Filtering Multiple Combobox At Userform
Nov 24, 2013
Is it possible to create a data base with the given sample below?
COLUMN A
COLUMN B
COLUMN C
COLUMN D
COLUMN E
UNIT TYPE
CONDITION
NAME
TELEPHONE NO.
DATE
1+1
SALE
Name1
tel1
3-Oct-12
[Code] ...
The Userform has 2 ComboBoxes and 1 ListBox
ComboBox1 will be the one of the Column A Value
ComboBox2 will be the one of the Column B Value
I did handle that ComboBoxes already....What I need only, when those ComboBoxes been selected the related datas will fill into the ListBox accordingly...
View 9 Replies
ADVERTISEMENT
Feb 14, 2013
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
View 1 Replies
View Related
Nov 8, 2012
I am trying to display multiple columns in my combobox on my userform.
I have it where it will find and load the data but when i select from the data only 1 column shows is there a way to have all 4 columns show up?
Dim lrowzz As Integer
lrowzz = (Sheets("graphs").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row) - 1 'new row to enter data into NEXT AVAIABLE ROW
Me.capac.List = Sheets("graphs").Range("B43:e" & lrowzz).Value 'populates the capa combo box on change capa tab
that is my code to populate the combobox using a dynamic range from B43 - D & Lastrow with data
Column b Column C Column D Column E
333 infoa dateA LocationA
334 infob dateb locationb
335 infoc datec locationc
when it loads the combo box i can see:
333 infoa datea locationa
But when I select 1 of the lines all that is displayed is Column B Data. How do i get it to still show all of it?
View 2 Replies
View Related
Jun 16, 2014
How to filter a table according to a value and show a particular column in the combobox?
For example i have a table like this:
[Code] .....
And i want to filter "A" and insert the column 3 values into the combobox list.
Combobox must show Smone2 and Smone4
View 4 Replies
View Related
Oct 1, 2009
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
View Related
Jul 21, 2014
I have a userform which writes a date into a cell within a row within a table. The code is
[Code] .....
Everything works fine, the date gets sent to the cell as stated and is all correct. However, I also have vba which runs an advanced filter, which the following code is included in.
[Code] ....
P7 and O7 are the advanced filter criteria. Basically in the form I have a "completion date" which is posted with the first code I posted. So lets say that the date posted is 25/07/14, and I want to have a filter of all the dates which are coming up in the next 7 days to be shown in the Advanced Filter results area of my spreadsheet.
With the second part of code I posted, this results in nothing when using the advance filter. The original posted date in the cell (from the first code) is shown as "25/07/14". So when I run the advanced filter, nothing happens. HOWEVER, if I go to the cell containing "25/07/14", delete the contents and write "25/07/14" manually and then run the advanced filter (second code posted), the date shows up in the results working fine. But I dont understand how me typing it out again makes it work?
View 2 Replies
View Related
Jan 28, 2014
I want to be able to filter on an excel spreadsheet by dates between x and y. The values x and y are each in my userform textboxes, tbStart and tbEnd.
For whatever reason there seems to be a format issue. When I run the script I see that the data is filled correctly in the filtering fields but I don't see any results. I simply need to click ok when reviewing the filter and it works. This makes me think that there is something wrong with the format of my tbStart.Value and tbEnd.Value
Here are the variations I have tried:
The values on their own should always be formatted as date in the text box as I am using spin buttons to edit the date
with this code or similar
Me.tbEnd = Format(CDate(Me.tbEnd) + 1, "dd/mm/yyyy")
Me.tbEnd = Format(CDate(Me.tbEnd) - 1, "dd/mm/yyyy")
Version 1:
wsData.ListObjects("Table2").Range.AutoFilter Field:=2, Criteria1:= _
">=" & Me.tbStart.Value, Operator:=xlAnd, Criteria2:="=" &
CDate(Me.tbStart.Value), Operator:=xlAnd, Criteria2:="=" &
CDate(Format(Me.tbStart.Value, "dd/mm/yyyy")), Operator:=xlAnd, Criteria2:="
View 2 Replies
View Related
Feb 5, 2014
Is it possible that i fill the CB.list with range().value so the values are in Column 'A' and in Column 'C' and if i enter the field and select value then i see value from column 'A' & value in Column 'C'?
Then if i pick one value then the CB.value = the value from Column 'A' only, Can i solve it some how?
View 4 Replies
View Related
Feb 26, 2009
Carrying on from my calculation problem which now has been solved i am needing help with comboboxes
i have a combobox21 which i have made a dropdownlist ie Types of products from Product1 to Product 16 inclusive (i have sorted this)
i also have another 28 comboboxes, which of the 16 products i pick in combobox21 i need each of the other 28 comboboxes to display the the sub products
products and sub products are stored on sheet1 in the excel file as below
A B C D
1 Product1 Product2 Product3 Product4 etc .........
2 P1A P2A P3A P4A
3 P1AA P2AA P3AA P4AA
4 ETC ETC ETC ETC
So if i pick Product1 in Combobox21 then in each of the other comboboxes i need to be able to select P1A OR P1AA ETC .....
i have a named range of products A1 to O1 Called PRODUCTS
i will have to create 16 mores ranges for the items in each product but that is no problem
View 9 Replies
View Related
Jan 28, 2008
I am trying to filter three columns of data to a given range without having to using auto filter on each column. I would like to have a Macro or Control Button or something easier than picking each set of data each time I want to filter.
Attached is a sample file.
I am not well versed in Excel and this is my first post so please bear with me in this process.
View 14 Replies
View Related
Dec 3, 2008
I have a raw data page which contians peoples name and where they charged thier time. My problem is that I only want thier name to appear once. What type of formula do i need to use to make this happen.
Ex
Employee name Project No. WBS Code Hours
John Smith 123456 1 4
Jane Doe 123456 1 2
John Smith 123456 2 2
Jane Doe 123456 2 1
John Smith 123456 3 2
Jane Doe 123456 3 5
At the end I want to do a count to let me know how many people I have charging the job but I don't know what formula I need to exclude duplicate entries.
View 4 Replies
View Related
Sep 9, 2009
I need to find the total $ collected on repair orders that contain customer pay and warranty repairs. The problem is that C and W show up on differerent rows, if an RO has 4 lines 3 may be c and 1 line w. I don't know how to use pivit tables to get the info I am looking for, or if that is the best way to fnd my answer.
View 8 Replies
View Related
Mar 20, 2013
I need to filter 20 out of 100 text values (3 letters each) in a table.
The 20 values are listed in a separate column and I don't know how to filter by that range without manually selecting all of those 20 in the filter?
View 3 Replies
View Related
Jul 28, 2008
a formula in excel. here's what i need to do:
column A has the names of deffirent drivers (ex; john, peter, james)
column B has start time (9:00, 10:04, 11:08)
column C end time (9:14, 10:16, 11:23)
i need a formula that will take all the "john" from column A, do column c - column b for the time it took and then do an average of all of john's attemps.
View 10 Replies
View Related
Jan 31, 2013
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
View 4 Replies
View Related
Mar 14, 2014
I have a userform that I wish to be a front page for a work sheet containing personal staff information. I would like it to self populate according to a selection from a combo box (Surname). So far I am using the code below however where this code encounters those with the same surname it only displays the first row it comes across. Each row does have a staff ID number that is unique but I cannot search by this on its own as it would not be user friendly.
VB:
Private Sub ComboBox1_Change()
Dim r As Range
Set r = Sheet2.Range("A:A").Find(What:=ComboBox1.Text, lookat:=xlWhole, MatchCase:=False)
If Not r Is Nothing Then
[Code] .....
View 1 Replies
View Related
Mar 3, 2014
I need to base a combo box / TextBox on the result of the previous combo box.
1. The first combo box is a simple 2-option: "New" or "Exisiting" choice
2. If the answer is "New"; I need a TextBox to show which would allow the user to input a code
3. If the answer is "Existing"; I need a second combobox instead of the text box which will allow a selection of codes.
View 3 Replies
View Related
Oct 22, 2007
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies
View Related
Dec 5, 2008
I have a userform with a textbox and a combobox
textbox input will be a house number
combobox will be a list of all the street names that have that house number in my database
column Q are house numbers, column R are street names
when a user inputs a number into the textbox and tabs to the combobox,
for each cell in column Q of workbooks("proposals.xls").worksheets("database") that has the textbox1.value I want the cell value of .offset(0,1) to be added to the combobox.
View 10 Replies
View Related
Mar 22, 2009
I have more problem when work with three combobox, will you find me the code to solve this problem.
View 2 Replies
View Related
Jan 27, 2010
Basically I want it to look similar to the vehicle search on auto trader, or whatcar, where you first chose the make, then use a second combobox for the model (dependent on the choice made in the first combobx.
View 6 Replies
View Related
Jul 31, 2013
I am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub
View 4 Replies
View Related
Nov 9, 2013
I have created a user form that needs dependent combo boxes. I have created multiple lists to use for different types of contacts and just want to use the if function to say that if combo box one's value is this, combo box two will use this list in its drop down box. This is what I have at the moment below.
cbosoi is combo box one and cboname is combo box 2. If I select Duty_manger from the first list I want it to point to the Duty_Manager list for combo box 2. It does that but it selects the duty manager list for anything I select in combo box one!
If cbosoi.Value = duty_manager Then
Me.cboname.List = Worksheets("lookuplists comms").Range("duty_manager").Value
End If
View 5 Replies
View Related
Apr 19, 2007
I'd like to say that this Forum is helping me very much when reading so many useful topics, get help from ppl here. From nothing I advanced my program very much. About my problem here:
I have an Excel Column with Dates (dd-mmmm-yy) and an UserForm/ComboBox. I'd like to add only the unique dates from the Excel Column to the ComboBox. The Excel Column Range is updating with new dates.
I tried to use RowSource but i don't know how to get the unique dates with RowSource. Maybe RowSource is not a good decision.
View 9 Replies
View Related
Aug 17, 2005
I am a total noob when it comes to userforms. I want to create a userform with a simple combobox that contains 4 different selections. Along with this combobox will be a Submit button and a Cancel button.
View 6 Replies
View Related
Jul 30, 2014
I have a workbook that has the main user interface on sheet3 and the main database i'm trying to filter on sheet2. Sheet3 has the button that executes the code to open the worksheet with the database and filter based on certain criteria and will filter unique id if a numeric value is entered and surname if text is entered.
Originally this worked ok when i had the button and the' rcrit' cell reference on the same worksheet as the database i'm trying to filter, but i decided to move them to the interface page as it was interfering with other things i'm trying to do.
Ever since then i can't seem to edit it to make it work from the other page! I've tried changing the filter ranges to reflect the new set up, but it seems to no longer be able to recognise numeric/none numeric values.
here's the code I'm using.
VB:
Sub filter()
Application.ScreenUpdating = False
Dim rCrit1 As Range
[Code]....
View 2 Replies
View Related
Jul 31, 2013
I work with project data.... I have attached a small sample. I will have data across 8 - 10 tabs with respect to costs associated with different projects.
What I do now is go through each tab and set filters based on what project and date range I am looking for ... if I am not careful, there may be other filters previously set that I do not notice and my data isn't accurate and I may spend quite a bit of time reviewing all the filters and resetting as needed.
But, the filtering will be the same across all tabs (i.e. I may want to see all project data for a single month, or I may want to see all project data for a single project across all date ranges.)
is there a way to create another tab which I can identify the desired filtering than can populate across all the tabs? not all the tabs contain the same number of columns of data, but they do all contain some similar columns that represent the typical filtering range.
View 1 Replies
View Related
May 2, 2013
I have a database with 10 properties of a certain kind of material #.
IE: Material 1206 is Black, SG is 1.2, Duro is 70, Cure, tensile, price, etc.
I want a user to select 5 criteria from a drop-down list and have the 6th drop-down box populate available materials that meet the previous 5 criteria. I am trying to do this automatically and avoid user trying to autofilter (have to make it easy). I've extended the database out to show either a "0" or "1" if the 5 criteria match, but I can not get them into a drop-down list with a formula due to a #REF! error. I am not sure where the circular reference is coming from or what I have to do to change it.
View 1 Replies
View Related
