how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies
I found this thread which deal with populating unique values in my listbox.
Here is the thread link. [URL] ........
What these line of code mean (the ones in red).
Code:
Private Sub UserForm_Initialize()
Dim v, e
With Sheets("maintenance").Range("c2:c500")
v = .Value
End With
With CreateObject("scripting.dictionary")
[Code] ......
Note : I simple tried to check the value of v by giving msgbox (v), just below the line v = .Value.
But I got run-time error 13 : Type mismatch error.
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View RelatedI am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I need to populate the textBoxes from the selection from ComboBox I've created in a UserForm. I have attached the file that I was working on. I want to be able to keep selecting then populate the text box until I have finsihed.
View 2 Replies View RelatedI have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I am looking to fill out a combobox (say combobox1) in a userform from a set of ranges located in a different workbook (that is in a different location).
For example, the cells that would need to be in the combobox are B5:B41,D5:D40 and F5:F45 and the file location is W:WCWORKCENTERS.xls
I'm trying to link combo box's on a user form to a hidden workbook. I placed the workbook into
C:Users[User Name]AppDataRoamingMicrosoftExcelXLSTART
Then hide the worksheet which essentially hides the workbook as only 1 sheet is present in workbook. This should make the workbook available every time a user opens Excel
Now when i initialize the form i get an error
Run-time error '1004': Method 'Range' of object'_Global failed
However when i unhide the worksheet the form runs fine. Do i need to declare the combo boxes differently than shown below The range "Tools" does exist on the hidden workbook.
I have a userform which inputs data based upon a chosen item from a combobox. Combobox3 pulls numerical items from Rows17 and below in columnA of active worksheet. The first problem I am having is that the combobox itself is cutting numerical numbers short. Items go out to the thousandths (ex. 1.001) but in cases where there is a "0" at the end of the decimal it abbreviates it (ex.1.01) is there anyway to fix this? The second issue is I would like to populate "Textbox4" with the columnC content of the item chosen. (Ex. User choses Item 1.001 (found in row118) then Textbox4 would = the value of C18) Below is the current code utilized for this userform.
View 6 Replies View RelatedI need to populate a combo box on a form with the column name (A,B,C...etc) and the first row data. I need the code to check all columns in-case of missing column data.
Its important to note the data will be dynamic. In my add in, a form opens on requests and asks the user which column he needs to action data on. this could be on any one of several non similar spreadsheets.
E.G.: Combox to hold the following data (see column D has no data or header row):
Column A - Date
Column B - Rep
Column C - Customer
Column D -
Column E - Product
How can i pass this info to the form ?
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
i would like to create a vba that will populate based on the comboboxes value
like this code
Code:
'for cmb1
'if cmb1 = major 1 then
'if range"F4" is empty then
'copy sheet1 range"A5:R5" to sheet2 range"F4"
'if cmb1 = major 2 then
'if range"F4" is empty then
'copy sheet1 range"A16:R16" to sheet2 range"F4"
[code]....
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedI need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
My table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
The code below extracts unique distinct values from column A, except cell A1. Then the code adds the extracted unique distinct values to the combo box.
Sub FilterUniqueData()
Dim Lrow As Long, test As New Collection
Dim Value As Variant, temp() As Variant
ReDim temp(0)
On Error Resume Next
With Worksheets("Sheet1")
[Code]....
The vba code below copies the selected value to cell C5 whenever the combobox is selected
Copy the code into a standard module.Assign this macro to the combobox
Sub SelectedValue()
With Worksheets("Sheet1").Shapes("Drop Down 1").ControlFormat Worksheets("Sheet1").Range("C5") = .List(.Value)
End With
End Sub
Vba code belows instanly refresh the combobox when values are added/edited or removed from column A,
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("$A:$A")) Is Nothing Then
Call FilterUniqueData
End If
End Sub
My problem is this:
Everything will be working fine if the all combobox and data can be found in 1 sheet, but how could i make some tweaks if the combo box is located in sheet 2 provided your data to be populated is in sheet 1, i tried everything but the combobox doesnt update,
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
I have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
I'm running in to some problems on creating a Userform. I will try to explain it as best as possible. Right now I have a userform set up with 2 ComboBoxes. Here is my current code. It's not near complete.
Private Sub CommandButton1_Click()
Set ufStart = Worksheets("Data"). Range("AP4")
Set valNames = Worksheets("MasterData").Range("AA6")
Set valMonths = Worksheets("MasterData").Range("H3")
Set SelMonth = ComboBox2.ListIndex
Set SelName = ComboBox1.ListIndex
If TextBox1.Value > 0 Then
ufStart.Offset(SelName, SelMonth).Value = TextBox1
Else: End If
End Sub
The way it's supposed to go, is if TextBox1.Value is greater then 0... then go to UfStart and Offset by Row, which is ComboBox1 Selection Index Value and by Column, which is ComboBox2 Selection Index Value. I can't get the sub to get past Set SelMonth = ComboBox2.ListIndex.
I have created a User form with Combobox's, which in turn look up cell references in another sheet. In order to make maintainence of the combobox's as easy as possible I'd like the look up as many cells as possible, therefore anyone can easily add additional text to go into the user forms. However I don't want the blank spaces to show until something has been added.
View 9 Replies View RelatedI have a userform that I use to enter fault calls and it saves in to a spreadsheet.
I want to develop the capability to be able to have a form that Will search a pre-existing call and then when it finds it to bring up the main userform and populate it with existing details so that the user can amend them if reqd and save back to the database.
So what i want.
Userform - New Call
Userform - search existing call
I want to open 'search existing call' userform, be able to search based on one of the following: callrefnum, fault_type, Call_logged_by
Once the call is found - it should be displayed and then on double click it shd open up in the main userform 'New Call' with all existing details populated.
I have a userform with 15 Combo boxes & I would like to make sure all the enabled combo boxes (some may be disabled) have a value > 0 (Zero) before exiting the userform.
View 5 Replies View RelatedI have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedI have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
I have a userform that has a "payment type" combo box
This box consists of:
Below is my current code. The strFind1 searches for a name within the database and then I need strFind2 to do a exact for a Subproject search and a partial search for everything containing the Subproject selected and other Subprojects. Currently, when the database entry in the worksheet includes Subproject 1 the search function works but when I have an entry that contains Subproject 1/Subproject 4 it does not find the entry. How can I expand the strFind2 to equal what is selected in the Combobox2 and find entries that have what is selected plus more text. I have set the line where I think everything is going wrong to a bold format.
[Code] .....
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
