I have 30 worksheets in a workbook in which the first sheet is called summary. The summary sheet has 29 formulas with all named ranges, so one named ranged per worksheet. The issue I have is when i clear old data and add new data every month, the named range changes on some worksheets not pointing to the correct range as previous month file even if I have $
I have a spreadsheet that has 3 columns, date, id and amount for the whole year.
what I need to do is have a macro on another sheet or workbook that has an entry for month. when i enter the month, i need to get all the data for that particular month and then save it with the month name. i am not very sure how i can do this. pivot table does not work as i need to save a file each month.
I have a dynamically named range the contents of which I want to clear. However, I also want to clear the cell contents in the next column beside the range. So if my dynamically named range is A20:B40 can I clear the contents of A20:C40 without changing the initially named range. Background: The data I have is the result of an advanced filter. The range is named for printing purposes without the final column.
If I then change one of the raw data I want to run the filter again. To do this I need to clear the first filter.
Range("AIT_Change_Management").ClearContents
I want to have users fill out. While it is possible to have it Read Only so that they always SaveAs I would rather put in a macro to clear the user input fields. I have done this in Excel 2003 and when I try using the same techniques in 2007 I get an Error 400.
I have all the cells (some are merged cells) in a named range and have the following code for clearing them.
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
I have
colpaste1 =Range("D2:D2")=BA
colpaste3 =Range("D4:D4")=BC
If Cell D2 = BA and D4= BC, i need VB Code to clear all contents in column BA to BC.
Note: BA and BC are the columns.
I found a way to import some data from some csv files, and it works well for me. I don't want to keep the option to refresh the data. I can go into each tab created from each import and and uncheck the box Data>Import External Data>Data Range Properties>"save query definition" that removes it for me. Is there a way to do that with code. It doesn't work with the macro recorder.
Sub ImportOnline()
On Error Resume Next
Dim DayFile As String
DayFile = InputBox("Enter Date of File (MMDDYY)")
Sheets.Add
ActiveSheet.Select
ActiveSheet.Name = "B-" & DayFile
Application.ScreenUpdating = False
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;C:My DocumentsB-" & DayFile & ".txt", _
Destination:=Range("A1"))
.Name = DayFile
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False................
Attached is an example of what I'm looking for. Example: Column A has all the month names with a defined named range of crnt. D6 has a data validation display with a value of Nov 09, I need E6 to display Oct 09 automatically from the data in Column A. Basically I need cell E6 to always display the previous months text based off cell D6. I think the example sheet explains it better.
View 2 Replies View RelatedIs there any way to use a Named Range in the "Source" field in a Data Validation? I have multiple sheets in a workbook that have the same layout, and I am using alot of different Data Validations. My problem is that whenever I need to change, or add a choice to one of these, I have to go to each sheet and change the Data Validations that are effected by that change. Is there a way to use a "Named Range" or something to put all of my acceptable choices, for that Data Validation, in one spot. And make any changes I had to that field.
View 2 Replies View RelatedFiltering data using named range
Code:
Sub FilterNamedRange()
Sheets("Des").Range("A2:E10000").Delete
Sheets("BASE").Range("A1:E10000").AdvancedFilter _
Action:=xlFilterCopy, _
CriteriaRange:=Sheets("cri").Range("Extract"), _
CopyToRange:=Sheets("Des").Range("A1:E1"), _
Unique:=True
End Sub
I have created a macro (data on the left hand side) that allows me to copy data and paste it into an sql file. The problem i am having is that the data varies (e.g. data on the right) so this doesnt actually work. i was thinking of naming the values within the name ranges and then writing code to see if i can copy particular named range values but i dont know if this will work.
View 9 Replies View RelatedI have a cell for which I need the only options for data to be entered from a list in two different tabs from which I understand cant be done but is it possible to have two drop down options for the same cell?
The attached spreadsheet should explain this slightly better...
I have a range of data that is compiled from various cells that I have named as Range1. I then have another named range - Range2 which should be items selected from range1 and copied into range2. This is to enable other work to take place.
I have created an example userform with Range 1 shown but do not know the code to copy it over using a command button. Range 1 should not change. Also vice versa if possible i.e. remove the selected item from Range2 with another button.
I have a named range TOT_BUDGET. We use the current month number to access this range's index for current budgets.
=INDEX(TOT_BUDGET,3)
My quandary is that I need to calculate the YTD budget for one of our dashboards. So, I need to get months 1, 2, and 3 and SUM them. Next month I'll need to get 4 months, etc...
I've looked at SUMIF, but it needs to match against some sort of criteria... I don't have any numeric month labels on the budgets page. I cannot figure out what range/array I would match the month number to.
Now, I know the easy way would be to put a month number at the head of each column, reference that array and do the SUMIF. Blech.
Ideally, I would love to just be able to say =SUM(INDEX(TOT_BUDGET, 1-3)). Is there an Excel function that will let me select an array slice?
------------------------------
In addition, we are getting the Total Sales number out of Great Plains via an SQL query. We summarize many accounts using a pivot table. We then access this table by using the GETPIVOTDATA function.
GETPIVOTDATA("NETCHANGE",TSALES,"FISCALYEAR",CurrYear,"FISCALPERIOD",CurrMo)
Again, how can I do a total YTD?
Is there a way I can do something similar to a foreach loop in the cell formula? I'd like to avoid macroland with this if possible.
I have a named range "ABC", range is ("A1", "A3", "A5"). Now I need to use Macro to extend the range to ("A1", "A3", "A5", "A7"), that is, adding "A7" to the existing named range "ABC".
View 1 Replies View RelatedIf I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
I got a very technical sheet which needs your experience to work.
open the attached file below to see the workbook.
It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"
On "RESULT" Cell (O11) is where the person would put a Reference.
This reference is then checked on the "INPUT" sheet column A.
From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).
But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.
In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.
I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.
I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.
I have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
I have several ComboBoxes & ListBoxes on a Userform that populate by referring to Dynamic Named Range in the RowSource property. Also on the Userform is an area to edit/add/delete items in these named ranges. If I Add or Delete an item, the Named Range does not automatically resize--or at least the Menus don't "resize" accordingly--unless I unload the UserForm and load it back up. Is there a way to refresh these Comboboxes without reloading the UserForm?
View 2 Replies View RelatedI am attempting to use a dynamic named range in a chart data series as described in Excel Hacks (Hack #42 and Hack #52).
Using Insert|Name|Define I have created a named range called CashFlowSaleChartDataRange that is set to the following value:
=OFFSET('Cash Flow-Sale'!$O$10,0,0,NumFlows,1)
When I subsequently assign a reference to this named range in the data series dialog it will accept the answer and my chart will adjust to reflect the updated range. However, if I return to the data series dialog, I now see the range address returned by the OFFSET function rather than the named range reference.
I've read through every thread I can find about dynamic named ranges as source data for a chart. It seems as if everyone can get it to work but me. I have a chart on one sheet that needs to update dynamically from data on another sheet when a button is clicked. Here's my code that runs when I click the button:
Sub Update_Center_Chart()
Sheets("Center Data Chart").Select
ActiveSheet.ChartObjects("Center Data").Activate
ActiveChart.SetSourceData Source = Range("CenterData")
End Sub
I get the error message: "Type mismatch." The data is in B1:F2 on a different sheet. The formula in the named range, "CenterData" is this:=OFFSET('Center Data'!$B$1,0,0,COUNT('Center Data'!$B:$B),4). The data will expand by 1 row every time.
I've set up a Named Range that refers to an array of constants, e.g. MyRange ={1,2,3,4,5}. This appears to be fine since I can output the named range to a range of cells in a row (e.g. A1:E1) and see 1,2,3,4,5 (one value in each column).
I'd like to use MyRange as the source for a Data Validation list in a cell.
Normally data validation list sources must be vertical, so I've set MyRange =TRANSPOSE({1,2,3,4,5}). This appears to be fine since I can output the named range to a range of cells in a column (e.g. A1:A5) and see 1,2,3,4,5 (one value in each row).
When I set MyRange as the source for data validation however, it resolves to an error.
why this setup doesn't work?
Workbook detailing the problem attached. Attachment 273788 NamedRangeDataValidationArrayConstansts.xlsx
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
I have a spread sheet that I pull data from different columns on a particular row. The problem is the code I used works great as long as the column never moves from its current location. Is there a way to use a named range to make the following piece of code work, so no matter how many columns are added or deleted the data is pulled correctly?
View 2 Replies View RelatedI'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
View 1 Replies View RelatedI have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
What i want to do is clear some data within a merged cell but leave the rest.
I have added a sample workbook. The data i want to clear is highlighted in Red so the 11111 will be replaced with ...... and the 09/12/09 will also be replaced with .......
There are over 100 named ranges in my excel 2007 workbook. Is there an easy way to clear all of these out?
View 9 Replies View RelatedI want it to average based on month and year. I have daily data and want to average everything for say January 2000 into one cell and February of 2000 and so on. Column A has date (mm/dd/yy) and column B has data.
View 13 Replies View RelatedI am trying to create a formula that compares month over month data. If the prior month is 0 I get an error. I am having trouble with incorporating ISERR into the formula to eliminate the error.
=IF((C26-B26)/B26