I have a challenge, which i have attached a spreadsheet. It's probably easier if you look at the spreadsheet, rather than me trying to explain. I've added some notes for reference.
I've tried to use an IF/vlookup function but I cant seem to make it work.
Attached File : ans.xlsx
I am trying to use conditional formating that will highlight any cell in the range M2:P9 are greater than 0 AND where M1:P1 (text) does NOT equal Q2:Q9 (text).
View 3 Replies View RelatedI have this :
ColumnRow
1 7
1 27
5 3
5 7
5 31
5 35
5 39
5 59
9 7
9 11
9 31
I need a formula to use with conditional formatting that "lights up" the corresponding cells. So, in this case cells A7, A27, E3... should "light up".
Is this possible, or should I use VB?
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
View 9 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI'm looking to use the percentile formula given a condition. The percentile formula as I understand it is percentile (array,k), where K is the percentile I want.
What I want to do is select a column for the percentile, but only do it for values above zero (I don't want to get into the full explanation as to why but I cannot cheat and just sort the columns).
The context is that I was doing some averageif calculations previously and want to remove outliers (top 5 and bottom 5% of data).
Attached is the file where I want to derive Min Date of seq A and asset Type Char.
SeqAsset TypeStDateEndDate
AChar21-11-200828-11-2008
BEnv22-11-200829-11-2008
CProp30-10-200830-11-2008
AChar03-11-200801-12-2008
AChar04-11-200801-12-2008
AChar05-11-200801-12-2008
AChar06-11-200801-12-2008
AChar07-11-200801-12-2008
I want to find the Minimum Date of Seq "A" and of Asset type "Char". I used following Array Formulas but showing the correct answer 30-10-2008MIN(IF(A2:A9="A",C2:C9="Char"),(D2:D9)) But Istead of 03-11-2008 it's showing 30-10-2008 date of seq C and of asset type Prop
I need to sum several non-contiguous columns if certain other columns meet a certain criterion.
Details:
Need to sum columns Q,R,S,T,U,V,W,X,Y,Z,AC,AD,AI,AJ,AK,AL,AM,AN,AP,AQ,AR,AS,AT,AU,AV,AX,AY,AZ,BA,BC,BD,BE,BF,BH,BI,BK,BL,BM,BN,BQ,BR
in sheet "(1) 65539004 SAP"
IF
column D in sheet "(1) 65539004 SAP" = A2 in sheet "(4) Brand Breakout" AND column L in "(1) 65539004 SAP" = $B$1 in "(4) Brand Breakout"
The formula will be placed in C2 in "(4) Brand Breakout" and copied to other cells just FYI,
How to conditionally format an array formula? The basic formula is an index(match criteria1 and match criteria2. I have come across sites where they mention you can incorporate aggregate into the formula to remove the Alt+Ctrl+Shift thus allowing for the formula to work in conditional formatting. Shown below is the formula I am trying to use. Basically if the formula below = today() then be yellow.
{=IFERROR(INDEX(Table2[Comp Req Date],MATCH(1,([@[SLDR_EF]]=
Table2[Component Material])*([@[Grand Sequence]]=Table2[Order Seq Num]),0)),"")}
I've got a big database dump from SAP. For simplicity, let's say it looks like:
Item# Supplier Model Description ItemCategory
1 A A-1 Something Tool
2 A A-24 Somethinel Tool
3 B R45 Bla Blah Kit
4 C N75 SoandSo Tool
etc. with thousands of entries.
I want to be able to manipulate members of this data set that have "Tool" in the item category alone.
Is there a way to build an array based on a conditional factor of this kind?
I have a 125x125 array of numbers each cell of which is equal to the row header divided by the column header. Using conditional formatting in Excel2007 I can visually identify the integer values. However, for each integer value, I want to list in 3 columns the cell value, the row header value (or reference) and the column header value (or reference).
View 9 Replies View RelatedI have an array that refers to a range of values:
Dim vtimeheader As Variant
vtimeheader = Worksheets("output").Range("e4:xfd4").Value
(1) I now want to delete all values in the array
(2) I want to apply the format "General" to all the cells in the array
I have the following data; B1 and B2 are entered by the user and are named 'heat' and 'race' respectively. Conditional Array Formula Example.xlsx I'm after the ROW number that matches the minimum time (col C) for the heat and race combination shown - in the example below (heat: A, race: 100m), I'd like row '5' returned (or, better still, row '2' of the array A4:D11), as that's the lowest time for Heat A, 100m.
A
B
C
D
[Code].....
but this dosesn't exactly seem elegant, and doesn't work!
ie I simply want the row number (ideally relative to the range) for the lowest time for any given inputs 'Race' and 'Heat'.
This has been kicking my can all morning! Should be simple. I'm trying to conditionally format an array from the value of a single cell.
=IF(A1<80, A3:A24,RED,0)
=IF(A1>80,A3:A24,GREEN,0)
=IF(A1>120,A3:A24,BLUE,0)
In a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?
View 2 Replies View RelatedI seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -
Must admit the R1C1 still confuses me, but somehow I have this working. Currently the RC4 displays in conditional format as $D8 and the RC4 as $C8, but I'm confused at how it knows to start at R8? Is there any way to make the formulas read ="=$D8=""No""" instead?
View 2 Replies View RelatedI have two spreadsheet "book1" with data in it, "book2" that takes all the information from "book1" the cells are linked in "book2" from "book1" so when someone updates "book1" the information is viewable in "book2"
In "book2" where I am getting stuck is as follows,
Column A contains data "break time" that is formatted in HH:MM:SS column B contains a "total duration" in HH:MM:SS. what I need to do is if column A data is = to or more than 4% of column B then I want to turn the cell in column A "red" if it is less then turn it "green". I have tried conditional formatting and it appears to work the once only, I dont no if this is because its 2003 and not 2007??
What I need is to repeat the conditional format over and over again forever is there any code for this I can use?
I have used conditional formatting various ways to format an individual cell. I was wondering does anyone know if it is possible to conditionally format a row? Eaxmple: If D7=Manager, then format A7 through Z7. If so, how would I go about setting that up?
View 3 Replies View RelatedI'm wanting to create a formula in column B that will return a value of 10 if column A is any value between 70% -100%, will return a value of 5 if column A is any value between 50% - 69%, and will return a value of 1 if column A is any value between 1% - 49%. Can you help me?
View 6 Replies View RelatedI want to do an if (I think I do??) command so that if a1=b1, then the cell turns blue and if a1=0, the cell turns red, with the false statement just being blank.
View 3 Replies View RelatedI have data in column B.
And if the below mentioned values are present in column "B" then the cell colour should change to "RED Colour"
Bombay
Mumbai
Bangalore
if any other values other than the above mentioned then the cell format should remain as is.
I have my formulas in place and they are working. The reason why some are coming up with #DIV/0 is because I do not have the data to complete the calculation.
Is there a way to make the #DIV/0 error go away until I imput the data to complete the calculation? I was thinking there might be a way to do it with conditional formatting.
Sub Macro1()
With Range("A1")
.FormatConditions.Delete
.FormatConditions.Add Type:=xlExpression, Formula1:="=A1=B1"
.FormatConditions(1).Interior.ColorIndex = 3
.FormatConditions.Add Type:=xlExpression, Formula1:="=A1B1"
.FormatConditions(2).Interior.ColorIndex = 50
.AutoFill Destination:=Range("A1:A29"), Type:=xlFillDefault
End With
End Sub
If my active cell is NOT A1, the formula entered into conditional formatting is off. The range references get all messed up. For example, if my active cell is Say D5
Condition 1 is
=IT65533=IU65533
Condition 2 is
=IT65533IU65533
But if I run the code with A1 as my active cell, it gets entered correctly as
Condition 1
=A1=B1
Condition 2
=A1B1
I would like to add conditional formatting for the whole row based on whether the value of cells in column A is "CON".
For Each c In r
If c.Value = "CON" Then
c.EntireRow.FormatConditions.Delete
c.EntireRow.FormatConditions.Add Type:=xlExpression, Formula1:=c.Address = "OK"
c.EntireRow.FormatConditions(1).Interior.ColorIndex = 35
end if
next c
the "CON" is a formula and can later take the value "OK".
The conditional formatting should highlight the whole row as green when that happens.
I am not sure if this requires conditional formatting/vba function
If I enter something in cell A1 and leave blank in cell c1, in cell c1 it should print the message "Required Entry, Please Fill up". and this condition should be applied to entire column, where ever in column A there is some values and column c is empty this condition should apply.