Excel 2013 :: Change Text In Cell Based On Date In Another Cell
Apr 14, 2014
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
I have a spreadsheet with a database query attached (refreshing every 60 seconds) showing a stock summary by product.
I need the spreadsheet to play a .WAV file when values change. i.e.;
If cell A1 <6, play sound1.wav If cell A2 <6, play sound1.wav If cell A3 <6, play sound2.wav If cell A4 <6, play sound2.wav
This may need to be repeated several times based on certain criteria. I have a total of about 30 cells which I need to be looked at individually (not a sum of) and to play the relevant sound.
I have seen different people try to tackle this in different ways. The ideal way would be creating alarms in VBA and triggering them using a formula, but I cannot get these to work in Excel 2010 or 2013.
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due. Column C is when bi-weekly inspection is due. Column D is when monthly inspection is due. Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
I have 2 tabs in a 2013 workbook. Inventory Receipts and lookups. One of the Data verification lookups I have is a drop down list in each cell in Column B (eg: Cat, Dog, Mouse) In the lookups tab I have another cell range containing the sounds (eg: Meow, Bark, Squeak).
What I am trying to acheive is, if B2 contains Cat, then return Meow in B3, if B2 contains Dog then return bark in b3 and if B2 contains Mouse return squeak in B3. Ideally I would like the formula to return the text from my lookup sheet (eg: 'Lookups'!C2,'Lookups'!C3,'Lookups'!C4). So depending on which option they choose from my animal drop down list .. the correct noise would automatically fill in.
In Excel 2013, there is a transition in the cell when values change. I have a DDE feed updating data every few seconds and the folding animation is distracting. Is there a way to turn this off?
I am trying to put together a report tracking sheet, ie I have different test that take a different length of time to return to the office and I want to be able to see when a test should be back from the lab,ie:
A blood sample takes 1 day, a urine sample takes 3 days.
I need a formula that basically says that if the data in cell A1 = Blood, (and I have the test date in cell A2) then the data in cell A3 should says A1=Blood, A3=A2+1 to give me the test due date
I found the following formula in one of the other posts;
=IF(E5="BLOOD",G5+1,IF(E5="URINE",G5+3,0))
The problem that this will only work with two tests and I have more than two tests, I have fourteen and each takes a different length of time to process.
what I need to do to update a folder full of files. There are 120+ .xls files in one folder, the merged cell A30-V38 needs to change its current text to "4th Quarterly Printer Preventative Maintenance".
I have zero prior knowledge of visual basic, and have Excel 2013.
I am trying to concatenate entries into one cell so that when uploaded, the comma-separated contents will be treated as tags. copperberry sample file.xlsxSee attached sample file. Wherever there is a 1 in a row, I want to take the column header text above that 1 and concatenate it with subsequent text in the cell at the end of the row. See sample end result in cell J2. I assume I need an IF statement, but I'm not sure how to phrase it to collect all the concatenations needed. There are 200+ rows.
I have the following data set with about 500 rows. It has one large value in column A, followed by a number between 1 and 24 in column B.
I am trying in Excel 2013 to develop a formula that will: divide A by the value in cell BPlace in cell C, D, E, F... the result of this division, where the number of times the value is repeated depends on the value in B. E.g.
Example of source values/data set: A B
18504 18
2011 2
23694 24
(about 500 rows more)
An example of the output result that I am looking for: A B C D E
2011 2 1,005.5 1,005.5
In above example, the value in column B is 2, so the result of the division of value A with value B is repeated twice. In case value B would be 18, the value would be repeated 18 times...
I have been trying to do this in Excel for more than 2 hours, but I did not manage to complete it.
I have data in E6-E67 on Sheet 1. Based on the date in A2 on that sheet, I need to paste to a column in Sheet 2. In excel, I am able to get the cell location through vlookup and get the correct column number/cell reference. When it gets to the paste location, I am stumped on how to format that line of code? Do I need sometime of variable? I tried to use the address/lookup code but it does not work.
Sub Test() For Each Cell In Sheets(1).Range("J:J") If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried " PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
I am working with DatePicker calendar. I have two userform with date entries. In one userform I will have 2 textbox to enter dates. In the other one I will have 4 dates to enter. I used to have Excel 2007 with Calendar Control and used to work fine but had to make multiple calendar to control individual Textbox in multiple Userforms.
I am looking for a way to, If a userform is selected to trigger only the textbox name that is within that userform. If I add more entries the code adds automatically the date from the previous userform in the next one.
[Code].....
I was thinking that this would work but it still adds the date to my frmdashboard userform if I am in my frmdata userform.
Is there a way to trigger only the userform that I am currently in?
Using Excel 2013.
Note: I also have a "Clear All" VB Code that will delete every entry in my userform on Initiate but I am looking to not go this path.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3 Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
my worksheet have a a lot of date cell (dd-mm-yyyy), if I changed the format to yyyydd. it will display "200612". However, the cell format still showing orginal date. Can you change it to text format (200612) in the cell when I type 200612?
In an excell worksheet I need to change the color of a cell within a column based on the date entered. For example, if the date in the cell is 60 days from today's date then the cell should be green, if the date in the cell is 90 days from today's then the cell should be blue, if the date in the cell is 120 days from today's date then the cell should be yello.
I need to include a prefix of +91 and +911 based on a text in column A. If any cell in column A has a specific text and when I enter a number in corresponding cell in column B it should add a prefix number as below.
If any cell in col A has text "STATE LINE OR MOBILE 1" then the corresponding cell in col B should add a prefix of +91 to whatever number I enter in that cell of col B.
If any cell in col A has text "MOBILE 2" then the corresponding cell in col B should add a prefix of +911 to whatever number I enter in that cell of col B.
If any cell in col A has any other text then the corresponding cell in col B should be the same number as I enter in that cell of col B.
I have a spreadsheet that I enter monthly expenditure on.
Column A is expenditure during 24th to 31st Column D is expenditure during 1st to 8th Column G is expenditure during 9th to 16th and Column J is expenditure during 17th to 23rd
Ive been trying to colour the columns grey if todays date is outside the above date ranges each time I open the spreadsheet so its obvious which column my expenditure needs to be entered into.
I'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).
Start Date End date 02-Jul-12 09-Jul-12
[Code]......
When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.
I need to change the colour of a cell using VBA based on the input of a certain word. I have used teh below code but it doesn't pick up different variations of the word
Dim cell As Range For Each cell In Range("E2:E500") If cell.Value = "Check" Then[code]....
This code works fine (i have put it into worksheet change) when I use "Check and Mark and Chase" but some users are bound not to use capitalised first letters and on these occasions the cell colours are not changing.
How to add something to thie code above to make it work for any variation of capitalisation?
Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.
