From what I understand there's no way to do this without using macros. I would perfer not to use macros, but I need my PivotTables to auto-refresh anyways and apparently that will require a macro, so oh well. I'm very new to macro coding so I can't seem to successful apply any of the previous threads about this to my sheet.
I just need my pivot table on sheet "Customer" to filter the customer field based on the value in cell C1. Also I need to make sure the sheet doesn't "freak out" if the value in C1 is either blank, or is a customer value which doesn't exist in the table. Preferably in this scenario it would display nothing on the pivot table, but I don't know if that's possible. I want the sheet/macro to allow an invalid filter value in C1 just so the sheet doesn't lock up until it is corrected.
I also need my workbook to auto-refresh all the pivot tables is that's easy to code in as well.
I have a worksheet ("VillageReport") that contains several pivot tables. All tables are from the same data source and all pivot tables have "Location" as the first column field. I would like for the tables on this sheet to automatically be filtered when I select a village name from a drop down menu in a cell on this worksheet (C1). So, for example, when I select "Tarzana" in C1, the location field of all pivot tables on this sheet will show only Tarzana (all others are deselected).
a Macro for this? (I have already set up the drop down menu in C1). I have found some examples online but can't seem to adjust the code to fit my workbook. I am not very familiar with VBA.
I have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
I have the following code to update a pivot table:
Code: Dim pt As PivotTable Application.EnableCancelKey = xlDisabled For Each pt In ActiveWorkbook.Worksheets("sheet1").PivotTables pt.ChangePivotCache ActiveWorkbook.PivotCaches.Create _ (SourceType:=xlDatabase, SourceData:="source!R4C1:R33443C55" _ , Version:=xlPivotTableVersion10)
the R33443 term is what will be changing, the columns and the starting row should stay the same. is there a way to instead of using R33443, to enable the range to be changed based on a cell value?
I'm trying to have a command button clear all filters on a pivot table (PivotTable1) and apply a new filter equal to a cell value (C4). If the cell value can't be found I want the filter to equal "No Meeting". I'm trying to recycle the code from another workbook I built a long time ago, I just can't get it to convert to this application.
Code: Dim County As IntegerDim pvtTable As PivotTable Dim pvtField As PivotField Dim pvtItem As PivotItem
I have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
I've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
I want my report title is more dynamic which is based on the pivot table's <Status Date> filter. It mean if I select the <Status Date> filter option as 6-23-2014. Then the report title will automatic update as "Statistic Report 6-23-2014" instead of I have to change the date each time I run the report.
I have this code for setting a filter on my pivot table to show all data occuring after a certain date. Is there a way to add code so that instead of it saying "Value1:="31/10/2011"" that it would work out the last day of the current month and use that.
I need to filter a pivot table based on a field property. Sort of strange, but the database I get the PivotTable data from returns the Week in the accounting month. as the field name. It has several properties which I have figured out how to expose including the period end date. Now I need to figure out how to filter the PT based on that.
The following shows the property:
Code: ActiveSheet.PivotTables("PivotTable4").CubeFields("[Time]").AddMemberPropertyField Property:="[Time].[Week in Month].[End Date]
Now if I just knew how to filter with that value I could move on the the next issue ....
I have a summary worksheet, which has a drop down cell. on another tab I have a few pivot tables, is there a way I could get one of the pivot tables to auto filter based on the selection in the summary worksheet?
How to use an array of multiple values in code I want to use the array of values "jan" "feb" "mar" in the code instead of "jan"
Code: Private Sub Worksheet_Activate() ActiveSheet.PivotTables("Pivottable1").PivotCache.Refresh ActiveSheet.PivotTables("Pivottable1").PivotFields("cat").ClearAllFilters ActiveSheet.PivotTables("Pivottable1").PivotFields("cat").PivotFilters.Add _ Type:=xlCaptionDoesNotEqual, Value1:="jan" End Sub
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I have two fields where users enter a security identifier (cell P1) and the declaration date (cell P2) and i'd like to be able to pull all the records from the master table (A1:K10) where the security id matches (column H) and the request date (column C) is <= the declaration date (i've attached a sample file for your reference). I tried using a pivot table but it doesn't let me filter for "less than or equal to" values for the request date.
I have a macro to refresh all pivottables in my workbook. Each pivottable source from the same data pool - in addition I have a filter on each pivottable. Is there a way to fix this filter, such that once the source data is updated, the filter doesn't change? Or to only refresh the "data" in the pivottable?
My code for refreshing all pivottables is given below.
Dim pvt As PivotTable Dim sh As Worksheet Application.Calculation = xlManual For Each sh In Worksheets For Each pvt In sh.PivotTables pvt.RefreshTable Next pvt Next sh Calculate Application.Calculation = xlAutomatic
I have a list of customer satisfaction scores that are pulled in from a sharepoint list. The list is then used to create a pivot chart that is used in a web part on a dashboard in sharepoint. The chart is supposed to show average customer satisfaction scores per category per month.
The problem I have is that I can't filter the categories using a slicer, I can only filter the categories' values (i.e. the scores). I can filter by date though.
When I try to filter the various score categories/series (Support, Change Management etc) I only get the option to filter their values i.e. 1,2,3,4,5.
I want to be able to use a slicer or similar to be able to display either all of the series or just selected ones.pivottable.JPGpivotchart.JPG
I use a spreadsheet to extract data from an access database. When the data is extracted it has about 10k line items and one of the columns displays the date. I formatted the cell to simply display the month (Jan, Feb, Mar, etc). When I create a PivotTable with the 10K line items each line displays the month. When I use the date as a filter it displays every single lines month in the filter box. Is there any way I can combine the months in the filter box so that each month would only display once collectively instead of for each line item?
I have a workbook with several worksheets and several pivot tables. Based on the selection from a drop down box on the first tab, I want to automatically filter pivot tables on subsequent tabs. Is that possible?