I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies
I currently have a report that I have code on that will change the color of a cell based on whats in the cell.( Code posted below) However I also need to look at $J and if the first letter of the value in that column is a "z" then I would like to change that whole row to icolor 13 (purple).
For example J14 might be "Z-Thomas". if it does I would like that row 14 to change to purple.
Also I would prefer that the solution be in VB, so that we do not have to do something in VB with the fix below AND do something in Conditional Formatting.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("$A:$E")) Is Nothing Then
Select Case Target
Case "y", "Y"
icolor = 4
Case "n", "N"
icolor = 3
Case "?"
icolor = 6
I'm setting up a spreadsheet for work and i have a question. I'm not familiar with the formulas. If i want to set up a formula to where if i type "complete" in the cell it will move the entire row over to the next sheet.
View 2 Replies View RelatedI have 5 cells on a sheet. When one has an X in it the other 4 go blank. It so I can keep track of who has ownership of a job.
View 6 Replies View RelatedI have 2 sheets, sheet1 and sheet2. On sheet1 I have a cell (w,3) which displays either "OK" or "Needed". It will be like this for every row on the sheet. On sheet2 I have more information. I have been trying to create a macro or VB function that everytime the workbook is opened will scan the entire column W for any that say "needed" and if/when one is found copy the data in the cell in column A of the same row from sheet1 to column A of the first blank row in sheet2.
So say cell w,6 displays "needed", I then want to have cell a,6 copied from sheet1 to sheet2 into the first column A that is blank. I don't really care if when w,6 changes to "OK" it removes the entry on sheet2 or not, in fact if it does that would be great.
Here is the code that seems to be not so complicated and has copied information from one sheet to another, can't get it to work consistantly. I copied it off a similar post on this site and am not sure what the last value = "1" is doing but I doubt its helping my cause. The cell I need to trigger the action is in the 23 column, the cell I need copied is always in the first and the cell I need it to be copied into on the 2nd sheet is always in the first column as well. I'm pretty good with regular logical statements but I feel that a lack of knowledge about all the available commands is really whats hurting me on this....
Two Sheets:
1) Top Sheet
2) IRA
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A:
____A__________|_B______________________
4 | 09/22/2005 | $ Total as of date in A4
5 | 10/06/2005 | $Total as of date in A5
6 | 10/20/2005 | $Total as of date in A6
7 | 11/03/2005 | $Total as of date in A7
8 | 11/17/2005 | $Total as of date in A8
9 | 12/01/2005 | $Total as of date in A9
10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range:
____A__________|_B______________________
6 | 09/22/2005 | $100
7 | _ _ _ _ _ _| $200.................................
I´m trying to do a macro that changes the color of all fonts in a row if the cell in the column "R" has the date lower than a specific one, something like this:
Dim Data2 As Date
Data2 = Sheets("Sheet1").Range("today")
Range("R12").Select
Do While ActiveCell <> ""
If ActiveCell < Data2 Then
ActiveCell.EntireRow.Select
Selection.Font.ColorIndex = 3
Else
ActiveCell.Offset(1, 0).Activate
End If
Loop
But it just don´t work. The macro does that in the first row, than it stops. Do you have another code for this, or another way to do?
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
I need to change automatically the color of a cell (let say A1) to green if the cell content is YES and to red if content is NO. Which function to use?
View 2 Replies View RelatedUsing conditional formatting is it possible shade an entire row when a cell is = to 0. I am currently creating a spreadsheet for a small amount of inventory. I am manually editing the amount of product available.
What I want to happen is when I replace them number with the text ‘Sold Out’ I want then entire row to automatically grey that row out. Is it possible to make this happen using conditional formatting?
fill color of autoshapes on condition depend on cell value
View 1 Replies View RelatedI set format condition in range by tool bar(=if formula is yes then display cell.interior.colorindex=3), but I have no idea how to find out (.address) the red colour cells are displayed in range with VBA?
View 5 Replies View RelatedAfternoon everyone i am having abit of trouble working on an excel 2007 spreadsheet. In cell I1 i have a tab called Color. i want the cells below I1 to be filled with one of 3 colors green, yellow, or red depending on whats in cell F "Status" (closed or open - in progress) and cell G ECD for estimated completion date.
Green - i need it to fill green if status is closed. Yellow - need it to fill yellow if ECD is any date greater than today and if status is open. Red - need it to fill red if ECD is todays date or older and status is open.
I have a conditional cell that change color or not if condition...OK so far. Now, how can I change the color of a range of cells when condition is in just one cell. Ex:
If C15>=150, change (C3;C20) to yellow.
I really can't find the way to do it.
I have a selection on a worksheet that has 4 consistent columns (A, B, C, and D) each with a variable number of rows all containing string type data. With this data I want to use Conditional Formatting so that when I have a string value of X in column D for any row, that whole row with the X in column D has it's color change to say grey, this should happen regardless of what strings are in Columns A, B, or C.
Below is the way I've been trying to do this thus far and failing, when I run this code below I can only get it to grey out the cell with the X not the whole row.
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlCellValue, Operator:=xlEqual, _
Formula1:="=""x"""
Selection.FormatConditions(1) . Interior.ColorIndex = 16
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
formula to find the last number in a cell and if that number meets a condition put a letter in the adjacent cell.
In cell A1 I have numbers as such 254671 (these numbers vary in length but not normally more than 8 in length). I want to know if the last numeral on the right is a 1 and if so then enter in the adjacent cell (B1) the letter y if not then leave blank.
I have a spreadsheet with about 225 sheets or so containing data. The date is in column J. I am needing to delete all the Rows that have a date greater than or equal to 06/06/08 and loop through all of the sheets.
I recorded a macro to find the date 6/6/2008, then highlight the row, then select the next 450 rows and delete them and it worked ok, but I don't know how to get it to loop through the sheets to the end.
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I'm trying to Multi-Select rows in order to format all rows, in "One Step" if the cell in col. "A" = 1. I managed to write the hereunder code but I'm still frastrating because I don't like the first RNG setting command. How can I avoid declaring RNG as row(1) and still be able to run the code. I assume I need some other Range set for RNG which, unfortunately, I could'nt find and the command I used includes row1 in RNG although cell A1 = 5.
Sub Conditional_Multi_Rows_Select()
Set RNG = Rows(1) ' this is my problem
LR = [A65536].End(xlUp).Row
For R = 1 To LR
If Cells(R, 1) = 1 Then
Cells(R, 1).EntireRow.Select
Set RNG = Union(RNG, Selection)
End If
Next
RNG.Select
Selection.Font.Bold = True
Selection.Font.ColorIndex = 3
End Sub
I had in mind to use:
Set RNG = Rows(65536)
but this will not make it a "neat" vba code, either.
I have a userform that should open a file and then figure out if a integer meets a condition. All this works.
My problem is that i want to run another sub from this userform after the file is open(this will be the active file).
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
i am trying to get my excel formula to say if 2 date ranges in my excel workbook are the same (in seperate worksheets) to put a value from a certain cell into another cell in another worksheet. This is all in the same excel application...
The first step i have taken are:
1) if the 2 date ranges are the same to say 'true' if not 'false'
I am trying to get a forumula to say "if it is true to put a value from a different cell into another cell (both in different worksheets) but the same excel application...? but if its false to move on to the next date
I am trying to come up with a simple formula to count a single cell if it contains either a 2 or 3.
The cell can contain numbers ranging from 0-8.
Even better would be if I could some how evaluate single cells based on the contents and then count the number of cells where the criteria for contents is true. The problem is the criteria differs from cell to cell (i.e. D2 could = 2 or 3, but E2 needs to be counted only if it contains a 4 or 5).
I know COUNTIFS only evaluate a range but it would be perfect if I could somehow get it to work for single cells. COUNTIFS(D2,2,D2,3,E2,3,E2,4,F2,2)
I'm using the following on the Worksheet_Activate event to update rows with the date, (Cell AD1 contains the current date):
Code:
Range("X2:X2000").Formula = "=IF(IF(ISBLANK(W2),,$AD$1)=0,"""",IF(ISBLANK(W2),,$AD$1))"
Is there a way I can amend it so it only updates those cells which currently have no data?
At the moment it is changing every cell with the date which overwrites existing dates - I want it to update the new stuff only.
Say I have a column of cells filled with numbers that are ascending. What I would like to do is to pick out the first cell that meets my condition. For instance, these cells contain irrational numbers that increase from 0 to 100. I would like a formula to pick out the first cell that exceeds 10.2, and to return the row number of that cell.
In the case of descending numbers, if I would like to pick out the first cell that goes below 10.2, would the formula be the same?
I want to scan all sheets in a workbook and to delete a first row where a value in cell(1,1) is "table".
Sub DeleteFirstRowInWorksheet()
Dim SheetName As Worksheet
Dim i As Integer
For Each SheetName In Sheets
If Range("A1") = "table" Then
Rows("1:1").Select
Selection.Delete Shift:=xlUp
End If
Next SheetName
End Sub
It delete only in an active sheet. What's wrong?
The merged Cell B6:G6 will receive a ten-digit number followed by a dash and then one or more numbers. (For example: 1234567890-123)
Cell B15 will then receive data shortly afterwards. I already have a validation macro for this cell which allows either 'I' or 'I I I'.
Upon exiting Cell B15, merged Cell B16:H16 needs a macro which will check Cell B15 and if it contains 'I', Cell B16:H16 will display the data from the ten-digit number entered in Cell B6:G6 minus the first five digits. (For example: 67890-123)
Now the data in Cell B16:H16 can only be somewhat editable hereafter. It can be erased or replaced with numbers in smaller or greater digit combinations than five before the dash (i.e. 67890-123 can be replaced with 123456-7), and digits can be added after the whole group (i.e. 67890-123 & SEE DWG) without any error messages. But if any five-digit number with a dash and some numbers exist in Cell B16:H16, they must correspond with the number in Cell B6:G6 minus the first five digits.
However, if Cell B15 ever receives a 'I I I' afterwards, all data in Cell B16:H16 must be erased. Cell B16:H16 can never contain data if Cell B15 contains 'I I I'.
Also, if the data in Cell B6:G6 changes later on, the corresponding digits in Cell B16:H16 must change as well, even if there are digits after the whole group.
So here is an example of what a good macro would do for me: ...
We were so close!. But it appears that the assumed correct answer only works if there are no repeating N. The repeating N gets the same count as the last Y and it throws off the sum ....
View 14 Replies View RelatedI have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
