Automatically Display Each Cell In Range On Time
May 3, 2008if i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
ADVERTISEMENT
Display End Time Automatically Upon Entering Start Time And Time Usage
Dec 19, 2008I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedExcel 2010 :: Display Message Box When Automatically Updated Value Within Range Changes?
Aug 27, 2013I use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
Automatically Change Cell (With Time) Color After Time Period Has Passed
May 23, 2008I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
Automatically Date & Time Stamp Changes To Specific Range
Jun 4, 2008i need to put a date stamp when a change is made in b3:b31 into e3:e31 for each row also i need to put a date stamp into g3:g31 when a change is made in F3:f31 i try to use 1 "worksheet-change" and it is fine once i use 2 i get Ambiguous Name Detected errors
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("b3:b31"), .Cells) Is Nothing Then
Application.EnableEvents = False
If IsEmpty(.Value) Then
.Offset(0, 3).ClearContents
Else
With .Offset(0, 3) ............
Update Time Automatically In A Given Cell
Mar 1, 2008Is is possible to have Excel update time automatically in a given cell within the spreadheet.
I have a spreadsheet that I need Excel to update the time automatically .
I would like Excel to update the time automatically in cell A1.
I have done some research and found the following thread but this only works when we close and open the spreadsheet.....
Input And Display Data In Cell In H:mm Format Without Changing To Time
Feb 25, 2010Can i put into the cells B38-AF38, that would display the sum of B20:AF20 + B24:AF24 + B28:AF28 + B32:AF32 +B36:AF36 in a h:mm format.
When imputing the data into a cell in a h:mm format, I need it to display in that cell and formula bar the h:mm format without having to put an apostrophe in front of "h" or ":mm" value. Once complete, this form is going to go to other trainers to use on their computers and I dont think they would remember to keep putting an apostrophe before the data.
Example:
B20= 1:15 (1h15m) NOT 1:15:00 AM
B24= :30 (30min)
B28= :45 (45min)
B32= 1:45 (1h45m) NOT 1:45:00 AM
B38= 4:15 (4h15min)
I have attached a copy of the form for better clarification.
It doesnt seem to be complicated, but it's certainly a lot more than I thought.
Automatically Add Username, Current Date And Time Each Tiime Any Cell Is Changed
Feb 27, 2009I am looking to have a macro which will automatically add the username and date to a cell, when the cell above changes (or in this case =x). I have a bit of code from a previous project, but I have changed Target.Row to Target.Column and it is not behaving as I require:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("B2:BZ2"), Target) Is Nothing Then
Range("C" & Target.Column).Value = Format(Date, "dd-mmm") & " " & Format(Time, "hh:mm") & " by " & (Application.UserName)
End If
End Sub
See the attachment for the example. What I need is whenever row 3 ="x" I need the corresponding cell in row "d" to update with the latest date, time and username. Please not the macro is currently not active on the sheet as i've added the ' character.
IF Funcation: Another Cell To Display An Age Range
Sep 22, 2009I have a field called “Age”. What I want to do is; If I type in the person’s age say “26” then I want another cell to display an age range (i need to entered the age ranges i want eg “16-20, 21-29, 30-39” etc. So if I type in 26 in the first filed I want to second cell to display “20-29”.
View 3 Replies View RelatedHow To Display The Value From A Range In A Separate Cell
Jun 8, 2014Want to be able to select a month (Jan - Dec) set in a range A1:L1. When the selection is made, I want the selected cell to be displayed in a separate location e.g. cell C4, but if the selection is outside the range A1:L1 then C4 to remain blank.
View 5 Replies View RelatedDisplay Which Cell Is Empty In Range
Feb 12, 2014In cell D1 of sheet 2, I want the cell reference to be displayed of the next available cell in column A of sheet1
for example if cells A1:A238 in sheet1 are populated the cell D1 of sheet2 will display A239
Display Last Cell In Range With Blanks
Sep 26, 2006How can I get the last cell with data, show in other cell? For example last cell populated info in total cell.
Date Cases Within 30 Days
01-Sep-0622.83
02-Sep-0622.78
03-Sep-06
04-Sep-0622.86
05-Sep-0622.82
06-Sep-06
07-Sep-06
Total22.82
Display Range List In Cell
Feb 20, 2008How could I create a menu that displays cells from another sheet when the appropriate menu value is selected?
For example, the menu (on sheet 3) would have:
Week 1
Week 2
Week 3
If I select Week 1, I want to display cells B4:B10 from sheet 2 underneath the menu. If I select Week 2, I want it to display cells B19:B25 from sheet 2 under the menu.
Display Cell X Of Range Based On Another Cell Number
Feb 18, 2008I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedDisplay Text Value Only If ALL Cell In Range Contain Certain Letter
Sep 6, 2013I'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.
View 9 Replies View RelatedDisplay Only A Particular Range Of Cells According To Data In A Pointed Cell
Jul 5, 2009I cant seem to work around this in excel.
For example.
I got work sheet with all data, and i need something like, if cell A1 = Left, and cell A2 = right, display only a range of data, say all data in row P to R and row U to W only accordingly to the criteria i set in a new worksheet in same workbook. And i need the display data to update automatically everytime i change the criteria.
Automatically Select Range With Known First Cell
Apr 8, 2014I'm looking for formula or a method how could calculate a product of range of cells when I have only the first cell, but I need to multiply 260 cells that are in front of it.
I now find a cell using index with double match criteria and use "Cell(info_type, Ref)" to determine the cell where the first value is. I need to take that value and multiply it with with t+1, t+2, etc. to get the final number.
Formula In Cell To Display No Of Cells In Selection (in A Range) Anywhere In Sheet
Feb 10, 2012Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient
View 4 Replies View RelatedExcel 2007 :: Average Of Set Range - Display Blank If Cell Contains 0
Mar 13, 2013I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
Display Named Range Contents Based On Text In Cell
Aug 24, 2009I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
Automatically Clear Contents Of Cell Range
Jan 17, 2013Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.
My code so far is as follows:
Code:
If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _
MsgBox "Your Entitlement is currently 0", vbCritical, "Error"
ActiveSheet.Range("K84:T84").ClearContents
The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..
Copy/Paste Automatically When Cell Is Active Of A Particular Range
Dec 6, 2009can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedAutomatically Format Range Based On Specific Cell
Aug 19, 2008I am looking for VB code that will format a range of cells from a number format to a percentage format based on a reference cell. The reference cell is a drop down created from a list validation.
For example: If the reference cell (cell A1) =1 then cell range B2:C4 would be a number format. If A1 = 2 then cell range B2:C4 would be a percentage format.
I have searched for hours trying to find a relevant thread; I know they are out there, maybe I just wasn't typing in the correct search words.
Automatically Clear Range Based On Cell Criteria
Jan 9, 2007I have the following Worksheet Change Event in my worksheet. The contents of range rng are not cleared.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
rng = Range("F" & Target.Row & ":M" & Target.Row)
If Not Intersect(Target, Range("N5:N1000")) Is Nothing Then
If Target.Cells.Count = 1 Then
If Target.Value = "Yes" Then
Application.EnableEvents = False
rng.ClearContents
Application.EnableEvents = True
End If
End If
End If
End Sub
Automatically Save My Workbook When A Certian Cell Range Is Changed
Jul 21, 2009I am very new to vba and trying to figure out an auto save macro that will automatically save my workbook when a certian cell range is changed. Right now I have a macro set that automactially record the time and date of when a change is made to the name cell, I want to set up a macro that will automatically save the file when the time is updated.
This program is used by several users and they have a tendnecy to forget to save the program so that when other people want to check the updated data nothing has changed because the changes have not been saved. I have attached the file that I am working on. When a change is made in column F then Column G automatically updates, now I want column G to trigger autosave. I would also like a msgbox to appear to tell user that file has been saved.
Automatically Display 2 Sheets When Opening A Workbook
Apr 9, 2008I am preparing a simple document for employees to use that requires viewing two sheets simultaneously.
To make it user friendly I would like, if possible, to save it so that when opening the file, the two sheets open side by side without the user having to open the new window and juggle with window sizes etc.
How To Create Excel Userform Display Automatically
Jun 26, 2013I have table in excel sheet and i want Create an Excel User Form display automatically to this table, how?
View 3 Replies View RelatedTime Display / Non Display.
Jun 1, 2009I have 2 columns E and F that I am using, in Column E, I enter a time say 22:43:00, column F currently ads 15 minutes to what ever is in there with '=E3+TIME(0,15,0)' which is fine except if column E has no time in it when it automatically puts in 00:15:00, hov can I get the cell not to display anything in there is no value in column E.
View 2 Replies View RelatedCell B1 To Display True If Any Of The Values In Column C Match Otherwise I Want To Display FalseOR Function Confusion
Dec 16, 2008Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
If Cell Text Equals Cell Text In A Range Of Cells Display Value From Range Of Cells
Oct 4, 2012I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")