Is is possible to have Excel update time automatically in a given cell within the spreadheet.
I have a spreadsheet that I need Excel to update the time automatically .
I would like Excel to update the time automatically in cell A1.
I have done some research and found the following thread but this only works when we close and open the spreadsheet.....
I have a cell (H2) that contains the formula =NOW(). I would like this cell's time to be updated every minute automatically, with a Macro that will start itself the moment the spreadsheet is opened. I have attempted to find other users with the same question and have attempted to use Macro's supplied however without success. I have previously found this piece of ...
View 5 Replies View RelatedLet's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
I am trying to create a simple scoring system for sports that use a "legs" and "sets" format (e.g. tennis, darts etc.)
I would like the "sets" cell to automatically update as the "legs" cell reaches the required amount of legs to win a set. After that I would like the "sets" cell to continue to count upwards when/if another set is won. Is this possible?
Lets say I have two sheets titled "dashboard" and "raw data" in a workbook. Cell A1 in "dashboard" should always show the most up to date data from Row 1 in "Raw Data".
I update "raw data" daily, adding a new column to Row 1. For example December 19 would be A1, December 20 would be B1, December 21 would be C1 etc...How can cell A1 in "Dashboard" always reference the newest cell in Row 1 of "raw data"?
I have a worksheet(A) with rows of data associated to a date that gets a new row of data points once a month. On the second worksheet(B) I have two columns, one (Current Month) to show the data in the newest row (transposed), and one (Previous Month) to show the data in the row above it (from the previous month)(also transposed). Is there any way to get the columns in worksheet B to automatically read the newest row of data from worksheet A into column Current Month and automatically update the column Previous Month with the row above it?
View 7 Replies View RelatedI have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
I am trying to create a job data sheet as per below. Under 'Sales Item' I have a drop down menu to select the item sold. I am trying to set up an autofill formula to fill the 'Stock Cost' cell once we have selected the relevant product from the drop down menu. The data is on another worksheet on another tab at the bottom of the sheet.
Sales Item
Sale Price
Stock Cost
Profit Per Item
Installation Commission
£0.00
£0.00
£0.00
£0.00
[Code] .....
I am linking to cells on a spreadsheet and in some cases the formula is showing in the cell and in others the contents of the linked cell. I have forced updating (F9 )and F2 enter with no effect. Is their something i am missing as I want all the links to update automatically. If I copy and paste a working formula into one of these cells it updates albeit with the wrong reference but if i go in and edit F2 etc then it shows as a formula.
View 4 Replies View RelatedI am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank.
Cell 'B1' has a drop down to select specific items.
Cell 'C1' is the date of the order and is a locked cell.
Cell 'D1' is the date of completion and is a locked cell.
The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date.
If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
Cell C3 has "Joe"
Cell X44 is a VLOOKUP that retrieves "Joe"
Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.
What's needed to make this happen?
I am working on a manpower spreadsheet and need for one spreadsheet to extract data from another and automatically update if it is changed and I am struggling below is an example of what is on spreadsheet 1:
Mentor.jpg
and the information from spreadsheet 1 is copied to spreadsheet 2, however if amendments are made to spreadsheet 1 they are automatically updated on spreadsheet 2:
Spreadsheet 2:
C0-ord.jpg
but on my sheet the cells wont automatically update with the colors unless I double click the cell then click enter - it then refreshes and inserts the color.
I have two worksheets...
Sheet 1
A1: description
A2: Target Iteration
A3: Concat A1, A2.
Sheet 2.
A1: Drop down datavalidation list selected from A3, sheet 1.
On sheet 2, a user can select from the list. If a user changes the value in A2, sheet 1, I want the value that is associated and already selected in A1, sheet 2 to automatically update. There is a 1 to many relationship with the concat and the drop down. In that, sheet 2 can have multiple rows with the same value from sheet 1 A3. Is there a way when A3 sheet 1 changes, to search in A:A in sheet two and update the values for those records that match the original value in A3, sheet 1?
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies View RelatedI can easily use VBA to update a column's next cell with a value from a static cell. As easy as this may be for most, I seem to be struggling!
For example, I would like cell B3 (then B4, B5, B6 etc) to update, according to a value (time frame in seconds) in cell C3, with a value from the cell D3.
I needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View Relatedif i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
I am looking to have a macro which will automatically add the username and date to a cell, when the cell above changes (or in this case =x). I have a bit of code from a previous project, but I have changed Target.Row to Target.Column and it is not behaving as I require:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("B2:BZ2"), Target) Is Nothing Then
Range("C" & Target.Column).Value = Format(Date, "dd-mmm") & " " & Format(Time, "hh:mm") & " by " & (Application.UserName)
End If
End Sub
See the attachment for the example. What I need is whenever row 3 ="x" I need the corresponding cell in row "d" to update with the latest date, time and username. Please not the macro is currently not active on the sheet as i've added the ' character.
What is the easiest way to have a cell update with real time stock quotes for a particular stock?
View 4 Replies View RelatedWe have a worksheet that contains twelve different charts. Once a month, we load data into anotheer worksheet and run a macro and it produces the twelve charts. The problem is that we have to manually update/change the month name in each chart title every time we run the macro to produce the charts. Is there a way to automatically update the month name so that we do not have to manually do it? For example, the current chart title is "xxxxxx - March 2014"....when we run the charts for April, we have to manually change March to April in each of the charts. Can this be done automatically?
View 2 Replies View RelatedThis what my excel sheet looks like that i am using the date ant time cell is set by using the now formula to get the current date and time, but I only want the date tiem change for each row when it changes.
For example when the data for the first row changes all the dates and time change, but I only want the effected rows time to change not all the times and dates, this progam is set up to monitor inventory and when some makes a change to the inventory I need to now when the that data was recorded but do not want the users to have to enter the data and want it to be enter automatically that is why i am using the now function. The data may not change at all for a couple days that why I need to be able to keep the Date data from changing automatically.
Bin #ProductAmount
D-21Red Lentils 3/47/7/09 1:54 PM
D-22Red Lentils 1/27/7/09 1:54 PM
D-23Yellow Peas 3/47/7/09 1:54 PM
D-24Yellow Peas 3/47/7/09 1:54 PM
D-25Yellow Peas 3/47/7/09 1:54 PM
D-26Yellow Peas 3/47/7/09 1:54 PM
D-27Yellow Peas 3/47/7/09 1:54 PM
D-28Yellow Peas 3/47/7/09 1:54 PM
D-29Yellow Peas 3/47/7/09 1:54 PM
D-30Yellow Peas 3/47/7/09 1:54 PM
I have a worksheet with a cell that references another cell.
Cell A1 references cell B1, and the value of cell A1 is "=B1"
When I type anything in B1, A1 won't automatically update to reflect what I've typed. The only way I can get it to update on the fly is to save the workbook. Even when I close the workbook and reopen it, it still won't update to what I've typed in B1. Is there a setting that keeps it from autoupdating?
I require a total amount of 'cost price' items we have in stock.
As you can see from sheet 1, 'Adidas', the total is £43.00. However that is not the cost of stock, as some items are not in stock, as per Column I. (The cost is actually £36.00).
How can I make a total to include just items in stock? Bear in mind new stock is inserted between others in order of Model so the forumale would need to update automatically, and there are several hundred sheets, not just 2.
I have a dashboard (CW Dashboard.xlsx) that is linked to 3 main spreadsheets. In each main spreadsheet, there are 5 tabs. One tab contains raw data, the other 4 tabs contain tables: 2 tabs with formulas based on the raw data tab, and 2 tabs linked to 20 other spreadsheets (for now). I separated the raw data into 3 spreadsheets because Excel was calculating way slower than my patience would tolerate. All spreadsheets are Excel 2010. All spreadsheets reside on our network drive.
The links update as expected on the 2 tabs that are linked to the 20 different spreadsheets in each of the three main spreadsheets.The CW Dashboard does not update. I get #REF! in each cell (although when I click in the cell, the link shows no error). I am using VLOOKUP and HLOOKUP in this spreadsheet. I can of course open the source documents from within the Dashboard and the links then work as expected. However, I would prefer the eventual users of the Dashboard not have to open 4 s'sheets.
I have attached a sample of our worksheet (GTS807) used to create quotes and generate jobsheets etc once they are orders. To ensure we have enough of a size in stock I want to carry out a check against the stocksheet (stock) which I have no problem but I cant get it to automatically update the stock once a quote becomes an order and removes the quantity from stock!
As you see the balance of stock in shown in AA13 for "115270" but is there a code to find "115270" on the stock sheet and copy the new balance back there?
I have an excel based appliction that I distribute to about 150 people in the US, London, Hong Kong and Singapore. Distribution is currently done by email containing a link to a Sharepoint site (the email has the link, release notes, etc). The end users open the file and save it to their desktops, overwritting the previous version. I'm finding that many users are not updating their versions as they should be.
So what I'm wondering is if there's a way to have this process automated - so that when the user opens the file, it checks a repository (sharepoint or otherwise) for a more current version, then prompts the user to download it.
In my worksheet I have a data validation dropdown which changes the value in a cell. I then use VLOOKUP to find values in Personal.xls (open) based upon that cell. It works great, BUT if I make any changes to the data in Personal.xls it doesn't get updated in the other file. I've tried saviing, closing, opening etc but it never updates since I first did it.
View 7 Replies View Related
