I would like to change a combo box back to a specific value, based on a change in C4.
So no matter what happens, if c4 changes at all, the value in the combo box gets reset....
I am trying to use a userform ( Combo Box) to update my named cell "Aircraft1" then based on the value selected change the color of an object.
The code works great if I manually enter the value in the cell "Aircraft1", however if the dropdown list selects the value the object does not update its color.
Is there a way to update the cell via a combo box, and then have the VB code change the color of the object?
This is my
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("Aircraft1")) Is Nothing Then Exit Sub
ActiveSheet.Shapes("Arrow1").Select
With Range("Aircraft1")
If .Value = 1 Then
ActiveSheet.Shapes("Arrow1").Select
Selection.ShapeRange.Fill.Visible = msoTrue
Selection.ShapeRange.Fill.Solid
Selection.ShapeRange.Fill.ForeColor.SchemeColor = 17
I've done the following:
Sub BrownBH()
If Range("Brown!B4:B31") = X Then
Range("C4").Value = [#A]
Else
Range("C4").Value = NT
End If
End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
I am trying to use vba to give a combo box focus only when cell D2 (a cell merge of d2,d3 and d4) changes.
So, If I enter a number in cell D2 and hit ENTER or use one of the arrows I want the combo box to get selected (get focus). I don't want this action to take place when other cells are acted upon this way. ONLY D2.
Ive got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 Replies View RelatedI would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
I have 2 combo boxes which appear to have called themselves Drop Down 12 and Drop Down 28. I would like to put a macro on 12 that when a user clicks it DD28 automatically goes blank.
View 2 Replies View RelatedI have a spreadsheet which has a version number in it on a given cell. This cell is protected as is the spreadsheet.
I want to create a macro that will target the given cell and ask user to input new value and then change the cell value.
This macro will be attached to a button.
I already know how to disable and enable spreadsheet protection but have got no clue as to go about the rest.
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
i am trying to use a combo box to change the properties of a text box. i think i can do this by having it look at the cell link that i sent and then changing the text box appropriately with something like this:
View 3 Replies View RelatedI've created a combo box in excel with the macro recorder. This is the code that came back:
Sub test1()
ActiveSheet.DropDowns.Add(1305, 52.5, 242.25, 39).Select
With Selection
.ListFillRange = "$AW$4:$AW$18"
.LinkedCell = "$AX$5"
.DropDownLines = 5
.Display3DShading = False
End With
End Sub
This always results in a default font size of 8 for my list. Can anyone tell me how to modify the code above to change the font size to 14? And how to modify the color of the list.
I need in some way to make the range variable, because it can change. I need only the first range to be different.
Code:
x = .Range("a4:a27").CurrentRegion.Value
A4 have to be instead the cell where Denmark typed. Column A
And
A27 have to be the lasted used cell in column B
But after the row where it have found Denmark.
Please have a look.
Below code is from AB33, But this is not a cross post.
Different question
Code:
Sub copyp()
' Denmark
Application.ScreenUpdating = 0
Dim cell As Range, i&, dic
With Worksheets("Middle Result")
x = .Range("a4:a27").CurrentRegion.Value
[Code] .......
I have a combo box named Combobox5 and a text box named Textbox7.
Should this code go in the Userform Initliaze or where? I have tried placing it in both the ComboBox5 Change evnent and no luck so far.
Range("G22:J28").Value = TextBox7.Text
Again this code is dependant upon the user making a choice from ComboBox 5.
I have also tried:
Range("G22:J28").Value = TextBox7.Value
I am using Excel 2003. Any ideas??
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
My boss wants a spreadsheet that has multiple buttons on it that will change the background color of a specific cell to four different colors. Example:
Text written in Cell B3, Button in Cell A3 that will change the Background color of Cell B3 to either Green, Yellow, Red or Blue.
There will be a lot of buttons on this worksheet following the same format as above. I don't want to change the value of what is in the cell, just the background color.
I'm trying to have a macro run to search a specific column (S) for a particular text value "y" and if true it will change the font to bold and the color to red for the entire row of the cell that contains the "y". the column is part of a data table that is constantly refreshed not sure if that makes a difference or not.
View 2 Replies View RelatedI have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
View 2 Replies View RelatedI need to conduct keyword searches in excel and color the keywords a different color without changing the font color of the entire cell. now, i found some code from another thread that does this, but i cant seem to get it to work with more than 2 keywords. i need fine-tuning the provided code to do what i need it to do.
[URL]
the VBA code i used was this:
[Code].....
I was playing around with the example, the Cat_Mouse.xlsm, and when i modified the 'myList' and 'myColor' arrays, it does not work.
Cat_Mouse.xlsm
For example, I modified the code to add the word bat:
[Code] .....
When i run the macros, the word "Bat" does not become colored red. interestingly enough, when i substitute the word "bat" for the word "hat" in the "myLIST array, the word "hat" does change to the red font.
I am looking to use this code to address keywords in my excel file by coloring all key words red and i have more than 10 key words.
Best way to change the value of a cell if another cell has a specific value
i.e.I want to change cell F11 to No if F12 = Yes and also the other way around F12 to No if F11 = Yes, so only 1 of these cells can say Yes, but they both can say No.
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before:
Column A Column B
one test
one test
two test
two test
three test
three test
After:
Column A Column B
one test
one test
Coz two............................
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
I would like to create a combo box however the contents of the combo box depends on what i have selected in a previous combo box.
View 2 Replies View RelatedI want to use vlookup and pull the data from table1. But when the user selects Grand Total from the drop down, I want the data to be pulled from Table2. Please see attached for more clarification.
View 3 Replies View RelatedThe form consists of 3 or 4 combo boxes and a few text boxes.
There are two worksheets "Data" and "ComboInfo".
Worksheet "ComboInfo" has 4 columns to represent the drop-down data.
I want the user to select a value in combo1. This will then repopulate and filter the list in combo2 with rows that matching combo1. I want to repeat the process for the other combo boxes.
Once the combo boxes are completed and a few additional textboxes the data needs to applied to the "Data" worksheet.
My main stumbling block is Filtering the Combo2.AddItem.
I want to make a combo box in excel that, if i select it the sheet inside the combo box will appear.
Example:
Inside of combox are: Sheet1
Sheet2
Sheet3
If i click combo box and i choose sheet3 the sheet3 will appear.
How can i do this? theirs a macro code to use?
I have a list of insurance companies as column headers (B1:U1) and a list of what types of insurance they sell as row headers (A2:A6). Within the table, there is a "O" if they sell that type of insurance, and blank if they do not sell the insurance.
My first combo box is the list of insurance companies. I want my second combo box to be populated with only the types of insurance that particular company sells.
I have a worksheet in which i have a set of data similar to the following (i have used colons as delimiters in this example).........
Basically what i want is 2 combo boxes. The first combo bow will allow you to select the phone type (e.g. Motorola PEBL, Motorola RAZR etc etc). The second combo box will have a list of items which match up to the value selected in the first combo box. Once the item has been selected from the 2nd combo box then the relevant matching data will be shown in a group of cells on the worksheet on which the combo boxes reside.
I know that this could be done by using the data validation feature if my data were laid out in a different way however it is not possible for me to re-lay out all the data in my worksheet. I have been told that there my problem copuld be potentially solved by using Excel VB but unfortanately my VB skills are quite weak.
Two part question:
1. How do I structure an IF statement based on a specific cell color (e.g. if a cell is yellow, then perform function x)
2. How do I know what color is what? Is there a pantone reference? A color "name" that excel uses?
I want a range to be filled based on 2 cell values in my sheet. The autofill range should be filled based on the values in the input range. For instance in cell A1 I place the value 1 and in cell A2 I place the value 10, then the macro should automatically fill in the numbers from 1 to 10 in another column. If I change for instance the input values to 5 and 15, then the autofill range should fill up the numbers from 5 to 15.
View 4 Replies View RelatedCell A1 can be left blank or have any value 1 to 99999 inserted by the user. Default value is null. My data starts on row 5 and currently goes to row 62, but will include more rows over time. I want to automatically hide rows 5 to 62 (and higher later on) where the value in Column C (C5, C6, C7, etc) is less than or equal to the value in A1 as long as A1 isn't null. If A1 is null, then no row hiding would be done. Ideally would be great to have msg also that says "No rows hidden" or "10 rows hidden", but not critical - just nice to have if you can provide such easily and quickly otherwise I'll just try to learn it later on.
View 7 Replies View Related
