ComboBox Selection That Fills A TextBox And Other ComboBox
Sep 28, 2013
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
View 2 Replies
ADVERTISEMENT
Nov 8, 2012
Attached is my sample data.
In sheet "support data" I have two columns.
One column is a client reference and the one next to it is a client name.
On my form the combo box is populated with the client references.
When i select a reference in the combo box I would like to populate textbox1 with the corresponding client name from "support data"
(as an advanced feature it would be good if the textbox1 kept changing as the mouse was hovering over the list of client references in the combobox)
View 4 Replies
View Related
Apr 7, 2014
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
View 1 Replies
View Related
Jul 21, 2009
On a sheet named "Matrix" I have rows of data in columns A, B, and C. I have the following code in a ComboBox that will show names from column B of the Matrix sheet.
View 3 Replies
View Related
Jan 5, 2008
There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
View 4 Replies
View Related
Aug 11, 2008
I want to select a customer name from a ComboBox in a UserForm and populate a TextBox with additional customer information for the end user. The additional customer information is always located in C3 in sheet2 (the result of a formula). However, the text box only refreshes when I click into it. Is it possible to have it refresh without clicking into the userform textbox)? I’ve tried _Change and _Afterupdate. I'm sure this must be easy for anyone but a novice like myself. Sample attached (play marco...button dead?).
Private Sub ComboBox1_Initialize()
Me.TextBox1.Text = ""
End Sub
Private Sub ComboBox1_Afterupdate()
Me.TextBox1.Text = Worksheets("Sheet2").Range("C3").Value
End Sub
View 5 Replies
View Related
Oct 26, 2003
I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.
View 7 Replies
View Related
Jun 12, 2006
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
View 9 Replies
View Related
Jun 25, 2003
I have created a userform with several comboxes in which the user can select a value which is in the worksheetrange a1:a70. Now what I want to do is, when the user selects a value I want a textbos to be filled with the value out of the cell next to it. (if user selects a5 I want the textbox to be filled with the value in b5)
I've several values which you may be wanting toknow
Rowsource: a1:b70
Columncount: 2
Boundcolumn: 1
Controlsource: D1
I now expect to do something on exiting the combobox like:
Private Sub ComboBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
TextBox9.Text = ComboBox2.Value
End Sub
View 9 Replies
View Related
Jun 17, 2014
I have a list of departments on "Employee Data" sheet on column A and list of staff names on column B. It looks like this:
DEPT FULL NAME
pdi Bob Tan
pdi John Christian
aftersales_bikes Jim Yeo
I have 24 departments in total and 300 over employees in mt employee data sheet.
On "Jan - June 2014 Training Hours" sheet, when employees attend training courses, I will have to update what courses they went for, no of hours etc.
My problem is:
I would like to select the department (using combo box for the auto complete function) and when department is selected, the staffs in that particular department will show. I have attached the file for your understanding. Currently, I am using data validation with indirect function in that file but would like to switch to combo box.
View 2 Replies
View Related
Feb 17, 2014
I have a userform used to input data. I contains textboxes and comboboxes and a command button that is clicked on to record the data onto a worksheet.
What I am looking for is a combobox that is linked to a list of clients (column A of worksheet "Clients").
I would like the user to click on the combobox and select a client name. If the client is new then I would like the user to be able to type in the new name and, then have that name available in the "Clients" names that appear the next time the user clients on the combobox.
I have it almost working, but not quite.
I have a defined name on the "Clients" worksheet as follows:
[Code]....
View 5 Replies
View Related
May 26, 2007
I have a cell range with the following data:
A 1 2 3
B 4 5 6
C 7 8 9
On another worksheet, I have multiple comboboxes from the Controls toolbar in a column, each having possible selections are based on the data in a column 1 above (ie. A,B,C). When a selection is made in any of these comboboxes, cells to the right of the combobox get populated with the corresponding remaining data from the above cell range - ie. when A is selected, 1,2,3 appears to the right of the combobox, when B is selected, 4,5,6, etc. I want to be able to make selections from within combo boxes, not only by using the combo box dropdown and select mechanism, but also, if possible, by pasting a cell range whose data matches one of the existing selections available in the combobox definition. In other words, if I have a single column cell range from somewhere with the following data in 1 row:...............
View 2 Replies
View Related
May 30, 2007
I am programming some kind of database in excel and using comboboxes as drop down lists to enter some of the information in the DB. My problem is that when the file is saved, closed and then opened again, all of the comboboxes have lost their selection. I think that using the ControlSource might help but for some reason I can't find the proper syntaxe to make it works. Actually I am getting a Run time error 438: This object doesn't support this property or method.
I have included the relevant portion of my code below. Is the ControlSource property going to solve my problem? If so, what is the syntax I must use? If not, what can I do to make sure that my ComboBoxes are going to keep their selection?
ActiveSheet. OLEObjects.Add(ClassType:="Forms. ComboBox.1", Link:=False, _
DisplayAsIcon:=False, Left:=hori_offset - 220, Top:=vert_offset + 78, _
Width:=180, Height:=24.75).Select
With ActiveSheet.OLEObjects("ComboBox1").Object
.Font.Size = 14
.Font.Bold = True
.Style = fmStyleDropDownList 'Use drop-down list
.BoundColumn = 0 'Combo box values are ListIndex values
End With
With ActiveSheet.Shapes("ComboBox1")
.OLEFormat.Object.ControlSource = "Q1"
.OLEFormat.Object.ListFillRange = "M1:M8"
End With
View 4 Replies
View Related
Jul 3, 2009
It's a customer form where I need the contact person (txtContact) to be filled out when selecting the customer (in the cboCustomer).
The data is listed on the sheet "Customer", where all the customer names are in column from B2. The contact names are from C2 in the same sheet.
I have made a list in the namemanager called Contactlist (=OFFSET(Customer!$C$2;0;0;COUNTA(Customer!$C:$C)-1;1)
I have this VBA for getting the customer to the cbobox
View 9 Replies
View Related
Mar 3, 2009
I have browsed this subject on the thread but I did not find specific answer to my problem. I am into inventory of items and I have created a userform and placed a combobox (as dropdown list for me to choose the products) and a text box for my qty input. Will you kindly help me put the right code if I choose product A in the combobox list the textbox entry will fall into the same row as the product on the appointed column in the excel sheet.
ex.
PRODUCT NAME QTY
A 25
View 9 Replies
View Related
Jul 18, 2014
There are two Combo boxes in the form. ComboBox1 is being populated from a named range - "ParticipantName". (Located in Sheet1!C2:C500) ComboBox2 has been populated with "No" and "Yes" with additem in Form1 Initialize.
There are 3 (Three) Command Buttons - "Save", "Cancel" and "Close".
"Cancel" shall clear data in both Combo Boxes. It is done.
"Close" shall unload the Form. It is also done.
My problem is with the "Save" button. The user will select a name in the ComboBox1 and Select "Yes" or "No" in ComboBox2. Then if the user press "Save"; only the selected data of ComboBox2 will be written in the 26th Column (Column "Z") of Sheet1 in respective Row of the name selected in the ComboBox1.
View 1 Replies
View Related
Mar 28, 2009
I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
View 10 Replies
View Related
May 8, 2009
In this file, I have a Work Summary worksheet in which I'm extracting some data from the other worksheets to "summarize" all jobs into one nice work summary log On Basis of Average of data from 3 other different sheets A,B,C
The following form works great to if onyl formula calling is applied
=AVERAGE(INDIRECT("'"&$C6&"'!c3:c7"))
C6 = Worksheet name or Worksheet tab name ....
View 8 Replies
View Related
Dec 9, 2009
Is there a way to filter a listbox from the selection in a combobox?
View 2 Replies
View Related
Mar 22, 2012
I'm using two comboboxes to simplify data query of a database: the first narrows the query by displaying employee names, the second narrowing the selection further by displaying the equipment that employee owns. I am able to populate both comboboxes fine.
The first combo box for employee names:
Code:
Private Sub UserForm_Initialize()
Dim ws As Worksheet
Set ws = Worksheets("User&EquipOverview")
[Code]....
Where I am running into trouble is that I want the selection made with the equipment name combobox (ComboDevice) to populate several textboxes with values related to that specific selection in the database. That is, the combobox population needs to have the cell location included as information to pull the correct information.
Each employee has several pieces of similarly named equipment, so it's not so easy as to search the initial list for the value of the combobox selection.
View 1 Replies
View Related
Nov 22, 2013
How do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
View 3 Replies
View Related
Feb 5, 2008
I have got 8 sheets in a workbook having the following names first one is Main,and others are Aw,Nzm,Mhk,Gul,Qta,and Hdr.
I want a ComboBox in every sheet displaying names of all sheets in combobox and when i select a name of sheet from combobox it goes to that sheet after hidding sheet where selection was made and running macro codes which i have developed for sheet. I want only one sheet display on the screen when one selection is made other one is invisible.
View 9 Replies
View Related
Dec 25, 2009
I have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics:
Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.
View 9 Replies
View Related
Jun 8, 2006
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
View 9 Replies
View Related
Jun 11, 2006
I have a computer build worksheet I use to configure the cost of my notebooks.
There are 2 worksheets, on one I have all my data seperated in 2 colums. One column is the name say Intel Core-Duo 2500 2.0 Ghz, and next to it the price, say $300.
The other worksheet is the actual form for "building" my systems. Right now I am using combo boxes that feed their output to another cell, then a 3rd cell with complex nested IF statements to retrieve the data from the 1st worksheet.
This way I have the form look like
1. Combobox selection: Intel Core-Duo 2500 2.0 Ghz
2. It feeds a second cell its value 1 (if this is the first value in the list)
3. 3rd Cell reads second cell value with a complex nested IF statement: 1 and goes back to the data sheet and reads the price from the second column: $300
This is a total pain in the butt when I want to add products or change their order in the data sheet. Can someone point me to a direction that this could be made easier, a good book on the subject and what I should be looking for and whatever syntax I need.
Here is the file: [url] You need to have iterations set for the sheet to work properly because there are circular references to calculate percentages of the total for shipping insurance paypal fees and ebay fees etc.
View 3 Replies
View Related
Jan 25, 2007
I have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.
View 9 Replies
View Related
Jul 6, 2007
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
View 4 Replies
View Related
Jul 23, 2013
I'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
View 2 Replies
View Related
Feb 17, 2007
creating this excel file with multiple comboboxes, i was wondering if i can add another into the equation. so i can have sub-categories.
i have attached the original file and how i would like to change the layout!
i also have another question, see with the info that would go into the textbox is there anyway you can put writing on seperate lines,
eg:
Lettuce
Mayo
Tomato
all within the same cell?
View 13 Replies
View Related
May 27, 2008
Is there a function that reset all the combobox and textbox at once?
It is because I have changed my userform and now there is nearly 100 combo and textbox in it.
View 9 Replies
View Related
