), tablename:="PivotTable1", defaultversion:=xlPivotTableVersion10

Dim PT As PivotTable
Set PT = ThisWorkbook.Worksheets("Sheet1").PivotTables("PivotTable1")
PT.PivotFields("Type of Work").Orientation = xlPageField
PT.PivotFields("Profit Center").Orientation = xlRowField
PT.PivotFields("B/(W) CTD Net Rev").Orientation = xlDataField

Because I'm going to use it in my work, it must be reusable. And every time I use it, the numbers of row are different. Therefore, I made the source data into a dynamic range. The range changes when rows change. However, problem always appears in the following line:....................

View 2 Replies View Related

Remove (blank) Rows From Pivot Table

Apr 15, 2014

Pivot tables. I have a dataset from which I make a pivot table. In row labels I have 4 different columns of data below each other.

Level 1
Level 2
Level 3
Level 4

In some cases the data only has three levels, for example:

Earth
Europe
Germany

In other cases it has four levels of data:

Earth
Europe
Germany
Berlin

If I make a pivottable it will give 4 levels for all items. In the first case I mentioned, the data will state:

Earth
Europe
Germany
(blank)

Is it possible to remove the (blank) row as it does not provide any useful information..

View 3 Replies View Related

Pivot Table On Data With Empty Rows?

Jan 28, 2014

I am writing regarding the Pivot table creation with data which contains empty rows.

Recently, I work on a project with a data which contains empty rows. I will attach the file for sample to see what sort of data contains my sheet.

As you can see the data is divided according to some criteria, and it is constantly updated by users. sometimes a new criteria is added at the end of the sheet, that is why I need to create a pivot table, to be able to just changing Source, to update the table and manipulate table in order to get desired results, but I can't remove these empty rows rom the data as far as some unexperienced users have to fill the information and it is more comfortable to have the data separated from each other for them.

However, when creating the Pivot table on this type of data, the pivot table will include the blanks Row Labels there.

View 4 Replies View Related

Pivot Table, Show Empty Rows

Feb 16, 2009

In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total

When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.

What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?

View 4 Replies View Related

Conditional Formatting Rows In Pivot Table

Mar 25, 2014

I have a pivot table which shows below... I need to set up a conditional format to highlight the row where all fields are "0"

Company
Deals
Opps
Days since Deal
Days since Opp
Days since Meet

Co 1
1
7
80
20
20

Co 2
0
0
0
0
0

Co 3
1
4
30
30
28

Co 4
3
3
30
30
37

View 1 Replies View Related

VBA Pivot Table With Unspecified Number Of Rows?

Mar 21, 2012

I'm new to using VBA and have been recording macros and then trying to edit them where I need to and using Google to get the answers that I need, however I have hit a snag when I create a pivot table using my current macro.

The data sheet that I am creating my Pivot Table from will always have a different number of rows from week to week, but I am unsure of how to code this into my macro. When I recorded this, I used the range A1:S10000, which gives me (Blank) as the last row in my pivot table. change my code so that it only selects the data rows to stop these blanks appearing?

Code:

'Pivot Table DATA Tab to show Call Out Times for all Centres in file
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"DATA!R1C1:R10000C19").CreatePivotTable TableDestination:= _
"PIVOT!R3C1", TableName:="PivotTable1", DefaultVersion:= _

[Code]....

View 5 Replies View Related

Removing Data Rows From Pivot Table

Jul 12, 2012

I have a workbook with a Pivot Table full of user data and security reports. The table is structured in a way that shows, numerically; each username and how man roles are assigned. I need to remove the username/row combo's that are listed as 1 or less. Obviously if I simply highlight the fields I want to delete it won't work. How would I go about removing such rows?

View 2 Replies View Related

Pivot Table - Keep Only Rows Matching Criteria

Jul 21, 2014

adv bar

a11 b3
a2 b3
a3 b5
a4 b6
a5 b8

I have a pivot like the one above. I want to keep only the rows if "bar' falls within a range. So in a certain range (say d2:d7) I set the criteria for "bar". Is there a way to tell the table to keep only the rows, if the "bar" value can be found in d2:d7?

View 2 Replies View Related

Pivot Table Columns/rows And Subtotals

Oct 13, 2009

attached Pivot Table. There is a section, which I've marked, that shows how I want my Pivot Table report to look. I've had Excel 2007 kick me out a number of times when I've tried to filter and shift rows and columns to accomplish this and areas are frequently grayed out. Can someone please assist?

I'm attaching a file rather than going into a lot of detail here because I think a visual is easier here. The raw data, my attempt at the Pivot Table and my desired outcome all show on the same tab.

View 5 Replies View Related

Excel 2010 :: Pivot Table Reference Is Not Valid When Moving Data And Pivot Table Together?

Mar 19, 2013

On a worksheet, I created:

- a list of data
- a pivottable based on these data

When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.

This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.

View 3 Replies View Related

Refreshing Pivot Table Fails To Reorder The Rows

Mar 25, 2014

I have a workbook containing many pivot tables. When I create a pivot table everything works fine. When I close the workbook, reopen it, and refresh the pivot table, the new data will appear at the bottom of the table instead of being inserted in the proper row in the table. Since the table is no longer in sequential order my VLOOKUP functions don't work properly. What do I need to do to get the already established pivot table to refresh properly?

View 6 Replies View Related

Counting Same Id In Rows And Sum Number Of Hours For Id In Pivot Table?

Jun 26, 2012

I have a column C which list Unique ID and this ID can be repeated several times in Column C. For each row the Unique ID has a value in Column D of how many sick hours are taken. I would like to create a pivot table which would provide a count of the Unique IDs and the total number of hours for the Sector in Column A.

Q1_Sick UnCertified 01042012_25062012(1).xls

View 10 Replies View Related

Copying 30 Rows At A Time From Pivot Table Into New Workbook?

Oct 30, 2013

I am using a Pivot Table to search for keywords in a subject line and it will display results if that keyword appears in the Pivot Table.

What I want to be able to do is copy 30 cells of that Pivot Table at a time into a new Workbook. All that I want to copy is Column A(Case Number) and Column B(Subject Line) of the Pivot Table.

Example:

Total Pivot Table data is 1000

I search for "Crashing", this will display 100 records

I want to grab the first 30 records and copy them into a new workbook

I want to grab the next 30 records and copy them into a new workbook

I want to grab the next 30 records and copy them into a new workbook

I want to grab the remaining 10 records and copy them into a new workbook

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved