What I am trying to to is calculate the number of Years, Months, Weeks, and Days from one date to another. So far I can calculate years and months accuretly but I'm having trouble with the days and can't seem to figure out how to do the weeks.
I'm using the formula: =DATEDIF(B1,B2,"y")&" Year(s), "&MOD(DATEDIF(B1,B2,"m"),12)&" Month(s), and "&(MOD(DATEDIF(B1,B2,"d"),365))&" day(s)"
B1 is the current days date
B2 is the entered date
What I am getting when I enter the date 9/14/09 with the current date (8/3/06) is 3 years, 1 month and 43 days. when it shoud only be 3 years 1 month and 11 days. Any date I enter the days are not right. I can't seem to figure out what I am doing wrong. Also I'd like to get the weeks to come up also. Such as Start date 8/3/06 Entered date 10/19/09. What I want to see: 3 year(s), 2 month(s), 2 week(s), 2 day(s).
This formula will return will return the date of Nth day-of-week for a given month and year. For example, it will return 26-March-98 for the 4th Thursday of March, 1998. Days-of-week range from 1 to 7, with Sunday = 1 and Saturday = 7.
I currently am trying to refine some spreadsheets at work (hospital setting). The type of files im working with are medication sheets where on the left it states the medication and to the right of it, the cells have the days of the month(1-31) but I need them to change depending on the day they come into our facility. Above the numbers i would also like it to say the day of week with the first initial (M, T, W, T, F, S, S) in the cells are the top. It is something that we have to make for each day it it gets really annoying and is a waste of time moving the dates over for every day. find a way where I can open the file and the numbers and letters are all in the right place without having to change it for the day that the patients are coming in.
I have using the following Formula: =COUNTA(A3:A7,A10:A14,A17:A21,A24:A28,A31:A35) Basically is counts how many week days there are in a particular month. Now I have a cell (B47) that counts how many Bank Holidays are in that month. I am having trouble using the formula then minus B47. I must be missing something really simple.
I'm calculating sick days on an Attendance Report. - Sick days accumulate at a rate of 1.25 per month. - Employees will carry-forward unused sick days from 2008. - The maximum sick days is 30.
In trying to create a formula that will multiple the current month (eg Dec=12) by 1.25, subtract any sick days taken YTD (S16), and add the carry-forward days from 2008 (W16), I noticed one problem with the following formula:
In one column I'll have a list incrementing in 1w,2w,3w,1month and I want to be able to count the number of days that have elapsed till the latest cell. Right now I'm just winging it by saying there's always 31 days in one month using a COUNTA function, but I need it to be accurate.
Is it possible to format cells to convert a date format of month/day/year to = year/week #/day of week? For example, 04/05/07 (April 5, 2007) would read as 7145, (7=last digit of year/ 14 = week number / 5 = day of week....Sunday being the first day of week)
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
I would like to create a monthly inventory, based on workdays (Monday - Friday)Myrna Larson has a formula that I would like to use with the workday function, but I don't know how to combine them.
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
I can retrieve the weeknum of any particular date using =WEEKNUM(x) or =TRUNC(((x-DATE(YEAR(x),1,0))+6)/7)
But I'm looking for a UDF to output the tax year week number where the tax year always starts on 6th April. The std weeknum for 6th of april pretty much varies around week 13 but as it varies I don't ever get a strictly true result by deducting 13 from WEEKNUM().
I've done a search on here to find out how to convert a date to a week number & found this: - =WEEKNUM(A1) which works fine, But I also want the result to display the year.
