Conditional Format Array From Single Cell

Feb 25, 2009

This has been kicking my can all morning! Should be simple. I'm trying to conditionally format an array from the value of a single cell.

=IF(A1<80, A3:A24,RED,0)
=IF(A1>80,A3:A24,GREEN,0)
=IF(A1>120,A3:A24,BLUE,0)

View 2 Replies


ADVERTISEMENT

Conditional Format X Number Of Cells Based On A Single Cell?

May 4, 2014

I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.

For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.

View 3 Replies View Related

Single Conditional Array Formula To Sum Occurrences In Range Of Cells

Mar 28, 2014

I'm trying to find a single conditional formula which summarizes multiple text occurrences in a range of cells. I managed to summarize the occurrences in a single cell, but my challenge is that I'm looking for a single (array?) formula for this.

I have a worksheet with column A which contains the condition and column B which contains a text field. I'm looking for a single formula to summarize all the 'AB' occurrences in the cells B4..B11 where the column A is Apple. I managed to do this by using an additional column (column C), however as my worksheet contains over 10000 rows, I would like to use a single conditional (array?) formula summarize the AB occurrences (multiple ' AB's can occur in a single cell) in stead of having to use an additional field per row.

I have attached a sheet as an example. I'm looking for a single array formula in cell C11 which summarizes the 'AB' occurrences in cells B4..B11 where column A is Apple.

View 3 Replies View Related

Conditional Format Array Formula

Jun 19, 2014

How to conditionally format an array formula? The basic formula is an index(match criteria1 and match criteria2. I have come across sites where they mention you can incorporate aggregate into the formula to remove the Alt+Ctrl+Shift thus allowing for the formula to work in conditional formatting. Shown below is the formula I am trying to use. Basically if the formula below = today() then be yellow.

{=IFERROR(INDEX(Table2[Comp Req Date],MATCH(1,([@[SLDR_EF]]=
Table2[Component Material])*([@[Grand Sequence]]=Table2[Order Seq Num]),0)),"")}

View 2 Replies View Related

Get A Single Cell To Look At An Array

Mar 10, 2009

What Iím trying to do is get a single cell to look at an array, if there is a number in that array which is between 2 limits to return that number. This is eventually going to work with limits of dates/times, and have to be updated once a day. Iíve attached a workbook with an example of the data and the way I want it formatted. {=IF(AND(A1:A25>=D32,A1:A25<E32),A1:A25,"")}

But this always returns a false. I can get it to work without using array and just having cell to cell logic but this means I would need the same amount of columns in the formatted data as the raw which is impractical.

View 5 Replies View Related

Single Cell Array Or Sumproduct Formula

Jun 16, 2009

To calculate the result for a month is easy, but I can't figure how to get a single cell formula to calculate for the year. The sample attached explains it better.

View 4 Replies View Related

Creating Array Of Number From A Single Cell Value

Jan 17, 2014

I had some number combinations as this 5-23-34-233, 50-233-34-45, 34-5-23-45-67. The length can be variable in column A.

I want a formula which should return array of numbers of each cell in column A. So if A1 has 5-23-34-233 so the formula should return array like {5,23,34,233} and like wise.

View 8 Replies View Related

Conditional Formatting Based On Another Cell Conditional Format

Mar 20, 2013

Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:

If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.

Possible???

View 3 Replies View Related

How To Return Multiple Values From Array In Single Cell

Jul 2, 2014

I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.

I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:

To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).

I already have it working for returning a single value with the following formula but need it to return multiple values.

=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")

View 1 Replies View Related

How To Return Multiple Values From Array In Single Cell

Jul 2, 2014

I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.

I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:

To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).

I already have it working for returning a single value with the following formula but need it to return multiple values.

=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")

View 1 Replies View Related

Format From Column To Single Cell

Feb 17, 2014

I have a column of numbers that I need to reformat. I created a macro to copy/paste special/transpose to get the data into separate columns. I then used & to get them into one cell. I can only have five sets of # in each cell. The macro works but it replaces the previous set of accounts. Is this the best way to reformat these numbers? If so, how do I correct the macro so that it doesn't replace the data i already reformatted?

I have attached a sample spreadsheet.

View 3 Replies View Related

Format Row Based On Single Cell Value In That Row

Jan 21, 2008

I have a macro that's supposed to see if cell 5 meets criteria and continue to all sheets in workbook, except " Total".

When I activate the macro on a specific page, it runs smoothly on that page. But when it's finished, it doesn't continue to the next sheet in the workbook.

Sub ColourBG()
Dim ws As Worksheet
Dim line As Integer
endline = Range("A1000").End(xlUp).Row

For Each ws In Worksheets
If ws.Name <> "Total" Then
With ws
For line = 3 To endline
Application. ScreenUpdating = False
If (Cells(line, 5).Value = "0206") Then _
Cells(line, 1).EntireRow.Font.ColorIndex = 5 '*(Blue)
Next line
Application.ScreenUpdating = True
End With
End If
Next ws
End Sub

View 9 Replies View Related

Format Multiple Cell Values Displayed In Single Cell?

May 24, 2012

I have the following data on a spreadsheet created by a formula:

A1: 1.1234
A2. 2.234
A3: 3.34

I have the data formatted to only have two decimal places so it looks like this:

A1: 1.12
A2: 2.23
A3: 3.34

I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:

=A1 & "," & A2 & "," & A3

However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34

Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34

View 3 Replies View Related

Conditional Formatting Not Working For Single Cell?

Jan 6, 2013

I have a spreadsheet which uses conditional formatting to highlight cells with certain values. It's works perfectly, except for a single cell. The formatting formula is and should be exactly the same as other cells in the sheet. For whatever reason, this cell will not change with the formatting rules. The cell is not protected, it doesn't have any oddball values or anything that I can see.

View 3 Replies View Related

Conditional Boundaries For Whole Row Based On A Single Cell's Value

Apr 17, 2007

Need to write a code that gives a whole (from column B to column S) row a bold upper-boundary if that row has a value in column B?

View 2 Replies View Related

Conditional Formatting For Range Of Values In Single Cell?

Mar 1, 2014

I have a series of columns (L - X) each representing a diagnosed disorder (Dx), coded as binary, with 1=Positive Diagnosis (Success). The reference cell contains diagnostic codes; for each respective Dx column I need a 1 or 0, obviously. Each Dx category has a range of values (Dx codes), so I need to write syntax that reflects this range. For example, =IF(A1=>141,AND(A1=<239.99)),"1","0")

In other words, if cell value is 141 through 239.99 then return 1, else 0

Would it be something like this:
=IF(AND(A1=>141,OR(A1=<239.99)),"1","0")

View 1 Replies View Related

Multiple Row, Single Column Cell Blocks Into Single Row, Multiple Column Format

Mar 21, 2008

I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...

View 9 Replies View Related

Treating String As Array And Correct Array Format For Unicode Characters?

Jul 30, 2012

in C a string is nothing more than an Array of characters ending with a null character.

in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:

When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?

Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.

Now I can use

byteArray() = StrConv(unicodetext,vbFromUnicode)

to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?

Using an integer array does not work other than through

intArray(j) = CInt(AscW(Mid(Outp, j, 1)))

which fails on the nullstring in my encrypted text.

I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.

View 1 Replies View Related

Conditional Format On Part Of A Cell

Apr 2, 2009

I've used Conditional format before and up to now never had a problem with it. I would like that if a cell ends with a number it turns (eg) yellow. So Hallo1 remains colourless, but in the case of Hallo2 the cell turns yellow. I have tried (in the active cell A20) Right(a20,1)>1 (with the setting hasFormula) and =Right(a20,1)>1, both without the desired result.

View 2 Replies View Related

Conditional Format Using LEN If Cell Is &gt;3, But &lt;10 Characters.

Nov 7, 2009

I'm working on a report right now that I would like to identify incorrect phone numbers. So I'm looking to use the LEN function to identify and highlight any phone number that is incomplete (like missing area code). But I also don't want it to highlight if there is an "N/A" in the cell.

So I was using =LEN(A1:A100)<10 since 10 digits would be a complete phone number). But I don't know how to manipulate it to be if the cell is greater than 3, but less than 10.

View 2 Replies View Related

Only Apply Conditional Format If Cell Val > 0

May 10, 2013

I have a column in a sheet referencing data from a column in another sheet in my workbook. I want to apply conditional formatting on these numeric values, from red for lowest vals to green for highest. However the fact that my column is referencing cells that will not yet have data means that they are being pulled over as 0. I am not displaying zero values in cells but the zero vals are still being included in the conditional format. Is there any way to discount these zero vals?

View 2 Replies View Related

Conditional Format IF Cell Is One Of Three Values

Oct 28, 2008

Cell D8 contains many different account codes. When entering into this sheet, if D8 is filled using account code 4010.12, 4010.17, or 1190.1000, then I want Cell J8 to turn a different color, flagging that cell so they know they have to fill that cell in J8, otherwise that cell will remain blank.

View 2 Replies View Related

Conditional Format If Cell Contains One Of 2 Words

Mar 11, 2009

I am trying to conditionally format columns B:I so that when either "Closed" "Complete" are entered in G they all go grey

Also I want the cell in column I to go red when the date in there is equal to today or has gone past

I have got it to work using:

View 2 Replies View Related

Conditional Format Based On Cell Value - VBA

Jan 17, 2014

With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.

The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.

Specifically, the formulas I'm using in the Conditional format wizard are:

Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D

Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.

View 2 Replies View Related

Conditional Format Row Based On Cell Value - VBA

Jul 23, 2014

How to write a VBA that will, if the value of a cell in column "U" is TRUE, that row's FONT (for the row the TRUE cell is in) will turn red.

View 4 Replies View Related

Copy Conditional Format From One Cell To Whole Row

Jul 25, 2002

I wonder how to copy a conditional format from one cell to its current row.

I've attached an example (if B3 is green then I'd like its whole row turns green too).

I think there should be an "easy" way to turn the whole rows green, red or whatever color based on the B column formats (or colors)..........

View 9 Replies View Related

Conditional Format Cell Based On Value Of Another

Feb 19, 2007

I'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following

Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))

If rng Is Nothing Then
Exit Sub
Else.....................

This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another

View 2 Replies View Related

Conditional Format: Highlight A Cell If Any Cell In The Range To The Right Was Greater Than Zero

Mar 28, 2007

If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.

View 4 Replies View Related

Conditional Format - Highlight Cell Based On The Value Of Another?

Jul 24, 2013

Looking to use conditional formatting to highlight a cell based on the value of another.

I.E. Highlight Cell B2 if Cell A3 is 4 or greater.

View 2 Replies View Related

Conditional Formatting Based Upon Format Of Another Cell?

Mar 25, 2010

Is it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved