I'm calculating sick days on an Attendance Report.
- Sick days accumulate at a rate of 1.25 per month.
- Employees will carry-forward unused sick days from 2008.
- The maximum sick days is 30.
In trying to create a formula that will multiple the current month (eg Dec=12) by 1.25, subtract any sick days taken YTD (S16), and add the carry-forward days from 2008 (W16), I noticed one problem with the following formula:
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies View RelatedI have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedI am a memeber of this forum for more than a year, and currently assign into a new assignment which dealing an excel file everyday. We have one excel file for moniroting of action items generated by the management after the study. As since there were around 2,500+ rows has been generated since in the beginning of 1990's till todate. So I was thinking of instead of getting the result through filter manually, I want to create a formula that will count of how many has been closed this month out of the total numbers of action items.
Is it possible to use the COUNTIF formula to count the number of items in Col C, where Col B contains a date?
2-Jan-13 Closed
2-Jan-13 Closed
5-Jan-13 Closed
19-Feb-13 Closed
16-Feb-13 Closed
22-Feb-13 Closed
2-Mar-14 Closed
5-Mar-14 Closed
8-Mar-14 Closed
10-Mar-14 Closed
15-Mar-14 Closed
finding a code that would automatically insert various phrases into a column depending on whether or not the person in that row was due to renew their membership in our organization. The code I received works fantastically, but I've come across one snafu:
View 3 Replies View RelatedWhat I am trying to to is calculate the number of Years, Months, Weeks, and Days from one date to another. So far I can calculate years and months accuretly but I'm having trouble with the days and can't seem to figure out how to do the weeks.
I'm using the formula: =DATEDIF(B1,B2,"y")&" Year(s), "&MOD(DATEDIF(B1,B2,"m"),12)&" Month(s), and "&(MOD(DATEDIF(B1,B2,"d"),365))&" day(s)"
B1 is the current days date
B2 is the entered date
What I am getting when I enter the date 9/14/09 with the current date (8/3/06) is 3 years, 1 month and 43 days. when it shoud only be 3 years 1 month and 11 days. Any date I enter the days are not right. I can't seem to figure out what I am doing wrong. Also I'd like to get the weeks to come up also. Such as Start date 8/3/06 Entered date 10/19/09. What I want to see: 3 year(s), 2 month(s), 2 week(s), 2 day(s).
I am trying to get mmm-yy date format for the next 2 consecutive months from now. I used the following code for that reason, but I am not getting.
strDate = Format(DateAdd("m", 1, Date), "mmm-yy")
strDate = Format(DateAdd("m", 2, Date), "mmm-yy")
However if I use this, I get the current months date correctly (like May - 08)
strDate = Format(DateAdd("m", 0, Date), "mmm-yy")
I use this formula to count number of entries month wise.
Following example is for Month of Feb.
How can I convert this to count entries for current year ( of course month wise).
I've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
I have a workbook with two spreadsheets in it. On the second sheet there is a large table, which column headings are months and years (e.g. Jun-07 Jul-07, Aug-07, Sep-07....). I was trying to write an excel vba code that would search the first row (column headings) to find the current month and year, and copy the corresponding column along with two previous columns (months) to the first sheet. I would like to have a code that will be able to do this in Jan-08, Feb-08, or Jan-09 as well.
View 2 Replies View RelatedIn sub which will convert file to PDF and save it to assigned folder and then attach it to email in outlook. All works fine.
However is is possible to modify the code to save fole to respective month folder ( as per current date and year)?
e.g. I have created folder Named 'Trial' in C drive . This has sub folders 2014, 2015, 2016, 2017, 2018 Each year folder will have sub-sub folders month wise like This has sub folders as Jan , Feb , Mar , Apr .... till Dec Now e.g. if date when the pdf was created is 23/4/14 then it is saved in C:Trials2014Apr automatically. Currently every year I keep creating new folders etc... bit primitive though.
I have this code
Lastmonth = Format(Date, "mm-yyyy")
I would like to get it to returen the previous month. for example this month is 01-2010. I would like it to return 12-2009
Basically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
Looking for a formula to compare current year values to previous year values. For example, if the current year has values for the month of January through March (100, 100 and 150), current year value will be 350 and the previous year value will be 975 (i.e. 300+275+400). The aim here is to make the previous year months summation equal to the present (or current) values. As new values are entered for the current year, the previous year's values will have to change to reflect the new month's value entered for the current year.
Month 2012 2013
Jan 300 100
Feb 275 100
Mar 400 150
April 650
May 454
June 800
July 500
Aug 375
Sep 525
Oct. 300
Nov 410
Dec 510
Sample file is attached : Comparison_Years.2011.xls‎
I am trying to do an IF statement, if the activecell's value is equal to this current year, do nothing and if its not the current year, to offset one column to the right and insert a blank column, then copy the whole column to the left and replace it with the new blank column.
View 1 Replies View RelatedDATE function won't return TODAY()'s year in the "year" slot.
Is there a way convert, for example, 2/8/1963 to 2/8/2009 without using Concatenate?
I'm after a formula this time ... i've searched the board and can't find what i need.
a cell shows 2009 December
and i'd like a formula to covert this to 31st December 2009 .... i.e. for any cell i'd like to know last day of month... and month and year ..
I have the following data:
column a: column B:
1
7
9
25
I need a formula to make column B equal to the current month adding the day in column A. so that column B equal the following:
column a: column B:
1 09/1/2009
7 09/7/2009
9 09/9/2009
25 09/25/2009
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
Attached File : Time and Attendance.xlsx‎
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
View 4 Replies View RelatedIn a sheet I enter the following:
... in A1 a year (say 2012)
... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies View RelatedI have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
I have a spreadsheet for monthly supplies. In row 1 is Jan – Dec and in the row 2 below are empty cells where there will be a total for that month’s purchases. I want a conditional format formula to automatically bold and highlight the current month’s total and month name.
Also, when I enter February totals next month and that number is input into February’s total, I want that month and total to bold and highlight BUT I also want the previous month’s bold and highlight to vanish at the same time. Is this possible?
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
Serial No Search E220060926320061125420060612520070824620061026720061226820061127920061226 Excel tables to the web >> Excel Jeanie HTML 4
E - Year Month Date
I need F column as Month Date Year Format