Userform - Second Combobox Based On First Combobox
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
ADVERTISEMENT
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
Jun 20, 2009
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
View 14 Replies
View Related
Jun 12, 2006
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
View 9 Replies
View Related
Feb 8, 2008
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies
View Related
Jul 20, 2014
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies
View Related
Feb 20, 2012
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies
View Related
Mar 17, 2014
I have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
View 4 Replies
View Related
Dec 21, 2009
I have a userform that has a "payment type" combo box
This box consists of:
View 6 Replies
View Related
Jun 28, 2014
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
View 9 Replies
View Related
Feb 14, 2013
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
View 1 Replies
View Related
Jun 18, 2014
I am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
View 7 Replies
View Related
Jun 10, 2013
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
View 2 Replies
View Related
Mar 30, 2009
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
View 9 Replies
View Related
Dec 8, 2009
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies
View Related
Oct 1, 2009
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies
View Related
Sep 28, 2013
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
View 2 Replies
View Related
Feb 5, 2014
Is it possible that i fill the CB.list with range().value so the values are in Column 'A' and in Column 'C' and if i enter the field and select value then i see value from column 'A' & value in Column 'C'?
Then if i pick one value then the CB.value = the value from Column 'A' only, Can i solve it some how?
View 4 Replies
View Related
Feb 26, 2009
Carrying on from my calculation problem which now has been solved i am needing help with comboboxes
i have a combobox21 which i have made a dropdownlist ie Types of products from Product1 to Product 16 inclusive (i have sorted this)
i also have another 28 comboboxes, which of the 16 products i pick in combobox21 i need each of the other 28 comboboxes to display the the sub products
products and sub products are stored on sheet1 in the excel file as below
A B C D
1 Product1 Product2 Product3 Product4 etc .........
2 P1A P2A P3A P4A
3 P1AA P2AA P3AA P4AA
4 ETC ETC ETC ETC
So if i pick Product1 in Combobox21 then in each of the other comboboxes i need to be able to select P1A OR P1AA ETC .....
i have a named range of products A1 to O1 Called PRODUCTS
i will have to create 16 mores ranges for the items in each product but that is no problem
View 9 Replies
View Related
Jan 31, 2013
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
View 4 Replies
View Related
Mar 14, 2014
I have a userform that I wish to be a front page for a work sheet containing personal staff information. I would like it to self populate according to a selection from a combo box (Surname). So far I am using the code below however where this code encounters those with the same surname it only displays the first row it comes across. Each row does have a staff ID number that is unique but I cannot search by this on its own as it would not be user friendly.
VB:
Private Sub ComboBox1_Change()
Dim r As Range
Set r = Sheet2.Range("A:A").Find(What:=ComboBox1.Text, lookat:=xlWhole, MatchCase:=False)
If Not r Is Nothing Then
[Code] .....
View 1 Replies
View Related
Mar 3, 2014
I need to base a combo box / TextBox on the result of the previous combo box.
1. The first combo box is a simple 2-option: "New" or "Exisiting" choice
2. If the answer is "New"; I need a TextBox to show which would allow the user to input a code
3. If the answer is "Existing"; I need a second combobox instead of the text box which will allow a selection of codes.
View 3 Replies
View Related
Oct 22, 2007
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies
View Related
Dec 5, 2008
I have a userform with a textbox and a combobox
textbox input will be a house number
combobox will be a list of all the street names that have that house number in my database
column Q are house numbers, column R are street names
when a user inputs a number into the textbox and tabs to the combobox,
for each cell in column Q of workbooks("proposals.xls").worksheets("database") that has the textbox1.value I want the cell value of .offset(0,1) to be added to the combobox.
View 10 Replies
View Related
Mar 22, 2009
I have more problem when work with three combobox, will you find me the code to solve this problem.
View 2 Replies
View Related
Jan 27, 2010
Basically I want it to look similar to the vehicle search on auto trader, or whatcar, where you first chose the make, then use a second combobox for the model (dependent on the choice made in the first combobx.
View 6 Replies
View Related
Jul 31, 2013
I am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub
View 4 Replies
View Related
Nov 9, 2013
I have created a user form that needs dependent combo boxes. I have created multiple lists to use for different types of contacts and just want to use the if function to say that if combo box one's value is this, combo box two will use this list in its drop down box. This is what I have at the moment below.
cbosoi is combo box one and cboname is combo box 2. If I select Duty_manger from the first list I want it to point to the Duty_Manager list for combo box 2. It does that but it selects the duty manager list for anything I select in combo box one!
If cbosoi.Value = duty_manager Then
Me.cboname.List = Worksheets("lookuplists comms").Range("duty_manager").Value
End If
View 5 Replies
View Related
Apr 19, 2007
I'd like to say that this Forum is helping me very much when reading so many useful topics, get help from ppl here. From nothing I advanced my program very much. About my problem here:
I have an Excel Column with Dates (dd-mmmm-yy) and an UserForm/ComboBox. I'd like to add only the unique dates from the Excel Column to the ComboBox. The Excel Column Range is updating with new dates.
I tried to use RowSource but i don't know how to get the unique dates with RowSource. Maybe RowSource is not a good decision.
View 9 Replies
View Related
