I've done the following:
Sub BrownBH()
If Range("Brown!B4:B31") = X Then
Range("C4").Value = [#A]
Else
Range("C4").Value = NT
End If
End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
For the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I would like to change a combo box back to a specific value, based on a change in C4.
So no matter what happens, if c4 changes at all, the value in the combo box gets reset....
Does anyone know the VBA line for finding a specific letter in a cell?
eg.
Say cell A1="B"
Say cell C3 contains a word, and I want to know if that word contains the letter shown in in cell A1 (ie. contains the letter B).
I am working on excel based tool where I need a small piece of macro. I used two IF loops in the code.
The second IF loop is working fine. The problem is with first IF statement.
What I need to do is -
If E6 is Yes, then in the same worksheet named "Input Sheet", i need to change values of cells D14:M14 to zero and also
I want to restrict people to change this value. So, after changing the value to zero, I am hiding that row.
But if E6 is "No", then -
Unhide the Row 14 and allow users of this tool to change value of cells.
I believe the only issue is with statement - Sheets("Input Sheet").Range("D14:M14").Value = 0
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If [$E$6] = "Yes" Then
Sheets("Input Sheet").Range("D14:M14").Value = 0
Sheets("Input Sheet").Rows("14").Hidden = True
[Code] ..........
ColA contains Purchase Order (PO) numbers and I want to return the department number or project number (which is contained within the PO) in ColB eg.
A B
PO # Department/Project #
AP001234P1234 Want to return everything before the 'P'
PR004444P4444 Same as above
TR2008-1234 No need to change
6501P1234 Want to return everything before the 'P'
I was using IF function but there are too many variables then I thought about the 'P' but not sure how to go about it?
I have a range B2:ZZ2000
Some of the cells contain a variety of dates (formatted as d-mmm) Other cells contain either "i", "n" or are blank - or contain a text string, eg "his name"
I'm looking macro code that will: Look at the range and only for any cell containing a date, replace it with "y".
Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.
View 2 Replies View RelatedIs there a way to get Excel to automatically change the first letter of single word entry to lowercase in each cell of the first row of my worksheet leaving the case the same for all other letters?
View 5 Replies View RelatedI'm trying to write an IF formula that will return a number if the word in the adjacent cell begins with a specific letter. Here's what I want to show:
City
01
Express
02
Overnight
03
So "C" would return 01, "E" would return 02 and "O" would return 03.
i want to fill down a column and instead of my formula changing from A6 to A7 i want it to change to B6.
View 9 Replies View RelatedI am working on a spreadsheet for work, and have managed to do everything I need to so far but I need to colour specific letter strings, certain colours within a range of cells (each letter string will only appear once on each sheet)
The strings I will be looking for vary depending on data entered so I will need to cell reference them
The strings that need colouring are in cells with other strings that must stay black (They cannot be separated from other strings due to the nature of the grid)
I need some strings red, some green, and some blue.
These changes should also apply to the whole workbook not just one sheet.
Is there a way to do this with the VBA code.
I would like to have excel automatically fill an excel cell with a predefined list. For example, if you put the letter l it will automatically include the word large. This is like you do when you fill out a form online. See attachment
View 2 Replies View RelatedIts really hard to explain. See the attached.. Basically I have kind of a database of Letters and each letter has several codes associated with it, although each letter is different (a few are the same but that's irrelevant), e.g. letter E means you need to use codes 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.9, and 3.10. That information is stored elsewhere. I simply want a user to be able to put that letter into this box and next to it these codes will populate.
View 4 Replies View Relatedhow to allow both these codes to work on say sheet 1. I can get one to work just fine. So, any tips on how to get them both to work on the same sheet would be great.
Private Sub Worksheet_Activate()
End Sub
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
With Worksheets("Sheet1")
If Not Application.Intersect(Target, .Range("n1:n200")) Is Nothing Then
If Target = "S" Or Target = "s" Then Target = "Submitted"
If Target = "A" Or Target = "a" Then Target = "Approved"
If Target = "I" Or Target = "i" Then Target = "Investgating"
Else
End If
End With
End Sub
and this,.............
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
In sheet1 I have a simple database consisting of 5 columns of data
Column A : Name ie James Jones
Column B : payroll number ie 123456
Column C : shift times ie 1245-2124
Column D : job title ie floor
Column E : comments ie A/L or 0600-1500
what I would like is some code that will go down Column E and if a 'time string' ie 1300-2130 is found then copy this string and paste into corresponding value in column C. If a text string is found ie A/L or Sick or anything like this then ignore and move onto next cell, loop this until all cells in column E have been checked.
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
Best way to change the value of a cell if another cell has a specific value
i.e.I want to change cell F11 to No if F12 = Yes and also the other way around F12 to No if F11 = Yes, so only 1 of these cells can say Yes, but they both can say No.
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedI have a spreadsheet which has a version number in it on a given cell. This cell is protected as is the spreadsheet.
I want to create a macro that will target the given cell and ask user to input new value and then change the cell value.
This macro will be attached to a button.
I already know how to disable and enable spreadsheet protection but have got no clue as to go about the rest.
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
But Excel does not like the formula at all.
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedI need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedMy goal from image is to enter a number for example in cell F4 and have in appear in L6 so simply L6=F4 but I want it to be negative if cell M2 reads "Outgo" and positive if cell M2 reads "Intake" as selected from the list. Is this possible?
View 5 Replies View RelatedI am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
