I have a dropdown list for data validation on the "display" tab. The dropdowns come from a named range on the "Parts List" tab. When you select a part from the data validation list on the "display" tab it displays the data along the same row from the "data" tab. What i am trying to do is create the logic that will allow it to also display the information below until it hits a new part.
For Example:
If I choose "part1" in cell A1 dropdown list on the "display" tab, it will display "a,1,2,3,4" from cells A3 to E3 (this data comes from "data" tab cells B1 to F1). I also want to include the information in the rows below until it hits a new part. The number of rows may vary. Something along the lines of IF(A1) show B1 to F1, then if A2=blank then show B2 to F2, then if A3=blank display B3 to F3, etc. I need this to be dynamic, if the cell below is blank then display row info.
product-id fecha entrega SUM of quantity Q-NATA90 22-jun 15 13-jul 15 03-ago 15 Q_nata is product code (fields) 22-june, etc are the dates of the individual orders (fields) 15 is the amount of each order (data)
I tried to set an offset function in a cell outside the table that, refers to the first DATA cell (upper 15) and returns the date of the order, like this:
I'm using a code to search some information in a pivot table and copy the value in the cells with offset(0,1) and is very very slow, I tryed another method with the using of Find but isn't working: error message: missing object in the with cycle.
Here is the working code:
Dim DataFine, DataInizio, UltimaRiga, Gg As Date Dim NomeMacchina, Plant As String Dim Cl As Object Dim Pr As String Application.ScreenUpdating = False
[Code] .......
Here is the code who doesn't work
For i = 6 To 500 Giorno = Sheets("OEE03").Cells(i, 2) With Sheets("01") Pr = Range("A5:A500").Find(Giorno).Offset(0, 1).Value Sheets("OEE03").Cells(i, 9).Value = Pr End With Next
if I use this code on a normal sheet it works but when I try to use it on a Pivot table fields give me always the error message.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria) Search range is: B1:D400 (for example) Cell B40 = samuel C40 = Driver D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1() Range("B1:D400").Select Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False End Sub
Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
I'm trying to lookup a string in a column from another sheet and than return the row on which that string was found. I have two files, one in which my OFFSET/MATCH worked and another in which they didn't work properly.
My problem is this: I have multiple instances of a string in a column and i want to get all the info on that string (the rest of the columns). Let me explain in examples.
In column A on Sheet 2 i have
4 2 4 2 3 4 5 3 2 2 2 2 4 1 3
I need to have in Sheet 1:
4 2 4 4 1 3
Where the first 4 (bolded) is the reference value.
In sheet 1 i have a column A2 which is the reference. In column B2 i have =MATCH(A2;'Sheet 2'!A1:A16051;1) - this worked on a file but returned a bad value on the other (donno why)
In the second file i used =MATCH(A2;'Sheet 2'!A2:A10552;0)+1 which returned the good value.
For the second value (row 4 1 3) i used =IF(OFFSET('Sheet 2'!A1;B2-2;0)=A2;OFFSET(Sheet 2'!A1;B2-2;0);0). This worked well on the first file but didn't work on the second.
I got the commands above from someone that used to update this file so i don't know exactly how they work
I am trying to create a formula to determine if my students made a point in high standers, which means if they got a level 3 and about in 2009 verse the student's 2008. Now if they stayed on the same level did they make learning gains. So what I need to do is look at the grade level of the student (Colum C), then 2009 Math Developmental Score (Colum J), and Finally 2008 Math Developmental Score (Colum M). So if the student scored a level 2 in 2008 and a level 3 in 2009 he gets a point, but if he stayed on the same level. The formula needs to look see if he made learning gains. So if the student is in grade 4 and was a level 3 in 2008 and 2009 he would need to score 163 points higher in order to get a point. I have created a helper table with the information need to calculate the information. I have been working on this for about a week I can’t seem to get it right.
In row E10:Z10 I have a series of values and in row E6:Z10 I have dates associated with each of the values in row 10.
I would like to create a formula to look in E10:Z10 for the maximum value and then return the date associated with that value. For example, if the maximum value is in P10, I would like the formula to return the date in P6.
I have tried without success to use the OFFSET function as follows:
I trying to out together a small script which performs the following:
-Select cell B7 and offset this by 12 columns and one row -Resize this by 14 columns, then -Apply the font format to the selected range from the first to the last row
The code below is what I've put together so far, and although this runs without issue, it's not applying the formatting.
I'm using the code below to perform the following:
Compare a column of project end dates (column G on the "In Flight Projects" sheet) with the dates in a row of column headers, and Where there is a match, count the number of projects which are being worked within that given month.
[Code] .....
The code works fine, but I'm having a little difficulty in making an amendment to the code:
In the following section of code I need to select the Range ("G8"), but then say if the value in the cell, offset minus 4 has the value of "C&R" then run the rest of the script :
[Code] .....
I've made the following changes, but I'm unable to get this to extract the figure despite not receiving any error message:
I have a number (>100) of excel workbooks (consistent format) on a server and I am trying to create a master spreadsheet with links to specific cells. I started using formulae based on Concatenate and Indirect functions but always had to use F2 & F9 to get a result. I am now working on a macro to build semi dynamic links, I am some way there but need some expert help please.
In Col A I have the path and file name for all my source files - I have used the Filename *.xls & FoundFiles for this.
In Col B is my specific file name(s) extracted from Col A using an If , Len and Text function.
My macro declares variables; File = Range (“B#”) and Data(21) - an array of 21 specific worksheet cell references
I then select C1 and with active.formula insert the consistent path, File and Data(1).
Then C2 with path name, File and Data(2). Then C3 path name, File and Data(3). & So on for the 21 variables in the array - not elegant but it works okay
I am now at the point where I need to move down the rows and repeat this for each source.
I am wondering (hoping ) there is a simple way of offsetting this for the 100 rows / source files. I would also like to be able to set the offset repeat by counting the number of populated rows in Col A.
The code (from memory so syntax may be a bit wonkey):
I have a rather details and complicated procedure that in effect is designed to find a value (>=) than a text box value inputed.
There are 2 other list boxes (5 & 6) that are also designed to narrow down the search.
The values available in list box 5 are a customers name in column C. (Sample sheet highlighted value in Yellow)
The values available in list box6 are a product type. (Sample sheet highlighted in blue) When i select a value in list box5 and in listbox6, i enter a numerical value into text box111.
I then click on a command button, to populate listbox3 with all found values in column C that are greater than or equal to the value in the text box.
Now comes the part i cannot seem to be able to do.
I need to be able to click on a selected value in list box 3, and find the value that is between 2-22 rows above it in column A and place this value in text box 4. (List box 3 values are ONLY ever
I have used the Selection x1Down code to select all rows to the next one with data in but now need some code to deselect the final row (I want to delete all of the blank rows above)
I am trying to write two different codes to copy a range of data. Basically I am trying to understand how the OFFSET function works in VBA. The first code listed works fine and is as follows:
I am trying to OFFSET from cell A1 based upon a variable in cell A2. The cell I need to OFFSET to is also located in column A, but it could always differ based upon the variable in A2. Here is the piece of code performing this OFFSET.
I am having trouble with one line of this code that I can't figure out how to write correctly. I have set the range, but I need to offset by 10 rows up. My code fails at set rng.
I have 3 workbooks, the first one contains the data and the second is the “Table1” containing "Normal records" and the third is the “Table 2” containing only "900 Records". Tables 1 and 2 will be linked to Access…..
Here’s my issue….
From workbook 1, I would like to copy data from certain cells that contain data to Table 1
From workbook 1, I would like to copy data from certain cells that contain 900 service records data to Table 2
In workbook 1, I have identified which information i want to keep by using the following formula,
i have a table with customers and the rentals they have made. in the table it has their customer number and then the item code of the item they have rented out.
i want to have a table that brings up the item codes of what they have rented but with a vlookup it only brings back the first item they have rented and not the ones after that.
where the first column is one continous stream on data(of variable length). what i need to do is every time the word start occurs copy down to the next start-1 and paste it to the same row is first start but over to the right ie
i have a created a connection with Access table named Test, the table has 3 fields, ID,Firstname and LastName. The values in field firstName is filled in a Combox which is in Sheet1 of excel sheet.
so far i have done with the coding which create a connection with access table and fille all the firstname from the table to the Combobox using a recordset.
the code for filling combobox value from records set is like
Do Until RecordSet.EOF shp.ControlFormat.AddItem RecordSet.Fields("Name").Value RecordSet.MoveNext Loop
Now what I need is whenever I select a name in a combobox the Cell A1 in excel should show me the LastName for that name.
can i make offset with variable value, i am trying to make a code to Auto filter data then copy it to another sheet.
then take offset of number of rows of previous criteria and copy next set of data
my code is
Sub Test() Dim rng1 As Range Dim rng2 As Range Dim rng3 As Range
[Code].....
When i use this Code it offsets second data paste place to be very far away, like at cell 69 while it should be only at cell 6 or 7 based on L value, is that right, there is another way to do it ?