I want to open a file (Sam) if a a condition is fulfilled.
So, my file Sam.xls has a sheet named "Control" (veryhidden), the cell A1 has value (A1=5)
When I open Sam file, the code checks another file DOT.xls (the user should not see this process) and if it finds the same value in Sheet2 (veryhidden), cell A1=5, the file Sam to be opened.
If the code does not match the values the Sam file to be closed, Sheet "CHIO" to be deleted and the application closed.
I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
I have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
Dim myname As String myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook. The Quickbooks file opens fine. The Excel workbook never appears to open but I do get the full file pathname to my excel workbook returned which I then parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I would like to have a popup appear on the opening of my spreadsheet that warns me of things that are past due or due today. I would like it to be in list form...
For example my source is: Customer 1 Customer 2 Topic Expected Complete Expected Complete
One 05/18/2007 05/10/2007 Two 05/12/2007 05/15/2007 05/18/2007 05/18/2007 Three 05/12/2007 05/17/2007 05/16/2007 Four 05/21/2007 05/17/2007
What I would like to see is a popup that analyzes this data with the result of:
If run today...5/18...................................
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez() Dim IE As Object Set IE = CreateObject("InternetExplorer.Application") IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com IE.Visible = True While IE.Busy DoEvents Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()" 'this is the name of the download link as from when i hover my pointer over download link. End Sub
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box for ex: I have some files located in my local drive as below
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
I've got a couple of formulas in a workbook which lookup values in another workbook. When I reopen the initial workbook the formulas results come back as errors (i.e. #VALUE!) unless the workbook it is looking at is also open. This is not desirable, does anyway know how I can lookup values in another workbook which are not open? The formula which is causing me problems is as follows:
I've encountered a bit of an odd one. I am opening a tab delimited file, which has been sved as an xls. When I open from file manager, it opens correctly. When I open from Excel, I have to go through 3 screen dictating how the data is set up, and the end result is that a couple of the numbers come through as text, rather than numbers.
Failing an explanation - how do you open workbooks as file system objects - currently I am opening them using
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example; The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"... I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"... The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks If wb.Name = "P'Binder L&T Pages.xls" Then ........................
I have a workbook were a user will write down some info. Then I need to copy that data to a second workbook located anywere in the Hard drive. i used the function "GetOpenFilename" or the "Application.dialogs(xlopenfile) to ask the user where is the file (and open it). Now I need to get the name of that file. How can I get it?(the name of the file the user selected to open). P.S. I saw there is somewhere a "Print" function to copy data from a workbook to another closed workbook. I was planning to have both workbooks open and then just use several lines like:
I need a code to open a file automatically based on file name, for example if the active file name is "trial", then it need to open another file named "trial1" based on which the macro will run, because I have two set of files and I want to compere daily with two users. for example the file names in Set a- iron, cement, stone, sand where as the set b-iron1, cement1, stone1, sand1
What I would like to do is to open an excel workbook from a bat file in dos with one arguement.
so something like
start c:lacklist.xls 2315t
Once the blacklist.xls is opened I would like to have the macro to save the excel file as a csv file ignoring all the prompts and use the argurement 2315t as the directory to save it to on the j drive ie save to j:2315tlacklist.csv. Then close the workbook and continue with the rest of the commands in the bat file.
I'm guessing I have to use GetCommandLineA to read in the arguement but I can't find anything on the net that gives a clear explanation of how to use it.
I need to find a value in a pivot table with a range of values over 12 months (Book5) when 3 criteria are met, Branch#, LOB# and Month#. Sum(if() works for the 1st month, but I do not know how to do the coding when the month changes.
Attached are copies of the two files I am working with and my coding so far....
Workbook A has VBA code. The VBA code opens a collection of 2000 workbooks. The workbooks are processed one at a time, with Workbook A opening Workbook B, do something, close Workbook B, get next workbook. Sometimes Workbook B has some kind of access issue that results in:
"[File Name] cannot be accessed. The file may be read-only, or you may be trying to access a read-only location. Or, the server the document is stored on may not be responding. RETRY ... CANCEL"
If RETRY is clicked, the process returns the same message. If CANCEL is clicked, the process is crashed, Excel is closed, and all data processed is lost. What is the VBA syntax to programmatically trap this condition so it can be processed in an orderly manner?
I have 1000 workbooks in a folder, each workbooks format is same. as of now I open each workbook, and check if values in A10 is equal to B10, that is if the value in A10 is "100" I will check if B10 is also "100" if not I will make a note the file name.
I have more than 1000 workbooks in a folder, It is really difficult to open and check if the values are same. is there a macro, which will check the condition A10 = B10, if not get the file name in one sheet.
I use Excel 2003 on a Windows XP operating system. I update a rather large xls file (5.9 mB) daily. I saved an update yesterday, but when I went to open it from my directory today, nothing appeared.
The file is listed, with its properties, in the directory, but when I request the file, Excel opens, nt the file.
None of my other files seem affected. They open normally.
i would like to open .txt file into already existing excel sheet.
i have 2 sheets, sheet1 and sheet2 in sheet1 i want to import a Report.txt file from this path- D:sample in sheet2 i want to import Report1.txt file from this path - D:Sample
i want the text files to be opened as excel files in the specified sheets........
I'm using the following code to loop through all excel files in a folder and collect data.
Code: ' Open the file dialog Set diaFolder = Application.FileDialog(msoFileDialogFolderPicker) diaFolder.AllowMultiSelect = False
[Code]....
Do While sFil "" 'will start LOOP until all files in folder sPath have been looped through However, comep of the files have the string 'comp' in the title. I don't want those.
Can I add a qualifier to the above t=code that basically says: If the file name contains 'comp' then ignore it?
