Using A Named Range In Data Validation
Feb 11, 2010
Is there any way to use a Named Range in the "Source" field in a Data Validation? I have multiple sheets in a workbook that have the same layout, and I am using alot of different Data Validations. My problem is that whenever I need to change, or add a choice to one of these, I have to go to each sheet and change the Data Validations that are effected by that change. Is there a way to use a "Named Range" or something to put all of my acceptable choices, for that Data Validation, in one spot. And make any changes I had to that field.
View 2 Replies
ADVERTISEMENT
Jan 28, 2013
I have a cell for which I need the only options for data to be entered from a list in two different tabs from which I understand cant be done but is it possible to have two drop down options for the same cell?
The attached spreadsheet should explain this slightly better...
View 9 Replies
View Related
Nov 7, 2012
If I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
View 2 Replies
View Related
Oct 30, 2012
I have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
View 7 Replies
View Related
Oct 27, 2013
I've set up a Named Range that refers to an array of constants, e.g. MyRange ={1,2,3,4,5}. This appears to be fine since I can output the named range to a range of cells in a row (e.g. A1:E1) and see 1,2,3,4,5 (one value in each column).
I'd like to use MyRange as the source for a Data Validation list in a cell.
Normally data validation list sources must be vertical, so I've set MyRange =TRANSPOSE({1,2,3,4,5}). This appears to be fine since I can output the named range to a range of cells in a column (e.g. A1:A5) and see 1,2,3,4,5 (one value in each row).
When I set MyRange as the source for data validation however, it resolves to an error.
why this setup doesn't work?
Workbook detailing the problem attached. Attachment 273788 NamedRangeDataValidationArrayConstansts.xlsx
View 3 Replies
View Related
Nov 13, 2006
In the attached example I have a column of data on worksheet 2. Extra rows will frequently be added and removed from the column. I want to use that column of data to populate a validation drop down box for a whole column of cells on sheet 1. (Target cells coloured yellow for demonstration purposes)
I don’t want the validation drop down to be full of blank rows so I set up a dynamic named range to refer to the column on Sheet2. It all works really well...but...only for cell D6 on sheet 2. It doesn’t work on any of the other target cells on sheet 2 or on sheet 1. I have been looking at this for far too long and it has begun hurting my brain.
View 2 Replies
View Related
Dec 5, 2007
I'm creating a sheet that takes three Validation Lists into account. The first two lists are based on named regions. The third list uses the first two lists to narrow a search down so that the user can pick what they want from a smaller selection. I'm using the code from Contextures.com to allow the user to double click the validation list to pop up a Combo Box. This allows me to show more than 8 selections at a time and also gives a little freedom on font and font size.
http://www.contextures.com/xlDataVal11.html
Since the third list is not based on a named region but rather code to compare the two previous lists, when I double click the third validation list a blank combo box pops up. it possible to pop up what ever lists are in the validation boxes.
This is the code that I have in the third validation box which States "The Source Currently evaluates to an error" but works fine for some reason. =OFFSET(CategoryStart, MATCH(B4, CategoryColumn, 0) - 1, IF(A4 = "Description", 2, IF(A4 = "ExtDescription", 3, IF(A4 = "PartNumber",4))), COUNTIF(CategoryColumn,B4), 1)
I tried making a named region that was based on the code, so that the list could change as the user selected different options from the first two lists. This gave me the same problems as I had before.
View 2 Replies
View Related
Feb 25, 2009
I've got a named range which defined using a custom function. Lets call this named range [range1] which is defined by:
View 14 Replies
View Related
Jan 18, 2013
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
View 2 Replies
View Related
May 8, 2007
I want to validate data in a cell, using a list of two named ranges, so that in dropdown box the items from first range and then the second one are shown.
View 7 Replies
View Related
Aug 7, 2014
I am unable to use dependent data validation lists using the INDIRECT function when the initial named range is a dynamic one.
See attached.
The named ranges 'Men','Women','Children' are all dynamic based on number of entries in each column order to accommodate a growing list, whilst also not having blanks in the dropdown (hence I haven't used entire column ranges). The named range 'test' is a static one.
Column H has a dependent data validation based on entry in Col G. This works for the static list, but not the dynamic one!
View 4 Replies
View Related
Oct 20, 2009
I am trying to apply data validation to a column of cells using named ranges. However, each row has a unique associated named range. For example:
A_______B
Birds____*
Dogs____*
Cats____*
I can easily apply data validation to these three rows separately using named ranges.
Ie three separate named ranges:
=Birds
=Dogs
=Cats
However, I need a way to quickly apply data validation to column B using different named ranges for each row because there are about 2,000 rows. Is there a way to reference text in the cells of column A that contains the name of the named range? Or maybe a bit of VB code that could do it quickly?
View 3 Replies
View Related
Mar 25, 2014
Can you create a Pull-down List that contains data from Multiple Ranges.
If I have a List of Names Running down column A (A2:A10) another List of Names Running Down B (B2:B25) and a Third down C (C1:C15) each of them named Ranges ("List1", "List2" & "List3"), can I create a Pull-down list in Cell A1 that would include the names from all three ranges?
View 4 Replies
View Related
Feb 26, 2008
is it possible to refer to more then one named range in my validated list's source field? If not, how can i make more than 1 named range to be the source of my validated list.
View 9 Replies
View Related
Sep 25, 2009
I can use a dynamic named range and a direct reference to the name and the DV works.
I can use a standard named range (not dynamic) and an INDIRECT() reference to a cell with the name of the range in it and the DV works.
But if I try to use a dynamic named range and an indirect reference to a cell with the name of the range in it, the DV fails.
Any workarounds out there? This project includes a LOT of DV lists, getting them to self-maintain is important if I can do it.
View 12 Replies
View Related
Jul 28, 2014
Is there a way to add cascading lists (from data validation or form/activex controls) to my excel spreadsheet WITHOUT using named ranges? Maybe structured references?
I need to avoid the named ranges because it will cause my workbook to have duplicate named range titles which I cannot avoid.
As a general example my issue arises because I have something like this where the titles are the same but they map to slightly different data. These also have to be cascading because the titles align to another list which I do not show in the example. I also considered using pivot tables, but the issue there is that the data validation lists repeat in the same worksheet. So I would have 3 cascading lists in row1 dependent on each other, but the same 3 lists in row2 dependent on row2 but not the previous row.
[Code] .....
View 3 Replies
View Related
Nov 10, 2008
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String)
Dim DVListName As String
DVListName = "DV" & sListName
Application.Goto Reference:=sListName
With Selection.Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
View 4 Replies
View Related
Dec 15, 2007
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
View 9 Replies
View Related
Jun 15, 2007
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
View 4 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Dec 13, 2008
I have 30 worksheets in a workbook in which the first sheet is called summary. The summary sheet has 29 formulas with all named ranges, so one named ranged per worksheet. The issue I have is when i clear old data and add new data every month, the named range changes on some worksheets not pointing to the correct range as previous month file even if I have $
View 9 Replies
View Related
May 24, 2013
Filtering data using named range
Code:
Sub FilterNamedRange()
Sheets("Des").Range("A2:E10000").Delete
Sheets("BASE").Range("A1:E10000").AdvancedFilter _
Action:=xlFilterCopy, _
CriteriaRange:=Sheets("cri").Range("Extract"), _
CopyToRange:=Sheets("Des").Range("A1:E1"), _
Unique:=True
End Sub
View 8 Replies
View Related
Sep 25, 2007
I have created a macro (data on the left hand side) that allows me to copy data and paste it into an sql file. The problem i am having is that the data varies (e.g. data on the right) so this doesnt actually work. i was thinking of naming the values within the name ranges and then writing code to see if i can copy particular named range values but i dont know if this will work.
View 9 Replies
View Related
May 7, 2009
I have a range of data that is compiled from various cells that I have named as Range1. I then have another named range - Range2 which should be items selected from range1 and copied into range2. This is to enable other work to take place.
I have created an example userform with Range 1 shown but do not know the code to copy it over using a command button. Range 1 should not change. Also vice versa if possible i.e. remove the selected item from Range2 with another button.
View 5 Replies
View Related
Mar 14, 2012
I have a named range TOT_BUDGET. We use the current month number to access this range's index for current budgets.
=INDEX(TOT_BUDGET,3)
My quandary is that I need to calculate the YTD budget for one of our dashboards. So, I need to get months 1, 2, and 3 and SUM them. Next month I'll need to get 4 months, etc...
I've looked at SUMIF, but it needs to match against some sort of criteria... I don't have any numeric month labels on the budgets page. I cannot figure out what range/array I would match the month number to.
Now, I know the easy way would be to put a month number at the head of each column, reference that array and do the SUMIF. Blech.
Ideally, I would love to just be able to say =SUM(INDEX(TOT_BUDGET, 1-3)). Is there an Excel function that will let me select an array slice?
------------------------------
In addition, we are getting the Total Sales number out of Great Plains via an SQL query. We summarize many accounts using a pivot table. We then access this table by using the GETPIVOTDATA function.
GETPIVOTDATA("NETCHANGE",TSALES,"FISCALYEAR",CurrYear,"FISCALPERIOD",CurrMo)
Again, how can I do a total YTD?
Is there a way I can do something similar to a foreach loop in the cell formula? I'd like to avoid macroland with this if possible.
View 1 Replies
View Related
Mar 7, 2014
I have a named range "ABC", range is ("A1", "A3", "A5"). Now I need to use Macro to extend the range to ("A1", "A3", "A5", "A7"), that is, adding "A7" to the existing named range "ABC".
View 1 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
Jul 22, 2014
I got a very technical sheet which needs your experience to work.
open the attached file below to see the workbook.
It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"
On "RESULT" Cell (O11) is where the person would put a Reference.
This reference is then checked on the "INPUT" sheet column A.
From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).
But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.
In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.
I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.
I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.
View 1 Replies
View Related
Nov 8, 2006
I have several ComboBoxes & ListBoxes on a Userform that populate by referring to Dynamic Named Range in the RowSource property. Also on the Userform is an area to edit/add/delete items in these named ranges. If I Add or Delete an item, the Named Range does not automatically resize--or at least the Menus don't "resize" accordingly--unless I unload the UserForm and load it back up. Is there a way to refresh these Comboboxes without reloading the UserForm?
View 2 Replies
View Related
